laptop-kernel/drivers/clocksource, branch master

clocksource/drivers/clps711x: Fix resource leaks in error paths

2025-10-19T14:36:59Z

commit cd32e596f02fc981674573402c1138f616df1728 upstream. The current implementation of clps711x_timer_init() has multiple error paths that directly return without releasing the base I/O memory mapped via of_iomap(). Fix of_iomap leaks in error paths. Fixes: 04410efbb6bc ("clocksource/drivers/clps711x: Convert init function to return error") Fixes: 2a6a8e2d9004 ("clocksource/drivers/clps711x: Remove board support") Signed-off-by: Zhen Ni Signed-off-by: Daniel Lezcano Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250814123324.1516495-1-zhen.ni@easystack.cn Signed-off-by: Greg Kroah-Hartman

clocksource/drivers/tegra186: Avoid 64-bit division

2025-10-15T10:03:37Z

[ Upstream commit 409f8fe03e08f92bf5be96cedbcd7a3e8fb2eeaf ] The newly added function causes a build failure on 32-bit targets with older compiler version such as gcc-10: arm-linux-gnueabi-ld: drivers/clocksource/timer-tegra186.o: in function `tegra186_wdt_get_timeleft': timer-tegra186.c:(.text+0x3c2): undefined reference to `__aeabi_uldivmod' The calculation can trivially be changed to avoid the division entirely, as USEC_PER_SEC is a multiple of 5. Change both such calculation for consistency, even though gcc apparently managed to optimize the other one properly already. [dlezcano : Fixed conflict with 20250614175556.922159-2-linux@roeck-us.net ] Fixes: 28c842c8b0f5 ("clocksource/drivers/timer-tegra186: Add WDIOC_GETTIMELEFT support") Signed-off-by: Arnd Bergmann Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20250620111939.3395525-1-arnd@kernel.org Signed-off-by: Sasha Levin

clocksource/drivers/timer-tegra186: Avoid 64-bit divide operation

2025-10-15T10:03:36Z

[ Upstream commit 916aa36042db8ee230543ffe0d192f900e8b8c9f ] Building the driver on xtensa fails with tensa-linux-ld: drivers/clocksource/timer-tegra186.o: in function `tegra186_timer_remove': timer-tegra186.c:(.text+0x350): undefined reference to `__udivdi3' Avoid the problem by rearranging the offending code to avoid the 64-bit divide operation. Fixes: 28c842c8b0f5 ("clocksource/drivers/timer-tegra186: Add WDIOC_GETTIMELEFT support") Signed-off-by: Guenter Roeck Signed-off-by: Daniel Lezcano Reviewed-by: Jon Hunter Cc: Pohsun Su Cc: Robert Lin Link: https://lore.kernel.org/r/20250614175556.922159-1-linux@roeck-us.net Signed-off-by: Sasha Levin

Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-07-29T21:02:53Z

Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const

Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2025-07-29T00:16:12Z

Pull hardening updates from Kees Cook: - Introduce and start using TRAILING_OVERLAP() helper for fixing embedded flex array instances (Gustavo A. R. Silva) - mux: Convert mux_control_ops to a flex array member in mux_chip (Thorsten Blum) - string: Group str_has_prefix() and strstarts() (Andy Shevchenko) - Remove KCOV instrumentation from __init and __head (Ritesh Harjani, Kees Cook) - Refactor and rename stackleak feature to support Clang - Add KUnit test for seq_buf API - Fix KUnit fortify test under LTO * tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits) sched/task_stack: Add missing const qualifier to end_of_stack() kstack_erase: Support Clang stack depth tracking kstack_erase: Add -mgeneral-regs-only to silence Clang warnings init.h: Disable sanitizer coverage for __init and __head kstack_erase: Disable kstack_erase for all of arm compressed boot code x86: Handle KCOV __init vs inline mismatches arm64: Handle KCOV __init vs inline mismatches s390: Handle KCOV __init vs inline mismatches arm: Handle KCOV __init vs inline mismatches mips: Handle KCOV __init vs inline mismatch powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON configs/hardening: Enable CONFIG_KSTACK_ERASE stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth stackleak: Rename STACKLEAK to KSTACK_ERASE seq_buf: Introduce KUnit tests string: Group str_has_prefix() and strstarts() kunit/fortify: Add back "volatile" for sizeof() constants acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings ...

