laptop-kernel/drivers/net/wireless/intersil, branch master

wifi: p54: validate firmware record lengths

2026-09-21T14:30:25Z

The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state. Assisted-by: LLM Codex Signed-off-by: Heyang Tan Tested-by: Christian Lamparter Link: https://patch.msgid.link/20260918083349.891-1-thy15333007817@163.com Signed-off-by: Johannes Berg

wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST

2026-09-04T08:12:59Z

The PDR_INTERFACE_LIST loop only checks that the record start is within the entry before reading an entire struct exp_if from it. A truncated trailing record makes the if_id/variant reads cross the entry boundary into the heap beyond the EEPROM buffer (verified with a KASAN reproducer of the loop). The variant also feeds the synth front-end selection, so this is not only a leak. Advance only while a full record still fits in the entry. Fixes: eff1a59c48e3 ("[P54]: add mac80211-based driver for prism54 softmac hardware") Cc: stable@vger.kernel.org Acked-by: Christian Lamparter Assisted-by: GLM:5.3 Signed-off-by: Shengzhuo Wei Link: https://patch.msgid.link/20260831-p54-pda-validation-v2-2-dae566b388c8@cherr.cc Signed-off-by: Johannes Berg

wifi: p54: validate curve data length in the calibration curve converters

2026-09-04T08:12:59Z

p54_convert_rev0() and p54_convert_rev1() read calibration curve data from the device-supplied EEPROM entry using channel and points-per-channel counts taken verbatim from that same entry, so an entry that declares more data than it carries drives an out-of-bounds read past the EEPROM buffer (verified with a KASAN reproducer of the conversion loop). The sibling converters p54_convert_output_limits() and p54_convert_db() already validate their counts against the entry length; this path was missed. Reject the entry when the counts do not fit in the entry data. Fixes: eff1a59c48e3 ("[P54]: add mac80211-based driver for prism54 softmac hardware") Cc: stable@vger.kernel.org Assisted-by: GLM:5.3 Signed-off-by: Shengzhuo Wei Link: https://patch.msgid.link/20260831-p54-pda-validation-v2-1-dae566b388c8@cherr.cc Signed-off-by: Johannes Berg

Merge tag 'wireless-2026-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2026-07-27T23:03:40Z

Johannes Berg says: ==================== wireless-next-2026-07-26 Mostly driver changes this time: - new driver mm81x for an S1G device - new driver nxpwifi for NXP devices (mostly forked off from mwifiex) - ath12k: much kernel infrastructure integration work - brcmfmac: DPP support, some Cypress part update - nl80211: per-link statistics support ==================== Link: https://patch.msgid.link/20260726105205.942922-60-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski

Merge tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2026-07-10T14:27:45Z

Johannes Berg says: ==================== Too many robustness fixes to list. Mostly for - slight out-of-bounds reads of SKBs, - leaks on error conditions, and - malformed netlink input rejection. * tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (46 commits) wifi: cfg80211: bound element ID read when checking non-inheritance wifi: brcmfmac: cyw: fix heap overflow on a short auth frame wifi: brcmfmac: initialize SDIO data work before cleanup wifi: cfg80211: validate assoc response length before status and IE access wifi: cfg80211: validate rx/tx MLME callback frame lengths before access wifi: mac80211: ibss: wait for in-flight TX on disconnect wifi: mac80211: recalculate rx_nss on IBSS peer capability update wifi: cfg80211: use wiphy work for socket owner autodisconnect wifi: mac80211: fix memory leak in ieee80211_register_hw() wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock wifi: mac80211: validate deauth frame length before reason access wifi: mac80211: avoid non-S1G AID fallback for S1G assoc wifi: cfg80211: reject empty PMSR peer lists wifi: cfg80211: reject unsupported PMSR FTM location requests wifi: cfg80211: validate PMSR FTM preamble range wifi: cfg80211: validate PMSR measurement type data wifi: nl80211: constrain MBSSID TX link ID range wifi: nl80211: validate nested MBSSID IE blobs wifi: ieee80211: validate MLE common info length wifi: cfg80211: derive S1G beacon TSF from S1G fields ... ==================== Link: https://patch.msgid.link/20260709115038.243870-3-johannes@sipsolutions.net Signed-off-by: Paolo Abeni

wifi: p54: validate RX frame length in p54_rx_eeprom_readback()

2026-07-06T12:11:07Z

p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying. Fixes: 7cb770729ba8 ("p54: move eeprom code into common library") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Acked-by: Christian Lamparter Link: https://patch.msgid.link/20260628000510.4152481-1-xmei5@asu.edu Signed-off-by: Johannes Berg

wifi: p54: update stale wireless wiki URLs

2026-07-06T10:59:05Z

The p54 wireless wiki links (wireless.wiki.kernel.org) return 404; the content moved to the Sphinx documentation site. Point them at the current wireless.docs.kernel.org pages. Signed-off-by: Anas Khan Acked-by: Christian Lamparter Link: https://patch.msgid.link/20260702102325.63955-1-anxkhn28@gmail.com Signed-off-by: Johannes Berg

Replace by more specific (c files)

2026-07-03T05:38:17Z

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

p54spi: convert to devicetree

2026-05-20T10:05:04Z

The Prism54 SPI driver hardcodes GPIO numbers and expects users to pass them as module parameters, apparently a relic from its life as a staging driver. This works because there is only one user, the Nokia N8x0 tablet. Convert this to the gpio descriptor interface and DT based probing to improve this and simplify the code at the same time. Acked-by: Christian Lamparter Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann Reviewed-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260507212451.3333185-3-arnd@kernel.org Signed-off-by: Johannes Berg

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33Z

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds