summaryrefslogtreecommitdiffstats
path: root/stdlib/setcontext.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2016-08-01Update libc.pot and NEWS.Carlos O'Donell3-187/+425
2016-08-02sparc: remove ceil, floor, trunc sparc specific implementationsAurelien Jarno47-2245/+64
The ceil, floor and trunc functions on sparc do not fully follow the standard and trigger an inexact exception when presented a value which is not an integer. Since glibc 2.24 this causes a few tests to fail, for instance: testing double (without inline functions) Failure: ceil (lit_pi): Exception "Inexact" set Failure: ceil (-lit_pi): Exception "Inexact" set Failure: ceil (min_subnorm_value): Exception "Inexact" set Failure: ceil (min_value): Exception "Inexact" set Failure: ceil (0.1): Exception "Inexact" set Failure: ceil (0.25): Exception "Inexact" set Failure: ceil (0.625): Exception "Inexact" set Failure: ceil (-min_subnorm_value): Exception "Inexact" set Failure: ceil (-min_value): Exception "Inexact" set Failure: ceil (-0.1): Exception "Inexact" set Failure: ceil (-0.25): Exception "Inexact" set Failure: ceil (-0.625): Exception "Inexact" set I tried to fix that by using the same strategy than used on other architectures, that is by saving the FSR register at the beginning and restoring it at the end of the function. When doing so I noticed a comment that this operation might be very costly, so I decided to do some benchmarks. The benchmarks below represent the time required to run each of the function 60 millions of times with different input value. I have done that in the basic V9 code, the VIS2 code, and using the default C implementation of the libc, for both sparc32 and sparc64, on a Niagara T1 based machine and an UltraSparc IIIi. Given I don't have access to a more recent machine), I haven't been able to test the VIS3 version. Also it should be noted that it doesn't make sense to do this benchmark for V8 or earlier as in that case we use the default C implementation. The results are available in the table below, the "+ fix" version correspond to the one saving and restoring the FSR. Niagara T1 / sparc32 -------------------- ceilf ceil floorf floor truncf trunc V9 19.10 22.48 19.10 22.48 16.59 19.27 V9 + fix 19.77 23.34 19.77 23.33 17.27 20.12 VIS2 16.87 19.62 16.87 19.62 VIS2 + fix 17.55 20.47 17.55 20.47 C impl 11.39 13.80 11.40 13.80 10.88 10.84 Niagara T1 / sparc64 -------------------- ceilf ceil floorf floor truncf trunc V9 18.14 22.23 18.14 22.23 15.64 19.02 V9 + fix 18.82 23.08 18.82 23.08 16.32 19.87 VIS2 15.92 19.37 15.92 19.37 VIS2 + fix 16.59 20.22 16.59 20.22 C impl 11.39 13.60 11.39 15.36 10.88 12.65 UltraSparc IIIi / sparc32 ------------------------- ceilf ceil floorf floor truncf trunc V9 4.81 7.09 6.61 11.64 4.91 7.05 V9 + fix 7.20 10.42 7.14 10.54 6.76 9.47 VIS2 4.81 7.03 4.76 7.13 VIS2 + fix 6.76 9.51 6.71 9.63 C impl 3.88 8.62 3.90 9.45 3.57 6.62 UltraSparc IIIi / sparc64 ------------------------- ceilf ceil floorf floor truncf trunc V9 3.48 4.39 3.48 4.41 3.01 3.85 V9 + fix 4.76 5.90 4.76 5.90 4.86 6.26 VIS2 2.95 3.61 2.95 3.61 VIS2 + fix 4.24 5.37 4.30 7.97 C impl 3.63 4.89 3.62 6.38 3.33 4.03 The first thing that should be noted is that the C implementation is always faster on the Niagara T1 based machine. On the UltraSparc IIIi the float version on sparc32 is also faster. Coming back about the fix saving and restoring the FSR, it appears it has a big impact as expected. In that case the C implementation is always faster than the fixed implementations. This patch therefore removes the sparc specific implementations in favor of the generic ones. Changelog: * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile [$(subdir) = math] (libm-sysdep_routines): Remove. [$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines): Remove s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3, s_truncf-vis3, s_trunc-vis3. * sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis2.S: Delete file. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis2.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis2.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis2.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis2.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis2.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis2.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis2.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: Likewise. * sysdeps/sparc/sparc64/fpu/s_ceil.S: Likewise. * sysdeps/sparc/sparc64/fpu/s_ceilf.S: Likewise. * sysdeps/sparc/sparc64/fpu/s_floor.S: Likewise. * sysdeps/sparc/sparc64/fpu/s_floorf.S: Likewise. * sysdeps/sparc/sparc64/fpu/s_trunc.S: Likewise. * sysdeps/sparc/sparc64/fpu/s_truncf.S: Likewise.
2016-07-29CVE-2016-5417 was assigned to bug 19257Florian Weimer1-0/+5
2016-07-27Don't compile do_test with -mavx/-mavx/-mavx512H.J. Lu12-78/+204
Don't compile do_test with -mavx, -mavx nor -mavx512 since they won't run on non-AVX machines. [BZ #20384] * sysdeps/x86_64/fpu/Makefile (extra-test-objs): Add test-double-libmvec-sincos-avx-main.o, test-double-libmvec-sincos-avx2-main.o, test-double-libmvec-sincos-main.o, test-float-libmvec-sincosf-avx-main.o, test-float-libmvec-sincosf-avx2-main.o and test-float-libmvec-sincosf-main.o. test-float-libmvec-sincosf-avx512-main.o. ($(objpfx)test-double-libmvec-sincos): Also link with $(objpfx)test-double-libmvec-sincos-main.o. ($(objpfx)test-double-libmvec-sincos-avx): Also link with $(objpfx)test-double-libmvec-sincos-avx-main.o. ($(objpfx)test-double-libmvec-sincos-avx2): Also link with $(objpfx)test-double-libmvec-sincos-avx2-main.o. ($(objpfx)test-float-libmvec-sincosf): Also link with $(objpfx)test-float-libmvec-sincosf-main.o. ($(objpfx)test-float-libmvec-sincosf-avx): Also link with $(objpfx)test-float-libmvec-sincosf-avx2-main.o. [$(config-cflags-avx512) == yes] (extra-test-objs): Add test-double-libmvec-sincos-avx512-main.o and ($(objpfx)test-double-libmvec-sincos-avx512): Also link with $(objpfx)test-double-libmvec-sincos-avx512-main.o. ($(objpfx)test-float-libmvec-sincosf-avx512): Also link with $(objpfx)test-float-libmvec-sincosf-avx512-main.o. (CFLAGS-test-double-libmvec-sincos.c): Removed. (CFLAGS-test-float-libmvec-sincosf.c): Likewise. (CFLAGS-test-double-libmvec-sincos-main.c): New. (CFLAGS-test-double-libmvec-sincos-avx-main.c): Likewise. (CFLAGS-test-double-libmvec-sincos-avx2-main.c): Likewise. (CFLAGS-test-float-libmvec-sincosf-main.c): Likewise. (CFLAGS-test-float-libmvec-sincosf-avx-main.c): Likewise. (CFLAGS-test-float-libmvec-sincosf-avx2-main.c): Likewise. (CFLAGS-test-float-libmvec-sincosf-avx512-main.c): Likewise. (CFLAGS-test-double-libmvec-sincos-avx.c): Set to -DREQUIRE_AVX. (CFLAGS-test-float-libmvec-sincosf-avx.c ): Likewise. (CFLAGS-test-double-libmvec-sincos-avx2.c): Set to -DREQUIRE_AVX2. (CFLAGS-test-float-libmvec-sincosf-avx2.c ): Likewise. (CFLAGS-test-double-libmvec-sincos-avx512.c): Set to -DREQUIRE_AVX512F. (CFLAGS-test-float-libmvec-sincosf-avx512.c): Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos.c: Rewritten. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf.c: Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx-main.c: New file. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx2-main.c: Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx512-main.c: Likewise. * sysdeps/x86_64/fpu/test-double-libmvec-sincos-main.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx-main.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx2-main.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx512-main.c: Likewise. * sysdeps/x86_64/fpu/test-float-libmvec-sincosf-main.c: Likewise.
2016-07-27Nios II localplt.data update: remove __eqsf2Chung-Lin Tang2-1/+4
2016-07-21powerpc: Fix missing verb and typo in comment about AT_HWCAP entryGustavo Romero2-2/+7
Fix missing verb and typo in comment about AT_HWCAP entry, in the context of mcontext_t struct definition for PPC64 Linux kernels.
2016-07-21[AArch64] Update libm-test-ulpsSzabolcs Nagy2-4/+8
This partly reverts commit f8238ae3c7701dbd9c04028861916de64e578114 that regenerated the ulps, to make the max ulps good for gcc-5, gcc-6 and gcc-trunk as well. * sysdeps/aarch64/libm-test-ulps: Updated.
2016-07-20S390: Do not clobber r13 with memcpy on 31bit with copies >1MB.Stefan Liebler2-8/+10
If the default memcpy variant is called with a length of >1MB on 31bit, r13 is clobbered as the algorithm is switching to mvcle. The mvcle code returns without restoring r13. All other cases are restoring r13. If memcpy is called from outside libc the ifunc resolver will only select this variant if running on machines older than z10. Otherwise or if memcpy is called from inside libc, this default memcpy variant is called. The testcase timezone/tst-tzset is triggering this issue in some combinations of gcc versions and optimization levels. This bug was introduced in commit 04bb21ac93e90d7696bcaf8febe2b2dd2d83585a and thus is a regression compared to former glibc 2.23 release. This patch removes the usage of r13 at all. Thus it is not saved and restored. The base address for execute-instruction is now stored in r5 which is obtained after r5 is not needed anymore as 256byte block counter. ChangeLog: * sysdeps/s390/s390-32/memcpy.S (memcpy): Eliminate the usage of r13 as it is not restored in mvcle case.
2016-07-19microblaze: fix variable name collision with syscall macrosMike Frysinger2-21/+28
If a function passes in a variable named "ret", the code will miscompile when it declares a local ret variable. In some cases, it's even a build failure like so: ../sysdeps/unix/sysv/linux/spawni.c: In function '__spawni_child': ../sysdeps/unix/sysv/linux/spawni.c:289:5: error: address of register variable 'ret' requested while (write_not_cancel (p, &ret, sizeof ret) < 0)
2016-07-19elf/elf.h: Add missing Meta relocationsWill Newton2-0/+23
2016-07-19 Will Newton <will.newton@gmail.com> * elf/elf.h (R_METAG_REL8, R_METAG_REL16, R_METAG_TLS_GD R_METAG_TLS_LDM, R_METAG_TLS_LDO_HI16, R_METAG_TLS_LDO_LO16, R_METAG_TLS_LDO, R_METAG_TLS_IE, R_METAG_TLS_IENONPIC, R_METAG_TLS_IENONPIC_HI16, R_METAG_TLS_IENONPIC_LO16, R_METAG_TLS_LE, R_METAG_TLS_LE_HI16, R_METAG_TLS_LE_LO16): New.
2016-07-18i386: Compile rtld-*.os with -mno-sse -mno-mmx -mfpmath=387H.J. Lu2-2/+13
Compile i386 rtld-*.os with -mno-sse -mno-mmx -mfpmath=387 so that no code in ld.so uses mm/xmm/ymm/zmm registers on i386 since the first 3 mm/xmm/ymm/zmm registers are used to pass vector parameters which must be preserved. * sysdeps/i386/Makefile (rtld-CFLAGS): New. [subdir == elf] (CFLAGS-.os): Replace -mno-sse -mno-mmx -mfpmath=387 with $(rtld-CFLAGS). [subdir != elf] (CFLAGS-.os): Compile rtld-*.os with $(rtld-CFLAGS).
2016-07-18elf: Define missing Meta architecture specific relocationsKhem Raj2-0/+64
2016-07-18Fix cos computation for multiple precision fallback (bz #20357)Siddhesh Poyarekar4-2/+221
During the sincos consolidation I made two mistakes, one was a logical error due to which cos(0x1.8475e5afd4481p+0) returned sin(0x1.8475e5afd4481p+0) instead. The second issue was an error in negating inputs for the correct quadrants for sine. I could not find a suitable test case for this despite running a program to search for such an input for a couple of hours. Following patch fixes both issues. Tested on x86_64. Thanks to Matt Clay for identifying the issue. [BZ #20357] * sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition to call __mpsin/__mpcos and to negate values. * math/auto-libm-test-in: Add test. * math/auto-libm-test-out: Regenerate.
2016-07-18Don't install the internal header grp-merge.hZack Weinberg2-1/+5
grp-merge.h was introduced in Stephen Gallagher's patch adding the "group merging" feature to NSS. It declares two functions, __copy_grp and __merge_grp, both of which are tagged 'internal_function', which means that nobody can even compile the contents of the header without access to libc-symbols.h, which is not installed. (Also, these functions are GLIBC_PRIVATE exports from libc.so.) Hence I believe grp-merge.h should not be installed either. This really needs to be in 2.24, so that no released version of the library installs this header. I hope that what I did to the ChangeLog diff will allow it to be applied without hassle. * grp/Makefile: Don't install the internal header grp-merge.h.
2016-07-18[AArch64] Regenerate libm-test-ulpsSzabolcs Nagy2-10/+14
* sysdeps/aarch64/libm-test-ulps: Regenerated.
2016-07-13Fix TABDLY valueSamuel Thibault2-1/+5
* bits/termios.h (TABDLY): Change macro to include TAB3 bit too.
2016-07-13Refactor Linux raise implementation (BZ#15368)Adhemerval Zanella4-50/+90
This patch changes both the nptl and libc Linux raise implementation to avoid the issues described in BZ#15368. The strategy used is summarized in bug report first comment: 1. Block all signals (including internal NPTL ones); 2. Get pid and tid directly from syscall (not relying on cached values); 3. Call tgkill; 4. Restore old signal mask. Tested on x86_64 and i686. [BZ #15368] * sysdeps/unix/sysv/linux/nptl-signals.h (__nptl_clear_internal_signals): New function. (__libc_signal_block_all): Likewise. (__libc_signal_block_app): Likewise. (__libc_signal_restore_set): Likewise. * sysdeps/unix/sysv/linux/pt-raise.c (raise): Use Linux raise.c implementation. * sysdeps/unix/sysv/linux/raise.c (raise): Reimplement to not use the cached pid/tid value in pthread structure.
2016-07-13Regenerate i686 libm-test-ulps with GCC 6.1 at -O3 [BZ #20347]H.J. Lu2-2/+7
This fixes with GCC 6.1 and -O3 on i686: Failure: Test: j0_downward (0xap+0) Result: is: -2.45935813e-01 -0x1.f7ad32p-3 should be: -2.45935768e-01 -0x1.f7ad2cp-3 difference: 4.47034835e-08 0x1.800000p-25 ulp : 3.0000 max.ulp : 2.0000 Maximal error of `j0_downward' is : 3 ulp accepted: 2 ulp [BZ #20347] * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Regenerated.
