| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The remain_on_channel, mgmt_tx, and probe_peer ops previously used
a u64 *cookie output parameter. Now that cfg80211 pre-assigns the
cookie value before invoking drivers, the parameter conveys a value
from caller to driver, not the other way around. Convert it to a
plain u64 input parameter across the ops struct (cfg80211.h),
rdev-ops.h wrappers, nl80211.c/mlme.c call sites, mac80211, and
all driver implementations.
The tx_control_port op is excluded: its cookie pointer is nullable
(passed as NULL when dont_wait_for_ack is set), so the nullable
pointer semantics are still required.
Internal mac80211 helpers ieee80211_start_roc_work() and
ieee80211_attach_ack_skb() still take u64 *cookie because they
assign to the pointee; their callers now pass &cookie to take the
address of the local value parameter.
wil6210's internal wil_p2p_listen() is also updated to take u64
cookie since it is called directly from the remain_on_channel
callback.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-12-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Having a single place for cookie assignment and keeping that
responsibility in the cfg80211 subsystem is a logical choice as it
handles the userspace nl80211 API. add_nan_func already does this:
cfg80211 calls cfg80211_assign_cookie() before invoking the driver.
Apply the same pattern to remain_on_channel, mgmt_tx, probe_peer and
tx_control_port by pre-assigning the cookie in the nl80211 command
handlers before the rdev_* call. For tx_control_port the cookie is
only pre-assigned when the caller requests an ack (cookie pointer
non-NULL).
Drivers may still overwrite the value for now; subsequent patches will
remove per-driver cookie generation.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An SMMU implementing SMMU_IDR5.DS extends the range invalidation commands:
the SCALE field grows a 6th bit, raising its maximum value from 31 to 39,
and TTL == 0b01 becomes a valid level hint for a 16KB translation granule.
Add a new ARM_SMMU_FEAT_DS feature detecting the DS bit, and widen the
CMDQ_TLBI_0_SCALE field to its architectural 6 bits. Mask the scale value
explicitly in arm_smmu_cmdq_batch_add_range(), so the range invalidation
path emits the same commands as before, keeping the pre-existing 5-bit
truncation of a scale above 31.
Also list DS as a valid IDR5 field in the iommu_hw_info_arm_smmuv3 kdoc:
iommufd has always reported the raw IDR5 register, so a VMM may conclude
from that bit alone that it can expose DS to its guest.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Assisted-by: Claude:claude-fable-5
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add sdei_event_signal(), a thin wrapper over the SDEI_EVENT_SIGNAL call
(DEN0054) that makes the software-signalled event (event 0) pending on a
target PE -- delivered NMI-like even when that PE has interrupts masked.
It takes no locks, so it is safe to call from NMI / crash context.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
invoke_sdei_fn() returns -EIO when no SDEI conduit was probed, and the
core warns ("Failed to create event ...") on any registration that hits
that. An optional consumer that registers an event from an unconditional
initcall would therefore make every boot on a non-SDEI system emit that
warning for what is simply absent firmware.
Expose whether SDEI firmware is present so such a consumer can skip
registration -- and the warning -- when there is nothing to talk to.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch adds two static helpers in drivers/net/phy/phy-c45.c to
configure and read back master-slave roles for non BASE-T1 Clause 45
PHYs via the 10GBASE-T AN control/status registers.
These helpers are wired into genphy_c45_config_aneg() and
genphy_c45_read_status(). This changes the observable ethtool output
for drivers using the generic c45 read path.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20260728073106.1515-3-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a generic Clause 45 software reset helper. The helper sets the reset
bit in the PMA/PMD control register and waits until the bit is cleared by
hardware.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20260728073106.1515-2-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ata fixes from Damien Le Moal:
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen)
- Fix ahci_ceva driver initialization error path (Radhey)
- Fix libata header file to remove a kernel doc compilation warning
(Randy)
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt)
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me)
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas)
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas)
* tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: fix ata_scsi_lpm_supported() iteration
ata: libata-core: Disable LPM on WD Green 2.5 480GB
ata: libata-core: Disable LPM on some WD drives
scsi: libsas: terminate deferred commands on time out
ata: libata-scsi: schedule deferred atapi command
ata: libata-scsi: terminate deferred commands on time out
ata: libata-eh: Increase STANDBY IMMEDIATE timeout
ata: libata: avoid kernel-doc warnings
ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources()
ata: sata_mv: accept 1 or 2 resources in platform probe
|
|
KSZ8463 uses the KSZ9893 DSA TAG driver. However, the KSZ8463 doesn't
use the tail tag to convey timestamps to the host as KSZ9893 does. It
uses the reserved fields in the PTP header instead.
Add a KSZ8463-specific DSA_TAG driver to handle KSZ8463 timestamps.
There is no information in the tail tag to distinguish PTP packets from
others so use the ptp_classify_raw() helper to find the PTP packets and
extract the timestamp from their PTP headers.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260727-ksz-new-ptp-v3-8-caba39e680e3@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Richard Acayan <mailingradian@gmail.com> says:
This adds support for the SDM660 (formerly "SDM660 internal") sound card
and support for WCD codecs over internal MI2S (represented in APIs as
LPI MI2S).
Like on MSM8916 and MSM8953, some SDM660 and SDM670 devices connect to a
digital and analog codec. The connection to the digital codec is through
special "internal" MI2S ports. The digital and analog codecs are used on
the Xiaomi Redmi Note 7 for headset (playback + capture) and earpiece,
and also on the Google Pixel 3a for the headset.
This series does not include devicetree patches.
Link: https://patch.msgid.link/20260730174353.108023-1-mailingradian@gmail.com
|
|
There are 7 internal MI2S ports per direction found on devices with the
internal sound card for Snapdragon 660. This is similar to the LPI MI2S
ports, and the LPI MI2S bindings can be reused for internal MI2S. Extend
the bindings for LPI MI2S ports to accommodate the internal MI2S ports.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-3-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com> says:
This series adds support for LPASS low-power resource (LPR) voting
through PRM and introduces LPASS LPI TLMM pinctrl support for newer
platforms such as Hawi.
On such platforms, LPASS requires LPR resource voting via PRM to keep
the subsystem active. This is handled by adding a new clock ID and
support for PARAM_ID_RSC_CPU_LPR in q6prm.
Additionally, a new LPASS LPI TLMM block is introduced, requiring a
dedicated DT binding and pinctrl driver.
Link: https://patch.msgid.link/20260724141708.2212057-1-prasad.kumpatla@oss.qualcomm.com
|
|
Add a new clock ID, LPASS_HW_LPR_VOTE, to represent the LPASS low-power
resource (LPR) vote through the PRM interface.
The LPASS PRM supports a resource voting mechanism to control low-power
states via PARAM_ID_RSC_CPU_LPR. Exposing this as a q6prm clock ID allows
clients to request the LPR vote using the existing qcom,q6prm clock
provider interface.
This functionality is required on newer platforms (e.g. Hawi) where LPASS
clients need to explicitly manage LPR resource voting via PRM.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724141708.2212057-2-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If userspace tries to create a vCPU with the same vcpu_id as an existing
one, kvm_vm_ioctl_create_vcpu() checks for that and fails with -EEXIST
only after it already created the vCPU via kvm_arch_vcpu_create(). As a
result, even though this newly created vCPU is destroyed in the failure
path, the fact that it is temporarily created with an invalid vcpu_id
and that there are temporarily two vCPUs with the same vcpu_id is a
potential source of subtle issues.
In particular, this prevents fixing an VMX IPIv issue where a stale entry
left in the VM's PI descriptor table after the vCPU is destroyed in the
failure path. The right way to fix that issue is to clear that entry when
destroying the vCPU, however right now that would have a nasty side effect:
since the same entry is used for the other, previously created vCPU with
same vcpu_id, clearing it would mean effectively disabling IPIv for that
existing good vCPU.
So to avoid this and similar problems, check for duplicate vcpu_id as
early in the vCPU creation path as possible, before
kvm_arch_vcpu_create() and even before kvm_arch_vcpu_precreate().
Simply moving the existing kvm_get_vcpu_by_id() check earlier doesn't work,
as kvm->lock is dropped and reacquired, i.e. moving kvm_get_vcpu_by_id()
would introduce a race:
1. vCPU A is being created but not installed in kvm->vcpu_array yet.
2. vCPU B with the same vcpu_id is being created. It passes the
duplicated vcpu_id check, since the check doesn't find vCPU A in
kvm->vcpu_array.
3. vCPU A is installed in kvm->vcpu_array, vCPU creation succeeds.
4. vCPU B with the same vcpu_id is installed in kvm->vcpu_array, vCPU
creation succeeds.
So introduce the bitmap of vcpu_ids used by the VM, in order to safely
check if the given vcpu_id is used and mark is as used before releasing
kvm->lock first time.
Alternatively, KVM could use another Xarray[*] for roughly the same code
complexity, which would minimize KVM's steady state memory footprint at
the cost of higher runtime latency (to allocate and free entries). Given
that the worst case scenario is 256 bytes per-VM (on x86, which allows up
to 16KiB vCPU IDs), go with the slightly simpler approach until there's a
need to save memory.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/al6eg7C-2sDBEAFD@google.com [*]
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20260729170621.308809-2-dmaluka@chromium.org
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
- Wait on external BO kernel fences in exec IOCTL (Brost)
- General clean-up (Anas)
- Documentation fix (Rafael)
- Add a debugfs for pcode information (Karthik)
- Free madvise VMA array on L2 flush failure (Guangshuo)
- Page Table related fixes (Shuicheng, Zongyao)
- Improvements GuC error handling and GuC small fixes (Sk, Zhanjun, Arvind)
- Add new W/As (Daniele, Harish)
- GuC paging engine support (Auld)
- Add and use more KLV helpers (Michal)
- Balance exec queue suspend/resume (Niranjana, Thomas)
- Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC (Himal)
- SRIOV: Disable display in admin only PF mode (Satya)
- Fix writable override for CRI NVM (Sasha)
- Fix VF CCS attach/detach race with in-flight BO moves (Brost)
- Introduce Xe Uncorrectable Error Handling (Riana)
- Fix WOPCM size for LNL+ (Daniele)
- Consolidate debugfs fault injection functions (Mallesh)
- Multi-queue related fixes and improvements (Niranjana, Jagmeet, Shuicheng)
- Add RAS GPU health indicator (Soham)
- PAT related improvements (Roper, Sanjay)
- NULL deref fix on migration on VF (Satya)
- i2c related fix (Raag)
- Fix SVM leak and clean up xe_vm_create (Shuicheng)
- Drop force_probe requirement for NVL-s (Gustavo)
- Optimise TT population for DONTNEED BOs (Auld)
- Add page size allocation mode control and coverage (Himal, Nareshkumar)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/amt2kDVdyBK6VEyU@intel.com
|
|
Pull hyper-v fixes from Wei Liu:
- Multiple fixes for the MSHV driver (Stanislav Kinsburskii, Wei Liu,
Yi Xie, Yousef Alhouseen)
- Multiple fixes for the VMBus driver (Hardik Garg, Michael Kelley,
Sebastian Andrzej Siewior)
* tag 'hyperv-fixes-signed-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv_vtl: bounds-check cpu index in vtl mmap fault handler
mshv: Publish VP to pt_vp_array before installing the file descriptor
Drivers: hv: vmbus: add VTL2 redirect connection ID
mshv: Order pt_vp_array publish against irqfd assertion path
mshv: Fix missing error code on VP allocation failure
mshv: Fix level-triggered check on uninitialized data
mshv: Fix race in mshv_irqfd_deassign
mshv: Use kfree_rcu in mshv_portid_free
mshv: Fix sleeping under spinlock in mshv_portid_alloc
mshv: Fix duplicate GSI detection for GSI 0
Drivers: hv: vmbus: Remove vmbus_irq_initialized
Drivers: hv: vmbus: Replace lockdep_hardirq_threaded() with lockdep annotation
mshv_vtl: fix fd leak in mshv_ioctl_create_vtl()
mshv_vtl: clear hypercall output before copyout
Drivers: hv: vmbus: Set DMA coherent mask for VMBus devices
mshv: fix hv_input_get_system_property struct
|
|
utf8_normalize() was added in 2019 as part of
commit 9d53690f0d4e ("unicode: implement higher level API for string
handling")
but has remained unused.
(I think because the other higher level routines added by that patch
normalise as part of their operations)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
drm/i915 feature pull #2 for v7.3:
Features and functionality:
- Enable UHBR link rates on Thunderbolt tunneled links (Imre)
- Reduce Xe3+ PM demand peak bandwidth for power savings (Vinod)
- Add the blend mode property to all planes that support alpha blending (Chaitanya)
- Enable pipe DMC error interrupts for display 30+ (Dibin)
- Add KUnit tests for DP link config selection and fallback (Imre)
Refactoring and cleanups:
- Refactor DP link config selection and unify across use cases (Imre)
- Unify i915 and xe display runtime PM calls (Jani)
- Refactor BIOS framebuffer takeover (Ville)
Fixes:
- Fix HD audio on DP UHBR SST (Kai Vehmanen)
- Fixes to xe driver BIOS framebuffer takeover (Ville)
- Fix 2 pixels-per-clock CDCLK calculation to avoid underruns (Ville)
- Fix incorrectly set VSC SDP Main Stream Attribute (Chaitanya)
- Fix BPC and DSC selection for HDMI sinks (Alexander Kaplan)
- Fix PCON max FRL rate selection (Alexander Kaplan)
- Workaround Xe3P PSR2 screen corruption (Dibin)
- Fix NVL A & B stepping vtotal setting (Suraj)
- Fix xe DPT allocation paths (Maarten)
- Prefer system memory instead of stolen for new framebuffers in xe (Maarten)
- Fix transcoder mask sizes (John Harrison)
- Clear stale UV/Y plane DDB entries on plane disable (Vinod)
- Fix some DP AUX backlight control issues, again (Suraj)
- Fix switching between HDCP 1.4 and 2.2 authentication (Suraj)
- Remove unnecessary Xe2_LPD+ FBC plane width and surface size limits (Vinod)
- Ensure non-zero DSB safe window for PTL+ (Ankit)
- Fix bandwidth calculation to account for 16 DRAM channels (Uma)
- Fix NV12 ceiling division for bigjoiner case (Vidya)
DRM core changes:
- Add Thunderbolt UHBR tunneling support (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/cb1b5a644d75589cbcdcc8ec8160968140426439@intel.com
|
|
On ACE2+ platforms the link DMA stream allocator must avoid two
hardware errata in mlink-capable systems:
- Concurrent (cross-direction) hazard: when SoundWire shares a physical
link DMA stream index with HDaudio, iDisp or UAOL across the two
directions, the LLP and timestamp values for the affected stream are
wrong. SSP and DMIC are not affected because every DMA request from
those links carries one sample block.
- Sequential (playback only) hazard: once a HDaudio or iDisp link has
used a playback stream index, that index cannot drive any non
HDA/iDisp link in the same direction until the next controller
reset (CRST#).
Track the active link type per direction in two masks (one for SoundWire,
one for HDA/iDisp/UAOL) and the persistent set of playback stream
indices touched by HDA/iDisp in a third mask. The link DMA allocator
skips streams that would violate either rule. Streams are released from
the active masks when the stream is released; all masks are cleared in
hda_dsp_ctrl_init_chip() because the CRST# performed there clears the
hardware state as well.
A new helper hda_bus_ml_link_get_type() returns the link type from the
existing extended link descriptor so the SOF allocator can tell
SoundWire, HDA/iDisp and UAOL apart without duplicating the parsing.
The implementation is generic. On platforms older than ACE2 every link
is reported as HDA, only the sequential mask is ever set and it has no
effect because no other link types are present, so behavior is
unchanged.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730125130.29887-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The helper became unused after probe no longer drops all non-alt
links, so remove the dead API and implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730125130.29887-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to make "cc -E" output less annoying, this commit converts
cond_resched_tasks_rcu_qs() to static inline. You know, the READ_ONCE()
and WRITE_ONCE() macros used to be *so* simple. ;-)
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Some host bridge devices require resetting the Root Ports in a platform
specific way to recover them from error conditions such as Fatal AER
errors, Link Down, etc. Introduce pci_host_bridge::reset_root_port()
callback and call it from pcibios_reset_secondary_bus() if available. Also,
save the Root Port config space before reset and restore it afterwards.
The .reset_root_port() callback is responsible for resetting the given Root
Port referenced by the 'pci_dev' pointer in a platform-specific way and
bring it back to the working state if possible. If any error occurs during
the reset operation, relevant errno should be returned.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260729-pci-port-reset-v9-2-53570b92064d@oss.qualcomm.com
|
|
There should be a stub for sdca_fdl_free_state() for the case FDL
support isn't built into the kernel. Add the missing stub.
Fixes: 0880082c27b6 ("ASoC: SDCA: Remove devm from primary IRQ cleanup")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607291304.FE3mOcJF-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260730130602.3747053-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull sound fixes from Takashi Iwai:
"A collection of sound fixes for the 7.2-rc6 cycle. Again, it became
far larger than wished; I'll throttle from now on.
There are no major changes, just a normal flow of small fixes. The
majority of them are device-specific quirks and ASoC SDCA/codec
updates, but it includes a few ALSA core fixes as well.
ALSA Core:
- Fix for ALSA sequencer timer division-by-zero
- Fix potential race in ALSA timer core
- Wake up linked drain waiters on PCM stream unlink
- Fix double-free of converter objects on UMP rawmidi error path
USB-audio:
- Fix a few potential out-of-bounds access bugs
- Prevent stack info leak in RME Digiface status
- Fix UAF during UMP endpoint destruction
- Fix UAF at error handling during probe in Line6 6fire driver
- Quirks for C-Media CM6206, Corsair Virtuoso, Razer Barracuda X 2.4,
JKY Technology, and generic USB headphones
HD-audio:
- Quirks for HP Victus 16, HP Dragonfly Folio G3, Lenovo Legion 7, HP
Laptop 14s, Acer Nitro 5, TongFang X6SP45xU, Infinix INBOOK X3, and
HP Pavilion All-in-One
ASoC:
- Comprehensive cleanups and bug fixes for SoundWire/SDCA drivers
- DMI quirks for AMD ACP/YC on Lenovo Legion 7, Acer Aspire, MSI
Crosshair A16, and ASUS ExpertBook
- ACPI match table entry for SOF RT5682 on Intel Nova Lake
- Device-specific mixer / clock, irq fixes for TI TAS2562, TI
TAS2781, Sophgo cv1800b ADC, Maxim MAX98090/98095, FSL ASRC/EASRC
and Realtek RT5640"
* tag 'sound-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
ASoC: rt722: reset codec to fix abnormal sound
ASoC: dt-bindings: realtek,rt5640: Make interrupts optional
ALSA: hda/realtek: Add mute LED quirk for HP Victus 16-e0xxx (MB 88ED)
ALSA: usb-audio: Add GET_SAMPLE_RATE quirk for C-Media CM6206
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
ALSA: usb-audio: Add quirk for Corsair Virtuoso (later revision)
ALSA: pcm: wake linked drain waiters on unlink
ASoC: amd: acp: Add DMI quirk for Lenovo Legion 7 15ASH11
ASoC: sophgo: return 1 on volume change in cv1800b_adc_volume_set()
ASoC: tas2781: Use correct calibration data for SINEGAIN2 register
ASoC: SDCA: Move kcontrol search out of IRQ
ASoC: SDCA: Switch to fixup_controls callback for IRQ registration
ASoC: Add a component fixup_controls callback
ASoC: SDCA: Populate IRQ data earlier
ASoC: SDCA: Remove devm from primary IRQ cleanup
ASoC: SDCA: Add sdca_irq_cleanup_late()
ASoC: SDCA: Rename sdca_irq_allocate() to include devm
ALSA: hda/realtek: Add quirk for HP Dragonfly Folio G3 2-in-1 (103c:8a05)
ALSA:hda/realtek:ALC269 fixup for Legion 7 15ASH11 Mic Mute LED
...
|
|
Add PCI_VENDOR_ID_PICOHEART in pci_ids.h. Update the DWC PCIe
vendor table with Picoheart PCIe Vendor ID to enable the PCIe
PMU support.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Yicong Yang <yang.yicong@picoheart.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Joy Zou <joy.zou@oss.nxp.com> says:
The regulator_init_complete_work fires ~30s after boot to disable
unused regulators via I2C. When this work races with PM suspend, the
I2C adapter may already be suspended, causing a -ESHUTDOWN warning
dump.
This series addresses the race and adds proper suspend power
management for unused LDO regulators.
Link: https://patch.msgid.link/20260731-b4-regulator-pf01-v2-0-a406c8737fdb@oss.nxp.com
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize now
on the __ASSEMBLER__ macro that is provided by the compilers.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Set BIO_COMPLETE_IN_TASK on iomap writeback bios when a dropbehind folio
is added. This ensures that bi_end_io runs in task context, where
folio_end_dropbehind() can safely invalidate folios.
With the bio layer now handling task-context deferral generically,
IOMAP_IOEND_DONTCACHE is no longer needed, as XFS no longer needs to
route DONTCACHE ioends through its completion workqueue. Remove the flag
and its NOMERGE entry.
Without the NOMERGE, regular I/Os that get merged with a dropbehind
folio will also have their completion deferred to task context.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Link: https://patch.msgid.link/20260730-blk-dontcache-v7-3-3e8e6850068d@columbia.edu
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some bio completion handlers need to run from preemptible task context,
but bio_endio() may be called from IRQ context (e.g., buffer_head
writeback). Callers need a way to ensure their callback eventually runs
from a sleepable context. Add infrastructure for that, in two forms:
1. BIO_COMPLETE_IN_TASK, a bio flag the submitter sets when it knows
in advance that its callback needs task context (e.g., dropbehind
writeback). bio_endio() sees the flag and offloads completion to a
worker automatically.
2. bio_complete_in_task(), a helper that completion callbacks can
invoke from within bi_end_io() when the deferral decision is
dynamic (e.g., fserror reporting).
Both share a per-CPU list drained by a work item on a WQ_PERCPU
workqueue. Producers push the bio onto the local CPU's list and schedule
the work item, which then dispatches each bio's bi_end_io() from task
context.
Both methods are gated on bio_in_atomic(), which returns true in any
context where a sleeping bi_end_io() is unsafe, including
non-preemptible task context.
Two CPU hotplug callbacks are used to drain remaining bios from the
departing CPU's batch, while maintaining the per-CPU behavior. The
CPUHP_AP_ONLINE_DYN callback disables the per-CPU work item while the
CPU is still online, preventing it from running on an unbound worker
later. CPUHP_BP_PREPARE_DYN then drains any bios added between disabling
the work item and CPU offline.
Link: https://lore.kernel.org/all/20260409160243.1008358-1-hch@lst.de/
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260730-blk-dontcache-v7-2-3e8e6850068d@columbia.edu
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the atomic context detection logic from erofs's z_erofs_in_atomic()
into the block layer as bio_in_atomic(). This helper returns true when
the current context is unsafe for sleeping bio completion handlers (e.g.,
hard/soft IRQ, preempt-disabled).
The logic was originally added to erofs in commit c99fab6e80b7 ("erofs:
fix atomic context detection when !CONFIG_DEBUG_LOCK_ALLOC"). A
subsequent patch will use it in the block layer's bio completion
infrastructure, so move it to include/linux/bio.h where both subsystems
can share it.
Convert erofs to call the new bio_in_atomic() directly.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260730-blk-dontcache-v7-1-3e8e6850068d@columbia.edu
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
This series fixes some issues left to the first version
sof_ipc4_mod_init_ext_dp_memory_data payload building code. The
payload to specify memory requirements of Data Processing components,
running as independent processes in SOF firmware.
But more importantly it adds a payload of similar purpose to the
pipeline create message, e.g. sof_ipc4_glb_pipe_payload. It sums up
the memory requirements of individual Low Latency components in the
pipeline and sends the summed up values in pipeline create message.
Link: https://patch.msgid.link/20260730104141.14817-1-peter.ujfalusi@linux.intel.com
|
|
Fix a copy-paste error in struct sof_ipc4_mod_init_ext_dp_memory_data
datamember comments. And while at it, drop the overly specific notes
on the datamember values. The values are coming from topology and
and what to do with them is decided in SOF FW. Its a bad idea to try
to document their meaning in detail here. The Linux driver is only
passing the values.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds SOF_IPC4_GLB_PIPE_EXT_OBJ_ARRAY macros to set extension bit in
SOF_IPC4_GLB_CREATE_PIPELINE indicating presence of the payload, and
all necessary macros and structs to create the payload.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The was inconsistency with SOF_TKN_COMP_STACK_BYTES_REQUIREMENT and
SOF_TKN_COMP_HEAP_BYTES_REQUIREMENT token ids in the Linux driver code
with SOF FW topology code. This commit fixes the Linux side to match
tools/topology/topology2/include/common/tokens.conf
Link: https://github.com/thesofproject/sof/blob/main/tools/topology/topology2/include/common/tokens.conf#L30
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revert commit cfb5dc0f60fb ("thermal: hwmon: Use extra_groups for adding
temperature attributes") because it is depended on by another one that
turned out to be problematic.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1992232.tdWV9SEqCh@rafael.j.wysocki
|
|
Validate the functionality of LTL monitors by injecting events in a
controlled environment (KUnit) and expecting reactions, just like it is
done in DA monitors.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260723074534.43521-15-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Some monitors do not only rely on tracepoint arguments but also on the
currently executing task.
This makes it more challenging to mock events in KUnit.
Define wrapper functions around current, the functionality is mocked
only during KUnit, an additional function call is avoided using a static
branch unless any (even unrelated) KUnit test is running.
Rely on a global mock_current variable that is set only by the RV KUnit
tests and cleared on teardown. Unrelated KUnit tests that happen to
trigger RV handlers would see it null and use current.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Link: https://lore.kernel.org/r/20260723074534.43521-14-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Validate the functionality of DA monitors by injecting events in a
controlled environment (KUnit) and expecting reactions.
Events handlers are exported directly from the monitor source files
without using system events and with dummy arguments (e.g. no real
tasks). If the provided sequence of events incurs a violation, the test
expects the stub version of rv_react() to be called.
This testing method can validate the entire monitor implementation since
it sits between the monitor and the system (in place of the
tracepoints). All sorts of system and timing events can be emulated
without affecting the running kernel.
Handlers and monitor functions are exported as part of a struct to
simplify the process of running KUnit tests from kernel modules.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260723074534.43521-13-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
* pm-cpufreq:
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
cpufreq/amd-pstate: Cache the firmware programmed EPP value
cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems
cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization
cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active
cpufreq: schedutil: Replace sprintf() with sysfs_emit() in sysfs show
cpufreq: schedutil: Fix self-contradictory comment in sugov_iowait_apply()
Documentation: admin-guide: cpufreq: fix sampling_rate example command
cpufreq: intel_pstate: Move two functions closer to callers
cpufreq: intel_pstate: Consolidate frequency values computation
cpufreq: intel_pstate: Introduce intel_pstate_update_freq_limits()
cpufreq: intel_pstate: Fix setting minimum P-state at init time
cpufreq: intel_pstate: Rename INTEL_PSTATE_HWP_BROADWELL
cpufreq: intel_pstate: Simplify HWP handling on Broadwell
cpufreq: intel_pstate: Adjust the .adjust_perf() driver callback
cpufreq: intel_pstate: Rearrange checks in hybrid_get_cost()
|
|
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL.
Cc: stable@vger.kernel.org
Fixes: 5ff3f74e145a ("block: simplify direct io validity check")
Fixes: 7eac33186957 ("iomap: simplify direct io validity check")
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260720201057.1862857-6-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sashiko notes that playing games with the skb dst and rt
flags instead of providing hooknum is not a good idea
when validating the checksums.
Also, skipping checksum validation for FORWARD packets
risk silent data corruption, even if the only user is
the FTP-CMD packets coming from the real server.
Sashiko also noticed that by using common checksum
helper in the previous commit we actually fixed old bug
where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE
was not validated correctly.
Fixes: e876b75b9020 ("ipvs: fix the checksum validations")
Link: https://sashiko.dev/#/patchset/20260722211420.153933-1-pablo%40netfilter.org
Link: https://sashiko.dev/#/patchset/20260727185024.67534-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260728202520.59179-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260722101517.36313-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the initial ipset rhashtable conversion RFC series syzbot reported
following splat:
BUG: sleeping function [..] at kernel/irq_work.c:289
in_atomic(): 1, [..]
irq_work_sync.. kernel/irq_work.c:289
rhashtable_free_and_destroy.. lib/rhashtable.c:1295
hash_netport4_destroy.. net/netfilter/ipset/ip_set_hash_gen.h:420
ip_set_destroy_set_rcu.. net/netfilter/ipset/ip_set_core.c:1169
rcu_core.. kernel/rcu/tree.c:2897
This is because post-rhashtable-conversion hash implementation needs
to schedule in the destroy callback. At this time this isn't allowed.
Replace existing call_rcu() based destruction with rcu_work api.
Also allows to undo split of set destruction and gc work cancelling in
a future patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hash types do not acquire set->lock, they use 'region locking' where
only part of the hash table is locked. Parallel inserts and deletes are
possible and CPUs can race on ->ext_size update. Switch to atomic64_t.
This leaves another bug unresolved: there still can be a race on
comment extension re-init. This will be handled in a later commit
when converting to rhashtable backend.
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Users of include/linux/memcontrol.h don't need to see this internal
structure. Further changes to the struct will reduce recompiling.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Hao Li <hao.li@linux.dev>
Link: https://patch.msgid.link/20260727-b4-objext_split-v3-3-c29ef0f1f257@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Add dst_entry to tunnel device path, this will allow us to remove
a duplicated route lookup.
This is a preparation patch to retrieve the tunnel route directly
from the .fill_forward_path. This new dst_entry in the tunnel will be
used by a follow up patch.
Since dst_release() works fine on NULL interface, this is still
noop until the flowtable starts using this.
Add a new dev_fill_forward_path_release() function to drop the refcount
on the tunnel device route and use it in case of error out. Export it so
to drop the refcount on the tunnel route at a later stage.
Adjust existing drivers that recycle dev_fill_forward_path() to call
dev_fill_forward_path_release() for safety reasons.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Resetting the PCMSyCM registers is required for Intel SoundWire stream. The
same procedure is done in sdw_hda_dai_hw_params() for the normal
SoundWire stream, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20260730012518.2180906-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- document enums with the "enum" keyword
- add a description for @dbr_size
- add missing descriptions to struct most_interface (some just need
a ':' to be good)
- add missing descriptions to struct most_component
- use Returns: syntax for function return values
- convert most_deregister_interface() to kernel-doc notation and fix
its parameter name
Repairs these warnings:
Warning: include/linux/most.h:17 This comment starts with '/**',
but isn't a kernel-doc comment.
* Interface type
Warning: include/linux/most.h:32 This comment starts with '/**',
but isn't a kernel-doc comment.
* Channel direction.
Warning: include/linux/most.h:40 This comment starts with '/**',
but isn't a kernel-doc comment.
* Channel data type.
Warning: include/linux/most.h:131 struct member 'dbr_size' not
described in 'most_channel_config'
Warning: include/linux/most.h:191 This comment starts with '/**',
but isn't a kernel-doc comment.
* Interface instance description.
Warning: include/linux/most.h:274 struct member 'mod' not described
in 'most_component'
Warning: include/linux/most.h:274 struct member 'cfg_complete' not
described in 'most_component'
Warning: include/linux/most.h:288 This comment starts with '/**',
but isn't a kernel-doc comment.
* Deregisters instance of the interface.
Warning: include/linux/most.h:292 No description found for return value
of 'most_register_interface'
Warning: include/linux/most.h:298 function parameter 'iface' not
described in 'most_deregister_interface'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260719051123.2458641-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For any remote call to DSP, after sending an invocation message,
the fastRPC driver waits for a glink response, during which the CPU
can enter low power modes. This adds latency to the fastRPC call
due to CPU wakeup and scheduling overhead. Add polling mode support
where the fastRPC driver polls a shared memory location for
completion after sending the invocation, avoiding CPU wakeup and
scheduling latency and reducing fastRPC overhead. If the poll times
out, the call falls back to the normal interrupt/glink-based
completion path.
Poll mode is only applied to dynamic modules running in a user PD
(handle > FASTRPC_MAX_STATIC_HANDLE), since static/root-PD handles
are not expected to benefit from, or require, this optimization.
Support is advertised per SoC via fastrpc_soc_data, with a closed
exception list for older platforms whose DSP firmware is known to
support polling but which otherwise use the default soc_data.
Poll mode can be enabled by userspace via the FASTRPC_IOCTL_SET_OPTION
ioctl with the FASTRPC_POLL_MODE request id.
Since context IDs (ctxid) are allocated from a fixed-size, per-channel
cyclic IDR shared by all processes on a DSP, a context ID can be
recycled for a new request soon after it is freed. In poll mode the
context can be considered complete (and released) as soon as the poll
memory is updated, while the corresponding glink COMPLETE response
from the DSP may still be in flight. If that response arrives after
the ctxid has been reused, it would otherwise match the new context
and incorrectly signal completion for it while the DSP may still be
operating on the new context's buffers. To prevent this, embed a
monotonically increasing per-channel sequence number in the unused
upper bits of the ctxid/message context and validate it in the
rpmsg callback, dropping any response whose sequence number does not
match the current owner of that ctxid slot.
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094352.111065-8-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SoCFPGA firmware updates for v7.3
- Document stratix10-rsu for QSPI size and erase size
- Add method to retrieve device info table using RSU
- Add support for hardware monitoring using service driver
Resolves merge conflicts in:
drivers/firmware/stratix10-svc.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'svc_updates_for_v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
hwmon: add Altera SoC FPGA hardware monitoring driver
firmware: stratix10-svc: add async HWMON read commands and register socfpga-hwmon device
firmware: stratix10-rsu: Add synchronous fallback for async SVC operations
firmware: stratix10-rsu: Add flash device info retrieval via SMC
Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs
|
Arend van Spriel
Nicolin Chen
Kiryl Shutsemau (Meta)
Javen Xu
Linus Torvalds
Bastien Curutchet (Schneider Electric)
Mark Brown
Richard Acayan
Prasad Kumpatla
Dmytro Maluka
Dave Airlie
Dr. David Alan Gilbert
Peter Ujfalusi
Paul E. McKenney
Manivannan Sadhasivam
Charles Keepax
Yicong Yang
Thomas Huth
Tal Zussman
Jyri Sarha
Rafael J. Wysocki
Gabriele Monaco
Keith Busch
Julian Anastasov
Florian Westphal
Jozsef Kadlecsik
Vlastimil Babka (SUSE)
Pablo Neira Ayuso
Bard Liao
Randy Dunlap
Ekansh Gupta
Greg Kroah-Hartman