laptop-kernel/drivers/ufs/host, branch master

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2026-10-11T16:23:19Z

Pull SCSI fixes from James Bottomley: "Driver (and tape media changer) only fixes. Three of the fixes are about the same size, (ch, ufs decouble CQ and ufs avoid unsafe MMIO) but the unsafe MMIO is the least obvious logic change" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Decouple CQ sweep from request iterator in MCQ scsi: ufs: core: Avoid unsafe MMIO reads in ufshcd_mcq_compl_all_cqes_lock() scsi: ch: Do not keep references to data transfer element devices scsi: ufs: mediatek: Handle mPHY power-on failures scsi: qedi: Initialize callback state before registration scsi: ufs: core: Hold a clock reference across the probe

scsi: ufs: mediatek: Handle mPHY power-on failures

2026-10-06T01:50:54Z

The MediaTek helper enables VA09 before powering on the mPHY, but ignores the PHY result. A failure can leave VA09 enabled and publish mphy_powered_on as true, so a later power-on attempt is skipped. Check phy_power_on(), attempt to unwind VA09 on failure, and leave the state flag unchanged. Propagate the helper result from host initialization as well as its existing resume caller. Keep the original PHY error if the supply rollback also fails, and report that rollback separately. The issue was found by our static-analysis tool. Fixes: 561e3a8726b2 ("scsi: ufs-mediatek: Fix unbalanced clock on/off") Fixes: cf137b3ea49a ("scsi: ufs-mediatek: Support VA09 regulator operations") Assisted-by: gpt 5 Signed-off-by: Pengpeng Hou Reviewed-by: Peter Wang Reviewed-by: Stanley Jhu Link: https://patch.msgid.link/20260920034953.19535-1-hppiscas@163.com Signed-off-by: Martin K. Petersen (Oracle)

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2026-09-25T21:41:52Z

Pull SCSI fixes from James Bottomley: "Mostly small driver fixes. The biggest fix is the one to the block zone handling which might trip for real or virtual hardware if the number of zones is > 2^32" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: megaraid_sas: Protect megasas_get_ctrl_info() in megasas_resume() scsi: sd_zbc: Reject disks with too many zones scsi: block: Fix zones_cond out-of-bounds write on zone report scsi: leapraid: Avoid -Wformat-security warning scsi: devinfo: Add BLIST_SKIP_IO_HINTS for EMC Symmetrix scsi: libiscsi_tcp: Check the data direction of a Data-In PDU scsi: ufs: pltfrm: Add quirk for R-Car S4 lacking lanes-per-direction scsi: ufs: core: Keep internal commands dispatchable during error handling

scsi: ufs: pltfrm: Add quirk for R-Car S4 lacking lanes-per-direction

2026-09-16T01:46:36Z

Since commit e72323f3b09f ("scsi: ufs: core: Configure only active lanes during link"), the following error is observed on R-Car S4: ufshcd-renesas e6860000.ufs: Tx lane mismatch [config,reported] [2,1] ufshcd-renesas e6860000.ufs: link startup failed -67 ufshcd-renesas e6860000.ufs: error -ENOLINK: Initialization failed with error -67 ufshcd-renesas e6860000.ufs: probe with driver ufshcd-renesas failed with error -67 R-Car S4 has one UFS lane per direction, as described in section 152.1 of its hardware manual. Without lanes-per-direction, the UFS platform driver defaults to two lanes. Previously, the core used PA_CONNECTEDRXDATALANES and PA_CONNECTEDTXDATALANES to configure the link without checking them against lanes-per-direction, so the missing property did not prevent initialization. While fixing the R-Car S4 DTS is the proper solution, doing only that would still break backwards compatibility with existing DTBs. Hence add a quirk to let lanes-per-direction default to one on R-Car S4. Fixes: e72323f3b09f9c89 ("scsi: ufs: core: Configure only active lanes during link") Reported-by: Koichiro Den Closes: https://lore.kernel.org/20260911073058.253000-1-den@valinux.co.jp Cc: stable@vger.kernel.org # 7.2+ Signed-off-by: Geert Uytterhoeven Link: https://patch.msgid.link/ae0cc2bd764e6dfffce99db3d8b44a55887c508c.1789394185.git.geert+renesas@glider.be Signed-off-by: Martin K. Petersen (Oracle)

Merge tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2026-09-06T03:45:18Z

Pull kmalloc_obj conversions from Kees Cook: "Another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci" * tag 'kmalloc_obj-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: refresh kmalloc_obj() conversions drm/amd/display: Fix harmless type mismatch in allocation

treewide: refresh kmalloc_obj() conversions

2026-09-05T04:37:00Z

This is another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci This catches both the set of kmalloc() uses added since the first kmalloc_obj() conversions in v7.0 and adds a large group missed in the first pass due to Coccinelle not interacting well with the cleanup.h scoped_...() family of macros[1]. I worked around this with spatch's "--macro-file" argument to a file with all the scoped_...() macros mapped to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control flow indicator I could find. Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc, riscv, and s390 with no new warnings. Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1] Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2] Signed-off-by: Kees Cook

scsi: ufs: ufs-pci: Add MCQ support for Intel UFS 4.0 controllers

2026-08-29T02:12:57Z

The Intel UFS 4.0 PCI variant (PCI ID 8086:D335) advertises MCQ support in its capability register. However, ufshcd_alloc_mcq() also requires an .op_runtime_config hook to locate the per-queue operation and runtime (OPR) register blocks, which was not provided by this variant operations table. As a result, MCQ initialization fails and ufshcd_add_scsi_host() prints "MCQ mode is disabled, err=%d\n" before falling back to legacy single-doorbell (SDB) mode. Add ufs_intel_mcq_config_resource() to initialize the MCQ configuration base and add ufs_intel_op_runtime_config() to set up the OPR register offsets and stride. Wire both hooks into the variant operations table so MCQ is enabled when supported by the hardware. Fixes: 096cd6b7adf2 ("scsi: ufs: ufs-pci: Add support for Intel Nova Lake") Signed-off-by: sangram kumar yerra Reviewed-by: Adrian Hunter Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260818112830.453402-3-sangram.k.y@intel.com Signed-off-by: Martin K. Petersen (Oracle)

scsi: ufs: ufs-pci: Add support for Intel UFS 4.0 HS-Gear5

2026-08-29T02:12:57Z

Reliable HS-Gear5 operation on Intel UFS 4.0 controllers requires configuring PA_INITIAL_ADAPT before changing the power mode. Without this setting, the link fails to train reliably at Gear5. Add a pwr_change_notify() hook to configure the adaptation mode before the power mode transition. Enable this only for UFS 4.0 and later controllers by checking hba->ufs_version. Wire the hook into the existing Meteor Lake family variant operations table (ufs_intel_mtl_hba_vops) instead of introducing a separate table, since the Intel UFS 4.0 PCI variant (PCI ID 8086:D335) already uses this vops table and the hook is internally gated on UFS version >= 4.0. Use PA_INITIAL_ADAPT when the negotiated TX power mode is FAST_MODE or FASTAUTO_MODE. Otherwise, reset the adaptation mode to PA_NO_ADAPT, which is the default setting. Fixes: 096cd6b7adf2 ("scsi: ufs: ufs-pci: Add support for Intel Nova Lake") Signed-off-by: sangram kumar yerra Reviewed-by: Adrian Hunter Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260818112830.453402-2-sangram.k.y@intel.com Signed-off-by: Martin K. Petersen (Oracle)

scsi: ufs: ufs-qcom: Fix sequential read variance

2026-08-29T01:55:10Z

The current devfreq downdifferential threshold of 5% causes overly aggressive frequency downscaling, leading to performance degradation sometimes during sequential read workloads. Update the UFS devfreq downdifferential threshold to 65. This widens the hysteresis window and prevents overly aggressive downscaling, ensuring that frequency is maintained for loads above 5% and scaling down occurs only when utilization falls below this level, while scale-up still triggers above the 70% threshold. Reviewed-by: Konrad Dybcio Signed-off-by: Nitin Rawat Link: https://patch.msgid.link/20260825145203.265579-3-nitin.rawat@oss.qualcomm.com Signed-off-by: Martin K. Petersen (Oracle)

scsi: ufs: ufs-qcom: Restore HS/LS link startup mode for Qualcomm UFS controller v6.2+

2026-08-29T01:55:10Z

The link startup mode (HS LSS - high-speed link startup, or LS LSS - low-speed link startup) is decided in the boot stage based on the bootconfig GPIO. This selection is carried forward through the secondary stage bootloaders and finally to HLOS via the spare configuration register (REG_UFS_DEBUG_SPARE_CFG). On Qualcomm UFS controller v6.2 and later, bit 31 in the spare configuration register indicates the high-speed link startup mode selection, as per the Hardware Programming Guide (HPG). The spare register value is read during host driver initialization but gets cleared after UFS reset. Preserve the spare register value during initialization and restore it during link startup to maintain the bootloader-configured link startup mode. Signed-off-by: Nitin Rawat Tested-by: Mukesh Ojha Link: https://patch.msgid.link/20260825145203.265579-2-nitin.rawat@oss.qualcomm.com Signed-off-by: Martin K. Petersen (Oracle)