2016-07-12x86-64: Add p{read,write}[v]64 to syscalls.list [BZ #20348]H.J. Lu2-0/+10
64-bit off_t in pread64, preadv, pwrite64 and pwritev syscalls is passed in one 64-bit register for both x32 and x86-64. Since the inline asm statement only passes long, which is 32-bit for x32, in registers, 64-bit off_t is truncated to 32-bit on x32. Since __ASSUME_PREADV and __ASSUME_PWRITEV are defined unconditionally, these syscalls can be implemented in syscalls.list to pass 64-bit off_t in one 64-bit register. Tested on x86-64 and x32 with off_t > 4GB on pread64/pwrite64 and preadv64/pwritev64. [BZ #20348] * sysdeps/unix/sysv/linux/x86_64/syscalls.list: Add pread64, preadv64, pwrite64 and pwritev64.
2016-07-12Test p{read,write}64 with offset > 4GBH.J. Lu4-87/+148
Test p{read,write}64 with offset > 4GB. Since it is not an error for a successful pread/pwrite call to transfer fewer bytes than requested, we should check if the return value is -1. No need to close and unlink temporary file, which is handled by test-skeleton.c. [BZ #20350] * posix/tst-preadwrite.c: Renamed to ... * posix/tst-preadwrite-common.c: This. (PREAD): Removed. (PWRITE): Likewise. (STRINGIFY): Likewise. (STRINGIFY2): Likewise. (do_prepare): Make it static and remove function arguments. (do_test): Likewise. (PREPARE): Updated. (TEST_FUNCTION): New. (name): Make it static. (fd): Likewise. (do_prepare): Use create_temp_file. (do_test): Renamed to ... (do_test_with_offset): This. Make it static and accept offset. Properly check return value of PWRITE and PREAD. Return bytes read. Don't close fd nor unlink name. * posix/tst-preadwrite.c: Rewrite. * posix/tst-preadwrite64.c: Likewise.
2016-07-12x86-64: Properly align stack in _dl_tlsdesc_dynamic [BZ #20309]H.J. Lu7-6/+192
Since _dl_tlsdesc_dynamic is called via PLT, we need to add 8 bytes for push in the PLT entry to align the stack. [BZ #20309] * configure.ac (have-mtls-dialect-gnu2): Set to yes if -mtls-dialect=gnu2 works. * configure: Regenerated. * elf/Makefile [have-mtls-dialect-gnu2 = yes] (tests): Add tst-gnu2-tls1. (modules-names): Add tst-gnu2-tls1mod. ($(objpfx)tst-gnu2-tls1): New. (tst-gnu2-tls1mod.so-no-z-defs): Likewise. (CFLAGS-tst-gnu2-tls1mod.c): Likewise. * elf/tst-gnu2-tls1.c: New file. * elf/tst-gnu2-tls1mod.c: Likewise. * sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Add 8 bytes for push in the PLT entry to align the stack.
2016-07-11X86-64: Define LO_HI_LONG to skip pos_h [BZ #20349]H.J. Lu2-0/+9
Define LO_HI_LONG to skip pos_h since it is ignored by kernel: static inline loff_t pos_from_hilo(unsigned long high, unsigned long low) { #define HALF_LONG_BITS (BITS_PER_LONG / 2) return (((loff_t)high << HALF_LONG_BITS) << HALF_LONG_BITS) | low; } where size of loff_t == size of long. [BZ #20349] * sysdeps/unix/sysv/linux/x86_64/sysdep.h (LO_HI_LONG): New.
2016-07-11Revert "Add pretty printers for the NPTL lock types"Siddhesh Poyarekar24-2438/+1
This reverts commit 62ce266b0b261def2c6329be9814ffdcc11964d6. The change is not mature enough because it needs the following fixes: 1. Redirect test output to a file like other tests 2. Eliminate the need to use a .gdbinit because distributions will break without it. I should have caught that but I was in too much of a hurry to get the patch in :/ 3. Feature checking during configure to determine things like minimum required gdb version, python-pexpect version, etc. to make sure that tests work correctly.