arm: Handle KCOV __init vs inline mismatches

2025-07-22T04:43:39Z

When KCOV is enabled all functions get instrumented, unless the __no_sanitize_coverage attribute is used. To prepare for __no_sanitize_coverage being applied to __init functions, we have to handle differences in how GCC's inline optimizations get resolved. For arm this exposed several places where __init annotations were missing but ended up being "accidentally correct". Fix these cases and force several functions to be inline with __always_inline. Acked-by: Nishanth Menon Acked-by: Lee Jones Reviewed-by: Nishanth Menon Link: https://lore.kernel.org/r/20250717232519.2984886-5-kees@kernel.org Signed-off-by: Kees Cook

clocksource: hyper-v: Fix warnings for missing export.h header inclusion

2025-07-09T23:46:06Z

Fix below warning in Hyper-V clocksource driver that comes when kernel is compiled with W=1 option. Include export.h in driver files to fix it. * warning: EXPORT_SYMBOL() is used, but #include is missing Signed-off-by: Naman Jain Reviewed-by: Saurabh Sengar Link: https://lore.kernel.org/r/20250611100459.92900-5-namjain@linux.microsoft.com Signed-off-by: Wei Liu Message-ID: <20250611100459.92900-5-namjain@linux.microsoft.com>

time/timecounter: Fix the lie that struct cyclecounter is const

2025-07-01T13:38:25Z

In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh

Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2025-06-03T18:53:55Z

Pull MFD updates from Lee Jones: "Samsung Exynos ACPM: - Populate child platform devices from device tree data - Introduce a new API, 'devm_acpm_get_by_node()', for child devices to get the ACPM handle ROHM PMICs: - Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver - Add support for controlling the BD96802 using the BD96801 regulator driver - Add support to the BD96805, which is almost identical to the BD96801 - Add support to the BD96806, which is similar to the BD96802 Maxim MAX77759: - Add a core driver for the MAX77759 companion PMIC - Add a GPIO driver for the expander functions on the MAX77759 - Add an NVMEM driver to expose the non-volatile memory on the MAX77759 STMicroelectronics STM32MP25: - Add support for the STM32MP25 SoC to the stm32-lptimer - Add support for the STM32MP25 to the clocksource driver, handling new register access requirements - Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs Broadcom BCM590xx: - Add support for the BCM59054 PMU - Parse the PMU ID and revision to support behavioral differences between chip revisions - Add regulator support for the BCM59054 Samsung S2MPG10: - Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C Exynos ACPM: - Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption - Allow PMIC access during late system shutdown by switching to 'udelay()' instead of a sleeping function - Fix an issue where reading command results longer than 8 bytes would fail - Silence non-error '-EPROBE_DEFER' messages during boot to clean up logs Exynos LPASS: - Fix an error handling path by switching to 'devm_regmap_init_mmio()' to prevent resource leaks - Fix a bug where 'exynos_lpass_disable()' was called twice in the remove function - Fix another resource leak in the probe's error path by using 'devm_add_action_or_reset()' Samsung SEC: - Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings - Fix the core driver to correctly handle errors from 'sec_irq_init()' instead of ignoring them STMPE-SPI: - Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro MAINTAINERS: - Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference Maxim Drivers: - Correct the spelling of "Electronics" in Samsung copyright headers across multiple files General: - Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705, max8925, rt5033, and sprd-sc27xx drivers Samsung SEC Drivers: - Split the driver into a transport-agnostic core ('sec-core') and transport-specific ('sec-i2c', 'sec-acpm') modules to support non-I2C devices - Merge the 'sec-core' and 'sec-irq' modules to reduce memory consumption - Move internal APIs to a private header to clean up the public API - Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper macros like 'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG' - Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity - Rework platform data and regmap instantiation to use OF match data instead of a large switch statement ROHM BD96801/2: - Prepare the driver for new models by separating chip-specific data into its own structure - Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification Broadcom BCM590xx: - Refactor the regulator driver to store descriptions in a table to ease support for new chips - Rename BCM59056-specific data to prepare for the addition of other regulators - Use 'dev_err_probe()' for cleaner error handling Exynos ACPM: - Correct kerneldoc warnings and use the conventional 'np' argument name General MFD: - Convert 'aat2870' and 'tps65010' to use the per-client debugfs directory provided by the I2C core - Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line value setter callbacks - Constify 'regmap_irq_chip' and other structures in '88pm886' to move data to read-only sections BCM590xx: - Drop the unused "id" member from the 'bcm590xx' struct in preparation for a replacement Samsung SEC Core: - Remove forward declarations for functions that no longer exist SM501: - Remove the unused 'sm501_find_clock()' function New Compatibles: - Google: Add a PMIC child node to the 'google,gs101-acpm-ipc' binding - ROHM: Add new bindings for 'rohm,bd96802-regulator' and 'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806 - Maxim: Add new bindings for 'maxim,max77759-gpio', 'maxim,max77759-nvmem', and the top-level 'maxim,max77759' - STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding - Broadcom: Add 'bcm59054' compatible - Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and 'microchip,sama7d65-secumod' compatibles - Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD binding - MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc', and 'mt8365-infracfg-nao' - Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic' syscon compatibles Refactoring & Cleanup: - Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts - Convert the Microchip AT91 secumod binding to YAML - Drop unrelated consumer nodes from binding examples to reduce bloat - Correct indentation and style in various DTS examples" * tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits) mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers mfd: maxim: Correct Samsung "Electronics" spelling in headers mfd: sm501: Remove unused sm501_find_clock mfd: 88pm886: Constify struct regmap_irq_chip and some other structures dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind mfd: rt5033: Fix wakeup source leaks on device unbind mfd: max8925: Fix wakeup source leaks on device unbind mfd: max77705: Fix wakeup source leaks on device unbind mfd: max77541: Fix wakeup source leaks on device unbind mfd: max14577: Fix wakeup source leaks on device unbind mfd: as3722: Fix wakeup source leaks on device unbind mfd: 88pm886: Fix wakeup source leaks on device unbind dt-bindings: mfd: Correct indentation and style in DTS example dt-bindings: mfd: Drop unrelated nodes from DTS example dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE dt-bindings: mfd: syscon: Add mt7988-topmisc mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe() ...

Merge tag 'timers-clocksource-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-05-27T16:01:26Z

Pull clocksource updates from Thomas Gleixner: "Updates for clocksource/clockevent drivers: - The final conversion of text formatted device tree binding to schemas - A new driver fot the System Timer Module on S32G NXP SoCs - A new driver fot the Econet HPT timer - The usual improvements and device tree binding updates" * tag 'timers-clocksource-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) clocksource/drivers/renesas-ostm: Unconditionally enable reprobe support dt-bindings: timer: renesas,ostm: Document RZ/V2N (R9A09G056) support dt-bindings: timer: Convert marvell,armada-370-timer to DT schema dt-bindings: timer: Convert ti,keystone-timer to DT schema dt-bindings: timer: Convert st,spear-timer to DT schema dt-bindings: timer: Convert socionext,milbeaut-timer to DT schema dt-bindings: timer: Convert snps,arc-timer to DT schema dt-bindings: timer: Convert snps,archs-rtc to DT schema dt-bindings: timer: Convert snps,archs-gfrc to DT schema dt-bindings: timer: Convert lsi,zevio-timer to DT schema dt-bindings: timer: Convert jcore,pit to DT schema dt-bindings: timer: Convert img,pistachio-gptimer to DT schema dt-bindings: timer: Convert ezchip,nps400-timer to DT schema dt-bindings: timer: Convert cirrus,clps711x-timer to DT schema dt-bindings: timer: Convert altr,timer-1.0 to DT schema dt-bindings: timer: Add ESWIN EIC7700 CLINT clocksource/drivers: Add EcoNet Timer HPT driver dt-bindings: timer: Add EcoNet EN751221 "HPT" CPU Timer dt-bindings: timer: Convert arm,mps2-timer to DT schema dt-bindings: timer: Add Sophgo SG2044 ACLINT timer ...