| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On Tegra devices, uncached maps translate to device memory, causing
unaligned accesses by userspace resulting in a SIGBUS. Instead, use
write-combined maps to ensure proper access.
This would also affect discrete cards on any Arm device. It was
determined that discrete cards regardless of cpu arch should use
write-combined maps for coherent anyways. Thus this change is made for
all gpu types.
Cc: stable@vger.kernel.org
Signed-off-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Fixes: 1b4ea4c5980f ("drm/ttm: set the tt caching state at creation time")
Link: https://patch.msgid.link/20260821-tegra-coherent-wc-v2-1-2b1ddb67bf18@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
If idr_alloc() fails after create_dynamic_oa_sysfs_entry() has
succeeded, the error path frees the OA config without removing the
metrics sysfs group.
Remove the sysfs group before releasing the config, and fix up the
misleading error message copied from the sysfs creation failure path.
Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Link: https://patch.msgid.link/20260831014218.28515-1-yaolu@kylinos.cn
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2c6fbda5fdde461d6dedb82a59285182720b8fef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
nouveau_dmem_folio_free() drops chunk->callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced.
Fixes: c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-b4-nouveau-dmem-thp-fixes-v1-2-2cdf9860af2a@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already
use the saved size; use it here too.
Fixes: c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Link: https://patch.msgid.link/20260811-b4-nouveau-dmem-thp-fixes-v1-1-2cdf9860af2a@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Turns out sashiko was right, and I should protect this properly
Fixes: 34e27b90552a ("nouveau/instmem: use iomapping interface for instmem handling")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260825030615.3464436-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A successful OP_UNMAP_SPARSE marks its region dirty with
nouveau_uvma_region_dirty() and defers the teardown to
nouveau_uvmm_bind_job_cleanup(); it does not remove the region from
uvmm->region_mt.
If a later op in the job fails, the unwind path never clears reg->dirty
(set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup
skips the teardown. The region is left in the tree with dirty set and its
completion never signalled. Later binds over that range then fail
permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable
wait_for_completion() in bind_validate_region() -- for the lifetime of
the uvmm.
Clear reg->dirty when the unwind reverts the sparse unmap, restoring the
region to the state it was found in.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-nouveau-uvmm-vmbind-fixes-v2-3-aaee4b395d04@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set
from nouveau_uvma_region_find(), which only looks the region up and takes
no reference; a region's sole reference is its membership in
uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check
when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure.
The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears
op->reg; these two do not.
unwind_continue steps back one op, so the failing op is skipped by the
unwind loop and its op->reg stays set. nouveau_uvmm_bind_job_cleanup()
then enters its if (op->reg) branch and calls nouveau_uvma_region_remove()
and nouveau_uvma_region_put() on it, dropping the tree's sole reference
and freeing a region this job never created. The comment above the
cleanup loop documents the broken invariant: op->reg must be NULL on
submit failure.
This frees a live region on an unrelated failure, reachable single-job
when drm_gpuvm_sm_unmap_ops_create() returns -ENOMEM; if another job owns
the same region, its cleanup then removes and puts the freed region, a
use-after-free. Clear op->reg on both failure paths.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-nouveau-uvmm-vmbind-fixes-v2-2-aaee4b395d04@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(),
and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates
a region, so op->ops stays NULL for a successfully processed sparse map.
If a later op in the same job fails, the reverse unwind loop revisits that
op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally.
drm_gpuva_ops_free() dereferences its argument right away
(list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The
path is reachable by any render-node fd holder, since NOUVEAU_VM_BIND is
DRM_RENDER_ALLOW.
Guard the free with IS_ERR_OR_NULL(), as nouveau_uvmm_bind_job_cleanup()
already does for the identical free.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260811-nouveau-uvmm-vmbind-fixes-v2-1-aaee4b395d04@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Let's start the 7.3 drm-misc-fixes cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_pagemap_evict_to_ram() may retry eviction, but mpages retains
the count from the previous attempt. A retry can therefore continue
to the copy path even when no RAM pages were populated.
Reset mpages at the retry label so it reflects only the current
attempt.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728090304.1264759-1-arvind.yadav@intel.com
|
|
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0x750 [ttm]
[10109.861203] ? ttm_bo_alloc_resource+0xa9/0x750 [ttm]
[10109.861208] ? lock_acquire+0xc4/0x2d0
[10109.861214] ttm_bo_validate+0x94/0x1c0 [ttm]
[10109.861218] ? ww_mutex_trylock+0x19d/0x3d0
[10109.861219] ? _raw_write_unlock+0x22/0x50
[10109.861223] ttm_bo_init_reserved+0x17d/0x1f0 [ttm]
[10109.861228] xe_bo_init_locked+0x20a/0x620 [xe]
[10109.861294] ? __pfx_xe_ttm_bo_destroy+0x10/0x10 [xe]
[10109.861359] ? mark_held_locks+0x46/0x90
[10109.861361] ? __create_object+0x68/0xc0
[10109.861366] __xe_bo_create_locked+0x384/0xa20 [xe]
[10109.861432] ? lock_acquire+0xc4/0x2d0
[10109.861434] ? xe_drm_pagemap_populate_mm+0xd3/0x340 [xe]
[10109.861542] xe_bo_create_locked+0x23/0x40 [xe]
[10109.861609] xe_drm_pagemap_populate_mm+0x12e/0x340 [xe]
[10109.861707] ? __lock_acquire+0x43e/0x2930
[10109.861716] drm_pagemap_populate_mm+0x74/0xe0 [drm_gpusvm_helper]
[10109.861720] xe_svm_alloc_vram+0xb5/0x2c0 [xe]
[10109.861817] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861819] ? ktime_get+0x23/0x130
[10109.861821] ? trace_hardirqs_on+0x22/0xe0
[10109.861823] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861826] __xe_svm_handle_pagefault+0x77d/0xbf0 [xe]
[10109.861924] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861926] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861928] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861929] ? trace_hardirqs_on+0x22/0xe0
[10109.861931] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861933] ? rwsem_down_write_slowpath+0x459/0x9a0
[10109.861937] xe_svm_handle_pagefault+0x3d/0xb0 [xe]
[10109.862030] xe_pagefault_queue_work+0x1a9/0x520 [xe]
[10109.862122] process_one_work+0x239/0x730
[10109.862127] worker_thread+0x200/0x3f0
[10109.862130] ? __pfx_worker_thread+0x10/0x10
[10109.862132] kthread+0x10d/0x150
[10109.862133] ? __pfx_kthread+0x10/0x10
[10109.862135] ret_from_fork+0x3bd/0x470
[10109.862138] ? __pfx_kthread+0x10/0x10
[10109.862140] ret_from_fork_asm+0x1a/0x30
[10109.862146] </TASK>
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: Claude:claude-opus-4-8
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260810092845.2776097-1-arvind.yadav@intel.com
|
|
Updating drm-misc-fixes to the state of v7.2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
pci_match_device() can return the dummy pci_device_id_any entry
when a device is force-bound via sysfs driver_override, in which
case ->driver_data is unset (NULL). i915_pci_probe() casts it to
struct intel_device_info * unconditionally and dereferences
intel_info->require_force_probe, causing a NULL-ptr-deref.
Reported-by: syzbot+db96c5ff032f4292a8dc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=db96c5ff032f4292a8dc
Tested-by: syzbot+db96c5ff032f4292a8dc@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260813064902.367504-1-kartikey406@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 2727922084672cc274ecea726ea00363c2893731)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
dg2_power_well_count() is supposed to return an integer,
not a boolean. Make it so.
Fixes: 9112ce99c1d7 ("drm/i915/cdclk: Extract dg2_power_well_count()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260826143100.19401-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit dcf423710d0253d7d729c3992bbae0c6197c9c22)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Apparently PTL+ no longer has the cd2x pipe select field in
CDCLK_CTL. Take that into account during CDCLK sanitization.
This currently triggers a spurious CDCLK sanitization during
driver load on PTL+ which will causes a visible glitch on all
active displays.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8550
Fixes: 2ee8dbd880b1 ("drm/i915/cdclk: Fix up CDCLK_FREQ_DECIMAL without a full PLL re-enable")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260717155107.17801-1-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
(cherry picked from commit 1786d26887817a779641d3a093c66ac91382113b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
icl_plane_disable_sel_fetch_arm() wrote SEL_FETCH_PLANE_CTL = 0 only when
crtc_state->enable_psr2_sel_fetch was set. If a plane was disabled after
selective fetch had been turned off, the guard fired early and left the
register's enable bit set in hardware.
The bit is harmless until selective fetch is re-enabled. When it is, the
hardware resumes fetching for the now-disabled plane and keeps its old DDB
range reserved.
i9xx_cursor_disable_sel_fetch_arm() has the same guard on SEL_FETCH_CUR_CTL
and is fixed the same way.
v2: Add same check for cursor also. [sashiko]
Cc: stable@vger.kernel.org
Fixes: b1f5279b5981 ("drm/i915/psr: Move plane sel fetch configuration into plane source files")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8739
Assisted-by: GitHub-Copilot:claude-opus-4.6
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260818095149.2172935-1-nemesa.garg@intel.com
(cherry picked from commit 600a7c9d40e5e0c5544f42d1c9592c8d15224dc0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
DDI_CLK_VALFREQ is programmed with the port clock, which for DP is the
symbol clock computed assuming 8b/10b encoding (link_rate / 10). For
DP 128b/132b (UHBR) rates and for HDMI FRL the port clock needs to
be modified.
DDI_CLK_VALFREQ does not have any functional impact on H/w, it
only records the frequency S/w intends to set.
Use intel_ddi_link_symbol_clock() to write the correct DDI clock in
kHz
Fixes: 5ec58d714935 ("drm/i915/lt_phy: Add .enable_clock hook on DDI")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260811175844.2613721-4-suraj.kandpal@intel.com
(cherry picked from commit eaed815ca3483c227e4ec80b86d1b3ce5c2508be)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
DDI_CLK_VALFREQ is programmed with the port clock, which for DP is the
symbol clock computed assuming 8b/10b encoding (link_rate / 10). For
DP 128b/132b (UHBR) rates and for HDMI FRL the port clock needs to
be modfied.
DDI_CLK_VALFREQ does not have any functional impact on H/w, it
only records the frequency S/w intends to set.
Use intel_ddi_link_symbol_clock() to write the correct DDI clock in
kHz.
Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming")
Fixes: 73fc3abcb797 ("drm/i915/mtl: Enabling/disabling sequence Thunderbolt pll")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260811175844.2613721-3-suraj.kandpal@intel.com
(cherry picked from commit 9ac3ee6c0f92cd09893bd442964fb6b0d6813b5e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_ddi_link_symbol_clock() to return the DDI clock frequency for
a given port clock:
DP 8b/10b : rate
DP 128b/132b (UHBR) : (10 / 32) * rate
HDMI FRL : (10 / 18) * rate
HDMI TMDS : rate
The DP case reuses intel_dp_link_symbol_clock().
This will help in upcoming commits to decide value to be written
in DDI_CLK_VALFREQ.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260811175844.2613721-2-suraj.kandpal@intel.com
(cherry picked from commit 5abc20e39dd074e8696387ca6871d6e432baf0cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
mst_stream_compute_config() called intel_pfit_compute_config() twice
in a row.
commit 5ce9ac1531b8 ("drm/i915/mst: Call intel_pfit_compute_config()
for sharpness filter")
was erroneously cherry-picked to the fixes tree while
commit ca97f5546f19 ("drm/i915/mst: Call intel_pfit_compute_config()
for sharpness filter")
was already in there.
Drop the redundant duplicate call.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nemesa Garg <nemesa.garg@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 5ce9ac1531b8 ("drm/i915/mst: Call intel_pfit_compute_config() for sharpness filter")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/20260806074819.2631970-1-chaitanya.kumar.borah@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: adjusted commit message]
(cherry picked from commit ea9f3470d33602fb776ea55443467baacf66f23a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull more drm updates from Dave Airlie:
"As mentioned last week, an msm pull request fell down the side of the
couch or whatever the email equivalent of that is. This has the msm
next stuff + the usual fixes for amd/intel.
core:
- use drm_warn instead of warn
msm:
- Bindings:
- Added Shikra support
- Document a840, a704, a722
- Core:
- Use drm_client buffers for fbdev emulation
- teardown fixes
- ARM32 DMA fixup
- Remove objects from evict list when re-validated
- Bunch of corner case and error path fixes
- DPU:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Fixed SSPP offsets of Kaanapali
- DP:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Cleaned up core code in preparation for MST support
- Fixed prepare() to let Pipewire continue in case of the unplugged cable
- GPU:
- Add support for a704
- Add support for a722
- HDMI:
- Simplifed register access
amdgpu:
- eGPU fixes
- Runtime PM fix
- UserQ fixes
- Backlight fix
- Discovery sysfs fix
- Reset handling fixes
- Buffer func handling fix for xgmi
- VCN boundary check fix
- DC lut handling fixes
- MES fixes
- UVD fix
- VCE 3 fix
- Enforce isolation fix
- HPD fix for VGA/LVDS
- DML fix
- DCN 6 fixes
- DC gpu reset fix
amdkfd:
- Fix return value
- CU occupancy for GFX 11
- CU occupancy for GFX 12/12.1
- Queue bounds checking fix
- SVM fixes
- CRIU bounds checking fix
radeon:
- iMac display fix
xe:
- error message cleanups
- i2c global register definitions as dependency for xe/i2c fixes
- Media workardound
- Add CCS to gt_idle debugfs print
- Page fault related fix
- i2c related fixes
- System Controller mailbox bit fix"
* tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel: (121 commits)
drm/xe/sysctrl: Read mailbox phase bit from hardware
drm/xe/i2c: Keep the i2c controller always enabled
drm/xe/i2c: Fix the interrupt handling
i2c: designware: Global register definitions
drm/xe: Reject page faults from non-fault-mode scratch VMs
drm/xe/xe_gt_idle: Add CCS to the powergating info print
drm/xe: Do not apply WA 14025883347 to media 3503
drm/amd/display: fix dc_lock leak on GPU reset error paths
drm/amd/display: Fix redundant GPUVMEnable checks in dcn6 flip schedule
drm/amd/display: Fix wrong bytes-per-pixel value for dml2_422_packed_10
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
drm/amdgpu/userq: fix lock missing for userq fence error set
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
drm/amd/display: Log details when failing to register HPD IRQ
drm/amd/display: Fix HPD consideration for VGA/LVDS connectors on DCE
drm/amdgpu: clamp the isolation index for rings outside a partition
drm/amdkfd: Reject zero-sized AQL queue allocations after size halving
drm/amdgpu: Fix VCE 3 ring align_mask
drm/kfd: Add CU occupancy support to GFX12.1
...
|
|
amd-drm-next-7.3-2026-08-27:
amdgpu:
- MES fixes
- Userq fixes
- UVD fix
- VCE 3 fix
- Enforce isolation fix
- HPD fix for VGA/LVDS
- DML fix
- DCN 6 fixes
- DC gpu reset fix
amdkfd:
- CU occupancy for GFX 11
- CU occupancy for GFX 12/12.1
- Queue bounds checking fix
- SVM fixes
- CRIU bounds checking fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260827203610.3249084-1-alexander.deucher@amd.com
|
|
Pull more MM updates from Andrew Morton:
- "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
(Lorenzo Stoakes)
Index MAP_PRIVATE file-backed folios by their anonymous page offset
to resolve confusion around reverse mapping for zeroed and CoW'd
file-backed memory.
Use this new VMA anonymous page offset tracking to eliminate index
conflicts and lay the foundation for scalable CoW performance
improvements.
- "promote mapped executable folios after first usage for MGLRU"
(Baolin Wang)
Make MGLRU's protection of mapped executable file folios more
reliable. Follow the classical LRU's logic, promoting mapped
executable file folios after their first usage to give executable
code a better chance to stay in memory and improve workload
performance.
- "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
Chen)
Fix per-node proactive reclaim interface's ignoring the swappiness
parameter when CONFIG_MEMCG is disabled by consolidating
sc_swappiness() into a single function that checks
proactive_swappiness regardless of kernel configuration.
- "mm/vmscan: reduce lru_lock contention via vmstat-derived
scan-balance cost" (Usama Arif)
Reduce lru_lock contention in the reclaim path by deriving
scan-balance costs from vmstat counters rather than lock-acquired
producer updates.
Read and decay these cost signals on the reclaim side under a
dedicated per-lruvec lock, reducing total LRU lock wait time by over
60% without impacting scan throughput.
- "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)
Fix two low-risk zram bugs which Sashiko spotted in drive-by review.
- "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
memcg" (Zi Yan)
Fix xas_split_alloc() by enabling target folio memcg charging during
splits and adding the missing __GFP_ACCOUNT flag for proper XArray
node memory accounting.
- "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)
Replace hardcoded binary names in selftests/mm/.gitignore with a
generic pattern-matching rule to automatically ignore generated test
files and avoid manual updates when adding new tests.
- "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)
Make the incompatibility between FLATMEM and NUMA explicit in
mm/Kconfig and remove the unused pgdat_page_ext_init() function.
- "zram: fix zstd error paths and add parameter validation" (Haoqin
Huang)
Clean up zram compression backends by removing redundant error
cleanup, adding parameter and dictionary validation, auto-prefixing
algorithm error logs, and resetting parameters prior to
reinitialization.
- "zram: fix stale scan bounds after reinitialization" (Longlong Xia)
Prevent out-of-bounds slot accesses during concurrent zram resets by
moving table scan bound calculations under dev_lock in
writeback_store() and read_block_state().
- "add anon mTHP collapse test cases" (Baolin Wang)
Extend selftests helper functions to support arbitrary page orders
and add new test cases and options for mTHP collapse in khugepaged.
- "selftests/mm: Handle unsupported and transient test conditions"
(Muhammad Usama Anjum)
Update MM selftests to report a SKIP status instead of a failure when
required kernel or filesystem features are unsupported, while adding
retry logic for transient page migration errors.
- "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)
Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
and extend shrink_memcg() to support batch writeback for improved
writeback efficiency.
- "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
Baghdasaryan)
Introduce an IOCTL-based binary interface for memory allocation
profiling that enables kernel-side filtering before per-CPU counter
aggregation.
This eliminates the text-parsing overhead of /proc/allocinfo and
provides up to a 20x speedup by transferring only filtered allocation
data to userspace.
- "better block swap batching and a different take on swap_ops v5"
(Christoph Hellwig)
Refactor block swap I/O to use swap_iocb for batching instead of
single-bio requests and rebase the swap_ops interface, achieving
faster swap throughput during kernel builds.
- "mm: kmemleak: reduce transient false positives by confirming leaks"
(Catalin Marinas)
Reduce false-positive kmemleak reports by combining two kmemleak
enhancements that add a second confirmation scan and a configurable
minimum unreferenced scan count module parameter.
- "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
(Breno Leitao)
Auto-scanning kernels can generate false-positive memory leak reports
on single scans, so this patch defaults min_unref_scans to 2 when
CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
confirming scan.
- "swap_ops updates" (Christoph Hellwig)
Batching I/O for synchronous swap devices causes performance
regressions and filesystem-based swap suffers from double-indirection
overhead. This series resolves both issues by reintroducing per-folio
writes for synchronous swap and allowing filesystems to directly
export their own swap_ops.
- "mm/khugepaged: several cleanups" (Nico Pache)
khugepaged accumulated redundant state-checking patterns and outdated
comments following mTHP integration. Introduce dedicated helpers for
PTE validation and event counting while refreshing the internal
documentation.
- "maple_tree: lock checking and clean ups" (Liam Howlett)
Syzbot reports incorrectly blame memory management exit paths for
locking bugs, maple tree erase operations risk allocation failures
without gfp flags and internal documentation lacks clarity.
Improve lock error detection, update docs, fix race and allocation
edge cases and optimize erase allocations using a fallback to
GFP_KERNEL | GFP_NOFAIL.
* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
memcg: move LRU size accounting on reparenting instead of copying it
mm/vmscan: fix comment logic in balance_pgdat
maple_tree: add helper mas_make_walkable()
maple_tree: avoid extra gap calculation
maple_tree: fix argument name in header
maple_tree: change two GFP flags in tests
maple_tree: document erase and allocations better
maple_tree: avoid mas_erase() and mtree_erase() failures
maple_tree: document that erase may use GFP_KERNEL for allocations
maple_tree: catch race in mas_alloc_cyclic()
maple_tree: add bulk parent set helper
maple_tree: micro optimisation of mas_wr_store_type()
maple_tree: optimise mas_wr_node_store() when not in rcu mode
maple_tree: use prefetched value in mas_wr_store_type()
maple_tree: clarify comments on mas_nomem()
maple_tree: drop MAPLE_ALLOC_SLOTS
maple_tree: drop dead code from mas_extend_spanning_null()
maple_tree: documentation fix
maple_tree: add write lock checking with lockdep sequence numbers
...
|
|
The mailbox PHASE bit in SYSCTRL_MB_CTRL is toggled per-message and
was tracked in software as sc->phase_bit, reset to 0 on error paths.
If the cached value ever drifts from what the hardware last saw, all
following messages carry the wrong phase and get silently misread by
firmware.
Drop the cache and read PHASE directly from SYSCTRL_MB_CTRL before
each frame instead, removing xe_sysctrl_mailbox_init() and its call
sites along with it.
Fixes: 1f95f618182b ("drm/xe/xe_sysctrl: Add System Controller mailbox communication support")
Signed-off-by: Anoop Vijay <anoop.c.vijay@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260825172827.3801591-2-anoop.c.vijay@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 04984fcdbf6876c940c01026a7404c1e9cc91ba7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Some platforms make an assumption that the i2c controller's
enabled state indicates also the power state of the
controller. This can create a problem when the controller is
in disabled state, because the hardware may assume
incorrectly that it is then also in low-power state.
To fix this, the controller is kept enabled by taking over
the IC_ENABLE register. The controller has to be disabled
when the configuration is updated and when the target
address or the slave address are assigned, so disabling it
when IC_CON, IC_TAR or IC_SAR registers are programmed, and
then re-enabling it again.
Fixes: f0e53aadd702 ("drm/xe: Support for I2C attached MCUs")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260811121008.1493015-4-heikki.krogerus@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 76cc14e2faed1adae20f4ee144ead0e3a7566c49)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The platforms that support the interrupt from the I2C
adapter can not handle the amount of interrupts the adapter
generates because of the way the IRQ is routed in the
hardware. The I2C controller driver has to be kept in
polling mode because of that.
The AMC MCU can still generate critical alerts that have to
be handled. The interrupt from SMBus Alert is left enabled
and handled separately in the Xe. The alerts from the AMC
will cause the device to be declared wedged for now.
Fixes: f0e53aadd702 ("drm/xe: Support for I2C attached MCUs")
Cc: stable@vger.kernel.org
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Co-developed-by: Ramesh Babu B <ramesh.babu.b@intel.com>
Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260811121008.1493015-3-heikki.krogerus@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a55b76b8bc2c49b11d753c1c6d06ec3a2c61c85e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The default programming in the driver matches the "coverage" blend mode,
so add the corresponding pixel blend mode property to let userspace know
about it.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260826105421.1825331-1-thierry.reding@kernel.org
|
|
Having scratch enabled does not make a VM capable of handling recoverable
page faults. Allowing scratch VMs through the ASID lookup also admits
dma-fence mode VMs.
If such a VM faults on an already valid VMA, the handler reports success
without fixing the fault, causing the GPU to retry indefinitely.
Only allow fault-mode VMs through the ASID lookup. Fault-mode VMs using
scratch remain supported, while faults from 3D VMs are rejected.
Fixes: ad9843aac91a ("drm/xe/madvise: Implement purgeable buffer object support")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260820065445.567228-1-arvind.yadav@intel.com
(cherry picked from commit bfb24a06405b652d37831f3fb66b71d33a6605de)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
While reading the main GT powergating info from debugfs, include both
RCS and CCS engine masks.
Fixes: 0914c1e45d3a1 ("drm/xe/xe_gt_idle: add debugfs entry for powergating info")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260819073457.1812722-2-balasubramani.vivekanandan@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 8899e413c5ab85443ec9bbc50cffe924c6b596de)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The database was updated and the WA is no longer listed as applicable
to media 3503, so don't enable it there.
Fixes: c57db41b8d2c ("drm/xe/guc: Add Wa_14025883347 for GuC DMA failure on reset")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sk Anirban <sk.anirban@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260818213520.283063-1-daniele.ceraolospurio@intel.com
(cherry picked from commit fae59d5de5de39bc51ac2839f74970312e0c8905)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull another power sequencing update from Bartosz Golaszewski:
"A single tree-wide rename of two of the public functions to better
reflect their actual semantics:
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide"
* tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: rename pwrseq_power_on/off() to pwrseq_enable/disable()
|
|
Commit 1c6ceeee6ebb ("drm/atomic: Fix memleak on ERESTARTSYS during
non-blocking commits") fixed a very similar issue when the event was
allocated by drm_atomic_helper_setup_commit() itself.
However, if the event is allocated in prepare_signaling(), it will also be
set to NULL in complete_signaling(), which prevents drm_crtc_commit from
being put in __drm_atomic_helper_crtc_destroy_state().
Dropping the reference when the event is set to NULL at
complete_signaling() fixes the leak.
The leak can be reproduced by sending a signal to the thread using
DRM_MODE_PAGE_FLIP_EVENT and using a sw_sync fence to cause the atomic
ioctl to block at drm_atomic_helper_wait_for_fences(). It happened both
with amdgpu and vkms.
Fixes: 24835e442f28 ("drm: reference count event->completion")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260727-drm_crtc_atomic_commit_leak-v1-1-23d9948a9d7c@igalia.com
|
|
Since file_priv can never be NULL at prepare_signaling() as it is only
called by drm_mode_atomic_ioctl(), remove the check.
If that was not the case, skipping the rest of the block here would cause
the drm_pending_vblank_event object to leak and fail to set up the fence in
case out_fence_ptr is set.
Since the check is unreachable, there is no possible leak.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260817-drm_atomic_bogus_check-v2-1-2b9e60f32a7e@igalia.com
|
|
The way power sequencing works means that a call to pwrseq_power_on()
does not necessarily result in the pwrseq target being powered-on at
that time: it may have already been powered on before. Similarly: a call
to pwrseq_power_off() does not have to result in an actual powering off
of resources: there may still be other users that requested a power-on
before.
We will also introduce the concept of "non-controllable" pwrseq targets
soon which further increases the disconnect between the naming
convention and the actual semantics.
What consumers of pwrseq descriptors actually do is: they *vote* for a
powering on of a given target or retract that vote. These operations
could be called get/put in line with runtime PM but this could become
confusing since we already provide pwrseq_get/put() for a different
purpose. pwrseq_vote_on/off() also have been rejected as unusual in
the tree.
Change the name of the two functions to pwrseq_enable/disable() which
better reflects their purpose and semantics and also mirrors other
enable-counted resources like regulators and clocks. No functional change
intended.
If at any point users need to know *when* the exact power event happens,
we can provide that information in the form of a notifier.
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Alessio Belle <alessio.belle@imgtec.com> # imagination
Link: https://patch.msgid.link/20260731-pwrseq-vote-rename-v3-1-44e60b8be053@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to
VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory
causes a supervisor write page fault:
BUG: unable to handle page fault for address: ffffc9000389c000
...
RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110
...
Call Trace:
<TASK>
iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline]
drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442
cirrus_primary_plane_helper_atomic_update+0x98a/0xb00
drivers/gpu/drm/tiny/cirrus-qemu.c:358
drm_atomic_helper_commit_planes+0x626/0xea0
drivers/gpu/drm/drm_atomic_helper.c:3038
drm_atomic_helper_commit_tail+0x60/0x510
drivers/gpu/drm/drm_atomic_helper.c:1989
commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074
drm_atomic_helper_commit+0xa77/0xb10
drivers/gpu/drm/drm_atomic_helper.c:2312
Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource
is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less.
Fixes: ab3e023b1b4c ("drm/cirrus: rewrite and modernize driver.")
Assisted-by: Gemini:gemini-3.6-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+2442951a6abb004df963@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2442951a6abb004df963
Link: https://syzkaller.appspot.com/ai_job?id=ba262a3a-bccf-4ad8-a1b0-583c55d34fd6
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260825120729.493611-1-sst@poczta.fm
|
|
The is_avivo() function has a logic error where it compares a constant
to another constant instead of checking the device parameter:
(PCI_VENDOR_ID_ATI_R600 >= 0x9400)
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: f496834e1674 ("drm/ofdrm: Add per-model device function")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patch.msgid.link/20260731111729.703116-1-oushixiong1025@163.com
|
|
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c8a17756c425 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patch.msgid.link/20260825104134.669676-1-oushixiong1025@163.com
|
|
On GPU reset, dm_suspend() takes dc_lock and leaves it for dm_resume()
to drop. If amdgpu_dm_commit_zero_streams() or dm_dmub_hw_init() fails,
the function returns with the lock still held. The matching resume path
is then skipped, so every later dc_lock take hangs.
Release the cached DC state and unlock before returning the error.
Fixes: 3cf7a0bc87f0 ("drm/amd/display: Catch failures for amdgpu_dm_commit_zero_streams()")
Fixes: 2b6943df5413 ("drm/amd/display: Pass up errors for reset GPU that fails to init HW")
Cc: stable@vger.kernel.org
Signed-off-by: Linkai Gong <gonglinkai@kylinos.cn>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Inside dcn6_calculate_flip_schedule(), GPUVMEnable is already checked in
the outer if block. But the same GPUVMEnable is checked again in two
inner if blocks inside it. Since GPUVMEnable is always true at that
point, the inner else branches that assign meta_row_height are never
reached.
Remove the redundant inner GPUVMEnable checks and directly assign
dpte_row_height, which is always the correct value here.
Fixes: 7f7d7ea1fa51 ("drm/amd/display: Add new sources for DCN6")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The pixel format dml2_422_packed_10 needs BytePerPixelDETY set to
8.0/3. But it was accidentally placed in the wrong group that sets it to
4, so the correct value was never used.
This caused wrong DET buffer size and bandwidth calculations whenever
this format was used.
Fix it by moving dml2_422_packed_10 out of the wrong group so it gets
the correct value of 8.0/3.
Fixes: 7f7d7ea1fa51 ("drm/amd/display: Add new sources for DCN6")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Both create_queue_cpsch() and create_queue_nocpsch() unconditionally
call mqd_mgr->restore_mqd() when a CRIU restore is in progress
(qd != NULL), with no NULL guard. On any system where restore_mqd is
not implemented for the given queue type, a user holding
CAP_CHECKPOINT_RESTORE can trigger a kernel NULL pointer dereference
and panic the machine by issuing KFD_IOC_CRIU_OP_RESTORE with a
crafted queue restore object. Note that checkpoint_mqd is likewise
unimplemented on GFX12, so no legitimate CRIU image can reach this
path — only a hand-crafted restore payload.
Add a NULL guard for restore_mqd immediately after mqd_mgr is
resolved, unwinding via the existing error labels and returning
-EOPNOTSUPP if the callback is not implemented. This mirrors the
existing checkpoint_mqd guard in checkpoint_mqd().
Fixes: 48f0bdf4e38e ("drm/amdkfd: Added MQD manager files for GFX12.")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Marioukhine <Vladimir.Marioukhine@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_userq_fence_driver() and amdgpu_userq_fence_driver_destroy()
don't acquire the dma_fence spinlock, so locking the dma_fence lock
before test the signaled state and set error state to avoid missing
lock assert error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set +
MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no
dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart()
will return an uninitialized r. That can trigger out_free_vram_pages to drop
all VRAM just set up.
Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0.
Current code postponed the last page to the final copy. This patch flushes on
the last page when reach to the end of current drm_buddy_block; avoids another
svm_migrate_copy_memory_gart.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If page migration from device to sys ram fails for some reasons driver needs
release and unlock allocated system pages. To do that driver should use page
physical address, or pfn, then get struct page*. Current driver uses dma
address(for adev) that is not correct with IOMMU enabled, or even in general.
The patch releases and unlocks allocated system pages based on where migration
failed by struct page* of sys ram pages. Also dma_unmap correspodent system
ram pages at error path.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This should help diagnose HPD IRQ related issues in the future.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260821215059.312868-2-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After a refactor that landed in Linux 7.0,
DC now crashes when it is initialized on GPUs
that have a VGA or LVDS connector. This is because
these connectors have no HPD so the hpd_gpio is NULL
and therefore DC takes the code path meant for
DCN 4.2+ which sets irq_source_hpd = 255 that
causes the subsequent code to try to register
the HPD interrupt, which fails, and causes
a crash.
This commit should be backported to Linux 7.0 and newer.
Cc: stable@vger.kernel.org
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Roman Li <roman.li@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5490
Fixes: def3488eb0fd ("drm/amd/display: refactor HPD to increase flexibility")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260821215059.312868-1-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
adev->isolation[] has one slot per partition, but a ring that is not
assigned to one keeps AMDGPU_XCP_NO_PARTITION, which is ~0, so indexing
the array with it is out of bounds. SDMA submissions hit this on both
the isolation enforcement and the VM flush path and trip UBSAN.
Fall back to the first slot the way the cleaner shader path already
does, and stop taking the address before the ring type check that makes
it relevant.
Cc: stable@vger.kernel.org
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
KFD_IOC_ALLOC_MEMORY_OF_GPU with flag
KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM and size=1 triggers the AQL
wraparound workaround (size >>= 1), reducing size to 0. The resulting
zero passes through PAGE_ALIGN(0) = 0 without validation, bypassing the
per-process VRAM quota check in reserve_mem_limit()
(vram_used + 0 > vram_available is always false).
The fix adds post-halving zero-size validation in the primary
allocation path (amdgpu_amdkfd_gpuvm.c). The check happens after size
halving but before reserve_mem_limit(), and uses err_alignment_size
error path to properly clean up the allocated kgd_mem structure and
mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The largest frame is 20 dwords, so 0xf mask is too small.
This was always wrong, but we were lucky with the VCE_CMD_END
commands inserted after fence and vm_flush.
Fixes: 8897ea8c761b ("drm/amdgpu: Implement insert_end for VCE 3")
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Port changes from GFX9 to GFX12.1 mostly as-is.
Minor changes to register access code.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Faith Ekstrand
Lu Yao
Zhenhao Wan
Dave Airlie
Maxime Ripard
Arvind Yadav
Thomas Zimmermann
Deepanshu Kartikey
Ville Syrjälä
Nemesa Garg
Suraj Kandpal
Chaitanya Kumar Borah
Linus Torvalds
Anoop Vijay
Heikki Krogerus
Thierry Reding
Balasubramani Vivekanandan
Daniele Ceraolo Spurio
Thadeu Lima de Souza Cascardo
Bartosz Golaszewski
Slawomir Stepien
Shixiong Ou
Linkai Gong
Srinivasan Shanmugam
Vladimir Marioukhine
Prike Liang
Xiaogang Chen
Timur Kristóf
Xiang Liu
Sunday Clement
David Rosca
David Belanger