laptop-kernel/drivers/watchdog, branch master

watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog

2026-09-18T15:10:45Z

da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(), when the watchdog is left running by the driver sets WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be executed in da9063_wdt_suspend. In this case, the suspend callback is a no-op and the watchdog keeps counting during system suspend, leading to an unexpected system reset. Check WDOG_HW_RUNNING and wdd，can fix this issue. Fixes: a7ceca4398bc8 ("watchdog: da9063: optionally disable watchdog during suspend") Cc: stable@vger.kernel.org Signed-off-by: Li Jun Link: https://patch.msgid.link/20260917013710.2754679-1-lijun01@kylinos.cn Signed-off-by: Guenter Roeck

watchdog: starfive-wdt: Fix runtime PM leak in starfive_wdt_pm_start()

2026-09-17T00:45:13Z

starfive_wdt_pm_start() takes a runtime PM reference with pm_runtime_get_sync(), which increments the usage counter even when it fails, and returns the error without dropping it again. The watchdog core does not invoke the stop callback when start fails, so the reference taken on the error path is leaked. Use pm_runtime_resume_and_get() instead, which keeps the usage counter balanced when the resume fails. Fixes: db728ea9c7be ("drivers: watchdog: Add StarFive Watchdog driver") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20260916170704.2086331-1-vulab@iscas.ac.cn Signed-off-by: Guenter Roeck

watchdog: da9062: fix suspend/resume handling of HW_RUNNING watchdog

2026-09-17T00:41:28Z

da9062_wdt_suspend() and da9062_wdt_resume() only check watchdog_active(), when the watchdog is left running by the driver sets WDOG_HW_RUNNING in da9062_wdt_probe() but userspace never opens the device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be executed in da9062_wdt_suspend. In this case, the suspend callback is a no-op and the watchdog keeps counting during system suspend, leading to an unexpected system reset. Check WDOG_HW_RUNNING and wdt->wdd，can fix this issue. Fixes: f6c98b08381c7 ("watchdog: da9062: add power management ops") Cs: stable@vger.kernel.org Signed-off-by: Li Jun Link: https://patch.msgid.link/20260914062353.582205-1-lijun01@kylinos.cn Signed-off-by: Guenter Roeck

watchdog: msc313e: Fix premature reset during timeout update

2026-09-17T00:41:17Z

Updating the 32-bit hardware timeout requires writing to two 16-bit registers sequentially. If the watchdog is actively running, this non-atomic update might trigger a premature system reset. Clear the watchdog counter before updating the registers to prevent the timer from timing out prematurely against an intermediate threshold. Fixes: e9800b799464 ("watchdog: Add Mstar MSC313e WDT driver") Cc: stable@vger.kernel.org Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20260913065126.8350-1-tzungbi@kernel.org Signed-off-by: Guenter Roeck

watchdog: msc313e: Propagate error code in resume()

2026-09-17T00:39:30Z

If msc313e_wdt_start() fails during system resume, the error is currently ignored. Consequently, the watchdog isn't running without the user's knowledge. Propagate the error code and print a message if msc313e_wdt_start() fails. Signed-off-by: Tzung-Bi Shih Fixes: e9800b7994642 ("watchdog: Add Mstar MSC313e WDT driver") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260912163334.28636-1-tzungbi@kernel.org Signed-off-by: Guenter Roeck

watchdog: rzv2h: Avoid division by zero

2026-09-17T00:39:26Z

clk_get_rate() could return 0. Avoid a division by zero panic. Fixes: f6febd0a30b6 ("watchdog: Add Watchdog Timer driver for RZ/V2H(P)") Cc: stable@vger.kernel.org Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20260913064851.8239-4-tzungbi@kernel.org Signed-off-by: Guenter Roeck

watchdog: rtd119x: Avoid division by zero

2026-09-17T00:39:13Z

clk_get_rate() could return 0. Avoid a division by zero panic. Fixes: 2bdf6acbfead ("watchdog: Add Realtek RTD1295") Cc: stable@vger.kernel.org Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20260913064851.8239-3-tzungbi@kernel.org Signed-off-by: Guenter Roeck

watchdog: digicolor: Avoid division by zero

2026-09-17T00:38:52Z

clk_get_rate() could return 0. Avoid a division by zero panic. Since get_timeleft() cannot propagate errors, check the clock rate early in probe() and cache the rate in the driver data as it is unlikely to change at runtime. Fixes: 336694a01dae ("watchdog: digicolor: driver for Conexant Digicolor CX92755 SoC") Cc: stable@vger.kernel.org Signed-off-by: Tzung-Bi Shih Acked-by: Baruch Siach Link: https://patch.msgid.link/20260913064851.8239-2-tzungbi@kernel.org Signed-off-by: Guenter Roeck

watchdog: sp5100_tco: Fix pci_dev reference leak in sp5100_tco_init()

2026-09-17T00:25:50Z

sp5100_tco_init() stores the PCI device matched by for_each_pci_dev() in the global sp5100_tco_pci and keeps its reference for the lifetime of the driver, but neither sp5100_tco_exit() nor the error paths of sp5100_tco_init() call pci_dev_put(), leaking the reference on driver registration failure and on every module load/unload cycle. Drop the reference when the platform driver or device registration fails and when the module is unloaded. Fixes: 15e28bf13008 ("watchdog: Add support for sp5100 chipset TCO") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20260916170511.2086199-1-vulab@iscas.ac.cn Signed-off-by: Guenter Roeck

watchdog: msc313e: Sync timeout value if WDT was running at boot

2026-09-09T21:18:25Z

If WDT was running at boot, the hardware timeout might be set to values other than the final software timeout. To be consistent, set the hardware timeout to match the final software timeout (i.e., after watchdog_init_timeout()) if WDT was running. Fixes: ffd264bd152c ("watchdog: msc313e: Check if the WDT was running at boot") Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20260828161348.13212-8-tzungbi@kernel.org Signed-off-by: Guenter Roeck