laptop-kernel/drivers/usb/misc, branch master

usb: misc: qcom_eud: Access EUD_MODE_MANAGER2 through secure calls

2025-10-15T10:03:42Z

[ Upstream commit c0485e864a2eaa1d5a84c71e573dd236d0e885ae ] EUD_MODE_MANAGER2 register is mapped to a memory region that is marked as read-only for operating system running at EL1, enforcing access restrictions that prohibit direct memory-mapped writes via writel(). Attempts to write to this region from HLOS can result in silent failures or memory access violations, particularly when toggling EUD (Embedded USB Debugger) state. To ensure secure register access, modify the driver to use qcom_scm_io_writel(), which routes the write operation to Qualcomm Secure Channel Monitor (SCM). SCM has the necessary permissions to access protected memory regions, enabling reliable control over EUD state. SC7280, the only user of EUD is also affected, indicating that this could never have worked on a properly fused device. Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Melody Olvera Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Souradeep Chowdhury Signed-off-by: Komal Bajaj Link: https://lore.kernel.org/r/20250731-eud_mode_manager_secure_access-v8-1-4a5dcbb79f41@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: misc: onboard_usb_dev: Add Bison Electronics Inc. Integrated Camera

2025-06-30T13:42:16Z

The Camera is built into the Thinkbook 16 G7 QOY and directly attached on the usb_2 controller (dwc3 USB2 only). It has a separate power supply that needs to be controlled for PM. Add the support for this device for the power supply. Reviewed-by: Dmitry Baryshkov Signed-off-by: Jens Glathe Link: https://lore.kernel.org/r/20250629-tb16-dt-v7-2-35276341338f@oldschoolsolutions.biz Signed-off-by: Greg Kroah-Hartman

usb: misc: apple-mfi-fastcharge: Make power supply names unique

2025-06-19T10:25:59Z

When multiple Apple devices are connected concurrently, the apple-mfi-fastcharge driver fails to probe the subsequent devices with the following error: sysfs: cannot create duplicate filename '/class/power_supply/apple_mfi_fastcharge' apple-mfi-fastcharge 5-2.4.3.3: probe of 5-2.4.3.3 failed with error -17 This happens because the driver uses a fixed power supply name ("apple_mfi_fastcharge") for all devices, causing a sysfs name conflict when a second device is connected. Fix this by generating unique names using the USB bus and device number (e.g., "apple_mfi_fastcharge_5-12"). This ensures each connected device gets a unique power supply entry in sysfs. The change requires storing a copy of the power_supply_desc structure in the per-device mfi_device struct, since the name pointer needs to remain valid for the lifetime of the power supply registration. Fixes: 249fa8217b84 ("USB: Add driver to control USB fast charge for iOS devices") Signed-off-by: Charalampos Mitrodimas Link: https://lore.kernel.org/r/20250602-apple-mfi-fastcharge-duplicate-sysfs-v1-1-5d84de34fac6@posteo.net Signed-off-by: Greg Kroah-Hartman

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37Z

Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2025-06-06T19:45:35Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.16-rc1. Included in here are the following: - USB offload support for audio devices. I think this takes the record for the most number of patch series (30+) over the longest period of time (2+ years) to get merged properly. Many props go to Wesley Cheng for seeing this effort through, they took a major out-of-tree hacked-up-monstrosity that was created by multiple vendors for their specific devices, got it all merged into a semi-coherent set of changes, and got all of the different major subsystems to agree on how this should be implemented both with changes to their code as well as userspace apis, AND wrangled the hardware companies into agreeing to go forward with this, despite making them all redo work they had already done in their private device trees. This feature offers major power savings on embedded devices where a USB audio stream can continue to flow while the rest of the system is sleeping, something that devices running on battery power really care about. There are still some more small tweaks left to be done here, and those patches are still out for review and arguing among the different hardware companies, but this is a major step forward and a great example of how to do upstream development well. - small number of thunderbolt fixes and updates, things seem to be slowing down here (famous last words...) - xhci refactors and reworking to try to handle some rough corner cases in some hardware implementations where things don't always work properly - typec driver updates - USB3 power management reworking and updates - Removal of some old and orphaned UDC gadget drivers that had not been used in a very long time, dropping over 11 thousand lines from the tree, always a nice thing, making up for the 12k lines added for the USB offload feature. - lots of little updates and fixes in different drivers All of these have been in linux-next for over 2 weeks, the USB offload logic has been in there for 8 weeks now, with no reported issues" * tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) ALSA: usb-audio: qcom: fix USB_XHCI dependency ASoC: qdsp6: fix compile-testing without CONFIG_OF usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro USB: typec: fix const issue in typec_match() USB: gadget: udc: fix const issue in gadget_match_driver() USB: gadget: fix up const issue with struct usb_function_instance USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB USB: serial: bus: fix const issue in usb_serial_device_match() usb: usbtmc: Fix timeout value in get_stb usb: usbtmc: Fix read_stb function and get_stb ioctl ALSA: qc_audio_offload: try to reduce address space confusion ALSA: qc_audio_offload: avoid leaking xfer_buf allocation ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe() usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub usb: gadget: lpc32xx_udc: Use USB API functions rather than constants usb: gadget: epautoconf: Use USB API functions rather than constants ...

Merge tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-05-27T15:31:21Z

Pull timer cleanups from Thomas Gleixner: "Another set of timer API cleanups: - Convert init_timer*(), try_to_del_timer_sync() and destroy_timer_on_stack() over to the canonical timer_*() namespace convention. There is another large conversion pending, which has not been included because it would have caused a gazillion of merge conflicts in next. The conversion scripts will be run towards the end of the merge window and a pull request sent once all conflict dependencies have been merged" * tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack() treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try() timers: Rename init_timers() as timers_init() timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA timers: Rename __init_timer_on_stack() as __timer_init_on_stack() timers: Rename __init_timer() as __timer_init() timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack() timers: Rename init_timer_key() as timer_init_key()

usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n

2025-05-23T12:32:43Z

When the USB5744 option is disabled, the onboard_usb driver warns about unused functions: drivers/usb/misc/onboard_usb_dev.c:358:12: error: 'onboard_dev_5744_i2c_write_byte' defined but not used [-Werror=unused-function] 358 | static int onboard_dev_5744_i2c_write_byte(struct i2c_client *client, u16 addr, u8 data) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/usb/misc/onboard_usb_dev.c:313:12: error: 'onboard_dev_5744_i2c_read_byte' defined but not used [-Werror=unused-function] 313 | static int onboard_dev_5744_i2c_read_byte(struct i2c_client *client, u16 addr, u8 *data) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extend the #ifdef block a little further to cover all of these functions. Ideally we'd use use if(IS_ENABLED()) instead, but that doesn't currently work because the i2c_transfer() and i2c_smbus_write_word_data() function declarations are hidden when CONFIG_I2C is disabled. Fixes: 1143d41922c0 ("usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20250523120947.2170302-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence

2025-05-21T11:14:28Z

Introduce i2c APIs to read/write for proper configuration register programming. It ensures that read-modify-write sequence is performed and reserved bit in Runtime Flags 2 register are not touched. Also legacy smbus block write inserted an extra count value into the i2c data stream which breaks the register write on the usb5744. Switching to new read/write i2c APIs fixes both issues. Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support") Cc: stable Signed-off-by: Jonathan Stroud Co-developed-by: Radhey Shyam Pandey Signed-off-by: Radhey Shyam Pandey Link: https://lore.kernel.org/r/1747398760-284021-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub

2025-05-21T11:13:58Z

The TUSB8044 is similar to the TUSB8041. This adds the PID/VID values and allows to specify the reset GPIO signal on the board. Signed-off-by: Mike Looijmans Link: https://lore.kernel.org/r/20250507131143.2243079-1-mike.looijmans@topic.nl Signed-off-by: Greg Kroah-Hartman

Merge 6.15-rc6 into usb-next

2025-05-13T06:26:58Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman