laptop-kernel/arch/score, branch master

arch: remove score port

2018-03-09T22:20:01Z

The Sunplus S+core architecture was added in 2009 by Chen Liqin, who has been co-maintaining it with Lennox Wu since then, but after they both left the company, nobody else has shown any interest in the port and it has seen almost no activity other than tree-wide changes. The gcc port was removed a few years ago due to the inactivity. While the sunplus website still advertises products with unspecified RISC cores that might be S+core based, it's very clear that the Linux port is completely abandoned at this point. This removes all files related to the architecture. Acked-by: Lennox Wu Link: http://www.sunplus.com/ Signed-off-by: Arnd Bergmann

arch/score/kernel/setup.c: combine two seq_printf() calls into one call in show_cpuinfo()

2018-02-07T02:32:47Z

Some data were printed into a sequence by two separate function calls. Print the same data by a single function call instead. This issue was detected by using the Coccinelle software. Link: http://lkml.kernel.org/r/ddcfff3a-9502-6ce0-b08a-365eb55ce958@users.sourceforge.net Signed-off-by: Markus Elfring Cc: Chen Liqin Cc: Lennox Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2018-02-02T00:56:07Z

Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...

Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-01-31T01:58:07Z

Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...

Construct init thread stack in the linker script rather than by union

2018-01-09T23:21:02Z

Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells Tested-by: Tony Luck Tested-by: Will Deacon (arm64) Tested-by: Palmer Dabbelt Acked-by: Thomas Gleixner

arch: Remove clkdev.h asm-generic from Kbuild

2018-01-03T17:02:11Z

Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King Acked-by: Arnd Bergmann Cc: Acked-by: Geert Uytterhoeven [m68k] Signed-off-by: Stephen Boyd

bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type

2017-12-05T14:02:40Z

Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner Reviewed-and-tested-by: Thomas Richter Acked-by: Alexei Starovoitov Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Arnd Bergmann Cc: Daniel Borkmann Signed-off-by: Daniel Borkmann

switch wrapper poll.h instances to generic-y

2017-11-27T21:19:51Z

Signed-off-by: Al Viro

License cleanup: add SPDX license identifier to uapi header files with no license

2017-11-02T10:19:54Z

Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman