| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The ISSEI (Intel Silicon Security Engine Interface)
subsystem provides a communication channel between the host and the
Silicon Security Engine.
Prepare basic driver functions and character device
for user-space communication.
Add DMA access routines for ISSEI HECI devices.
Add of DMA-related structures and implementation of routines for
setting up DMA, as well as reading and writing DMA buffers.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260513-issei-for-upstream-v1-1-f590038678f9@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The at803x family of devices are subjected to an errata that requires
hard-reseting the PHY upon link change.
That can only work if there's a physical reset line wired to the PHY,
which the driver checks by looking if there's a reset GPIO configured
for the MDIO device.
The reset may however be controlled through a reset controller, which
isn't accounted for in the errata handling.
Besides that, PHY drivers aren't expected to directly access the
mdiodev's resources directly, let's therefore wrap this with a phylib
helper, that uses a similar mdio helper to check for reset existence.
This was found in preparation for bus-level resource management for
better mdio scan support.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260715101355.88536-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> says:
Currently only devicetree systems have their devices' probe ordered
against their suppliers automatically by fw_devlink. Software nodes have
lately been used extensively treewide to describe references to resource
suppliers: most notably, the GPIO subsystem uses it in many places. Now
that the conversion of "dangling" GPIO chip software nodes to using real
links is almost done, it makes sense to ensure no needless probe
deferrals by implementing the add_links() callback from the fwnode
interface.
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
Caveats: a supplier software node must be registered before the consumer
device is added, If the swnode is registered after the consumer was added,
add_links() has already run and set FWNODE_FLAG_LINKS_ADDED, so the late
supplier is missed. Graph/remote- endpoint ordering is left out for now as
well as there are no known users.
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-0-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
'struct dma_descriptor_metadata_ops' in not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
120635 21584 64 142283 22bcb drivers/dma/xilinx/xilinx_dma.o
After:
=====
text data bss dec hex filename
120699 21520 64 142283 22bcb drivers/dma/xilinx/xilinx_dma.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/b0a22171f3ed68e156a2fa84383e99c23ec6b2ff.1784037977.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Dinh writes:
firmware: stratix10-svc: fixes for v7.2
- Fix a memory leak by explicitly using kfree() to match the list-managed lifetime
- Fix FCS SMC call documentation
- Add proper handling of a no response from the SDM
- Fix teardown order of service driver
* tag 'svc_fixes_for_v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
|
|
As per 'Designware Cores PCI Express Controller Databook',
Section 7.1 - Overview, HDMA supports 64 Read and 64 Write
channels. Current controller driver supports up to 8 read and
write channels only. In order to utilize all the channels the
controller driver need to have the channel related structs
and variables as per the number of channels supported by IP.
Following changes are made to enable 64 Read / 64 Write
channel support:
o Defined HDMA specific macros to reflect the channel count.
o The count of ll_regions and dt_regions in dw_edma_chip and
dw_edma_pcie_data shall be in accordance to number of read
and write channels.
o In dw_edma_probe() configure the channels as per the channels
of the IP used.
o Changed mask types to u64 for higher channel counts.
Signed-off-by: Devendra K Verma <devendra.verma@amd.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260713064854.4065262-1-devverma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a per-port debugfs boolean "tx_timeout_skip_reset" that, when
enabled, makes mana_tx_timeout() log the TX timeout and return without
queueing the per-port detach/attach recovery work.
This is a debug-only aid for bringup and qualification: skipping the
recovery reset keeps the device and queue state intact so a TX timeout
can be correlated with hardware telemetry. The knob defaults to false,
so production recovery behaviour is unchanged.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260710132229.2851441-1-gargaditya@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add comment to clarify the physical media 10000baseCR follows.
10000baseCR does not correspond to any IEEE 802.3 *base-CR PMD.
It has no autonegotiation, no link training, and no mandatory FEC.
The industry standard for this media type is SFF-8431 Appendix-E
Direct Attach cable, also known as 10G_SFI_DA.
Link: https://lore.kernel.org/r/SN7PR11MB69003D33489DB1D6B17EF72A9AF52@SN7PR11MB6900.namprd11.prod.outlook.com
Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260703100537.1109838-1-siddaraju.dh@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to convert the legacy gpio-keys platform device on BCM47XX
boards to use software nodes. To do this properly and allow
referencing the GPIO controller by address rather than relying on
name-based matching (which is being removed from the gpiolib core),
we need to associate the GPIO controller with a software node.
Introduce ssb_gpio_swnode, register it, and associate it with the
gpio_chip.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We want to convert the legacy gpio-keys platform device on BCM47XX
boards to use software nodes. To do this properly and allow
referencing the GPIO controller by address rather than relying on
name-based matching (which is being removed from the gpiolib core),
we need to associate the GPIO controller with a software node.
Introduce bcma_gpio_swnode, register it if the device does not
already have a firmware node, and associate it with the gpio_chip.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add support for responding to Get_Battery_Cap (extended) request with a
a Battery_Capabilities (extended) msg. The requester will request
Battery Cap for a specific battery using an index in Get_Battery_Cap. In
case of failure to identify battery, TCPM shall reply with an
appropriate message indicating so.
As the Battery Cap Data Block size is 9 Bytes (lesser than
MaxExtendedMsgChunkLen of 26B), only a single chunk is required to
complete the AMS.
Support for Battery_Capabilities message is required for sinks that
contain battery as specified in USB PD Rev3.1 v1.8
("Applicability of Data Messages" section).
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260714-batt-caps-upstream-v1-1-c86f0a7fbbda@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for responding to a Get_Battery_Status request with a
Battery_Status message. The port partner shall request the status of a
port's battery by providing an index in the Get_Battery_Status AMS. In
case of failure to identify the battery, the port shall reply with an
appropriate message indicating so.
Support for Battery_Status message is required for sinks that contain
battery as specified in USB PD Rev3.1 v1.8
("Applicability of Data Messages" section).
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260714-batt-status-v5-2-9de4aa900b69@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add power_supply_get_system_batteries() to allow drivers to obtain
a list of registered battery type power supply references in the
system. Also add power_supply_put_system_batteries() to perform
cleanup after the former function is called.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-batt-status-v5-1-9de4aa900b69@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The auth_hmacs array in struct sctp_cookie is supposed to store a complete
SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr
followed by N HMAC identifiers.
However, the array size was calculated using an extra 2 bytes instead of
sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers
are configured, the HMAC-ALGO parameter stored in the endpoint is larger
than the auth_hmacs buffer in the cookie.
As a result, sctp_association_init() copies beyond the end of auth_hmacs
when initializing the association, corrupting the adjacent auth_chunks
field. This can lead to an invalid HMAC identifier being accepted and later
cause an out-of-bounds read in sctp_auth_get_hmac().
Fix the array size calculation by including the full SCTP parameter header
size.
Fixes: 1f485649f529 ("[SCTP]: Implement SCTP-AUTH internals")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Reported-by: Zihan Xi <xizh2024@lzu.edu.cn>
Reported-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/634a0de0d5de29532915e6d47c92a0cbc206e03f.1783707155.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These two fields back the fallback skb pool that find_skb() uses.
Every helper that touches them lives in netconsole now (refill_skbs,
refill_skbs_work_handler, netconsole_skb_pool_init,
netconsole_skb_pool_flush, find_skb, netcons_skb_pop), so the data
can move alongside its only consumer.
Add skb_pool and refill_wq to struct netconsole_target, drop them
from struct netpoll.
This will save 48-bytes for every netpoll user instance (except
netconsole that will have it in netconsole target struct).
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-7-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The destination ethernet address is netconsole configuration: no other
netpoll user (bonding, team, vlan, bridge, macvlan, dsa) references
np->remote_mac, only netconsole's ethernet framing and its
configfs/cmdline interface do.
Move it into struct netconsole_target and convert push_eth() to take the
netconsole_target; netconsole_print_banner() and
netconsole_parser_cmdline() already take it. The configfs show/store
handlers and alloc_and_init() reach the field directly.
No functional change; the remote_mac sysfs attribute is unchanged.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-9-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_pool_flush() has no callers left in net/core/netpoll.c after
netconsole took over the pool lifecycle. Inline its body into
netconsole_skb_pool_flush() (the only caller) and drop the function
and its export from netpoll. The prototype goes from
<linux/netpoll.h>.
Pure code motion: cancel_work_sync() + skb_queue_purge_reason()
semantics are unchanged.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-6-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The source and destination UDP ports live in struct netpoll but are
netconsole configuration. No other netpoll user (bonding, team, vlan,
bridge, macvlan, dsa) touches np->local_port or np->remote_port; they
only use the netpoll TX/forwarding path. Only netconsole's UDP framing
and its configfs/cmdline interface read these fields.
Move both into struct netconsole_target and convert the three helpers
that read them - push_udp(), netconsole_print_banner() and
netconsole_parser_cmdline() - to take the netconsole_target. The
configfs show/store handlers already have the target in hand.
No functional change; the local_port / remote_port sysfs attributes are
unchanged.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-8-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
refill_skbs() is now only called from netconsole (directly via
netconsole_skb_pool_init() and indirectly via the just-moved
refill_skbs_work_handler()), and the MAX_UDP_CHUNK / MAX_SKBS /
MAX_SKB_SIZE macros are private to it. Move them all into
drivers/net/netconsole.c.
MAX_UDP_CHUNK and MAX_SKB_SIZE were promoted to <linux/netpoll.h>
by commit 6c537b845c99 ("netconsole: do not dequeue pooled skbs that
cannot satisfy len") so find_skb() could detect oversized requests
against the same value refill_skbs() used. With both functions now
local to netconsole, the shared definition no longer needs to live
in the header.
Pure code motion: bodies and pool sizing semantics are unchanged.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-5-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The work handler is wired via INIT_WORK() in
netconsole_skb_pool_init() and has no other callers since the
previous patch took the skb pool lifecycle out of __netpoll_setup().
Move the function body into drivers/net/netconsole.c as a
file-static helper, drop EXPORT_SYMBOL_GPL() and remove the
prototype from <linux/netpoll.h>.
Pure code motion: the body is unchanged and still calls the
exported refill_skbs() in net/core/netpoll.c.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-4-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These three helpers manage the per-netpoll fallback skb pool. They
are file-static today because all of their callers live in
net/core/netpoll.c. Subsequent patches relocate the pool's owner
from struct netpoll to the only consumer that actually uses it
(netconsole), and that work needs netconsole to drive the helpers
directly while the function bodies still live here.
Drop static, add prototypes in <linux/netpoll.h>, and
EXPORT_SYMBOL_GPL() each. No behaviour change.
The exports are transitional. Each helper is moved into
drivers/net/netconsole.c later in this series, and at that point
its EXPORT_SYMBOL_GPL() and prototype are dropped. By the end of
the series no symbol introduced here remains exported.
The goal of this patch is to make the subsequente patches easy to
review.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-netconsole_move_more-v3-2-6f63f76b28bc@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-16
this is a pull request of 19 patches for net/main.
The first patch is by Alexander Hölzl and fixes the Kconfig
description of the vxcan driver.
Next patch by Fan Wu fixes the tear down order in the esd_usb driver.
Followed by a patch by Oliver Hartkopp that adds missing locking for
the raw flags in the CAN_RAW protocol.
Shuhao Fu's patch for the j1939 protocol fix lockless
local-destination check.
Stéphane Grosjean updates their email address.
The next 11 patches all target the CAM Broadcast Manager protocol. One
contributed by Lee Jones the remaining ones by Oliver Hartkopp. They
fix several concurrency and locking issues found by various bots.
The last 3 patches are also by Oliver Hartkopp fixing concurrency and
locking issues found by various bots in the CAN ISO Transport
Protocol.
linux-can-fixes-for-7.2-20260716
* tag 'linux-can-fixes-for-7.2-20260716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: serialize TX state transitions under so->rx_lock
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
can: isotp: use unconditional synchronize_rcu() in isotp_release()
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
can: bcm: fix stale rx/tx ops after device removal
can: bcm: add missing device refcount for CAN filter removal
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
can: bcm: extend bcm_tx_lock usage for data and timer updates
can: bcm: add missing rcu list annotations and operations
can: bcm: fix CAN frame rx/tx statistics
can: bcm: add locking when updating filter and timer values
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF
can: peak: Modification of references to email accounts being deleted
can: j1939: fix lockless local-destination check
can: raw: add locking for raw flags bitfield
can: esd_usb: kill anchored URBs before freeing netdevs
can: vxcan: Kconfig: fix description stating no local echo provided
====================
Link: https://patch.msgid.link/20260716155528.809908-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a "strict" argument to acpi_processor_extract_lpi_info() that, when
set, will cause it to ignore _LPI states without minimum residency or
wake latency instead of assuming 10 us values for these parameters.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Acked-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/3896986.MHq7AAxBmi@rafael.j.wysocki
|
|
In preparation for adding ACPI _LPI support to the intel_idle driver,
move acpi_processor_extract_lpi_info() along with some static functions
used by it to the acpi_processor.c file containing the non-modular part
of the ACPI processor driver, so it can be called by external non-modular
code like intel_idle.
However, export it to modules in the ACPI_PROCESSOR_IDLE import
namespace so that the modular part of the ACPI processor driver
can still invoke it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Acked-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/2277662.Mh6RI2rZIc@rafael.j.wysocki
|
|
Add a new debugfs entry that makes it possible to do
error injection of failing the next N transmits by a
timeout.
This can be used to test what happens in that case during
the claiming of a free logical address.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If claiming a logical address fails, then set the
CEC_LOG_ADDRS_FL_CONFIG_FAILED flag. This makes it possible for
userspace to detect this corner case.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently there is a distinction between core events
(CEC_EVENT_STATE_CHANGE and CEC_EVENT_LOST_MSGS) and other
events. The core events do not require memory allocations,
so are a bit faster, but they are also limited to just a
single event: if a new event comes in, then that replaces
the old one.
It's all overly complicated, and with only one state change
event it is easy to miss state changes.
So just drop that optimization, and allow for up to 3
state change events.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Make the base registration function for fixed-factor clocks public and
re-implement the various registration functions that are a direct call
to __clk_hw_register_fixed_factor() as macros.
This is similar to how the registration functions of divider, mux and
other clocks are implemented.
Add a new macro clk_hw_register_fixed_factor_pdata() to register
a fixed-factor clock with its parent clock passed as a struct
clk_parent_data.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
|
|
The Other Logic Blocks (OLB) found in Mobileye SoCs contain hardware
sub-functions grouped in a logical device.
The EyeQ7H features 14 such OLB. The main differences with the previous
generation of SoC are that some blocks have two clock sources instead
of one and that the clock source can be the one of the clock output of
another OLB instead of the main oscillator.
For the blocks with a single parent clock, the name of that clock is
"ref", similar to what is done for the OLB of the previous SoC. The
blocks with two parent clocks use either "ref" for the main oscillator,
"ref_100p0" for a 100MHz reference clock or "ref_106p6" for 106.6MHz
reference clock.
Some OLB also contain a reset controller with one or more reset domain,
like the blocks found in the EyeQ6H.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
|
|
Use bool for the CBC encryption/decryption flag passed through
p8_aes_cbc_crypt() to aes_p8_cbc_encrypt().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SWIOTLB bounce buffer pool size is hardcoded at 64 MB via
IO_TLB_DEFAULT_SIZE with no compile-time knob to adjust it. On
memory-constrained embedded or mobile platforms equipped with a
hardware IOMMU (e.g., ARM SMMU) covering most DMA-capable devices,
reserving 64 MB at boot is unnecessarily wasteful — the SWIOTLB is
only exercised for devices that bypass the IOMMU or have restricted
DMA address ranges.
Introduce CONFIG_SWIOTLB_DEFAULT_SIZE_MB, an integer Kconfig option
(range 1–64 MB, default 64) that allows platforms to set a smaller
compile-time default. IO_TLB_DEFAULT_SIZE is updated to derive from
this value when CONFIG_SWIOTLB is enabled, preserving the existing
64 MB default when the option is not configured.
The runtime "swiotlb=<nslabs>" kernel parameter override remains
fully supported and takes precedence over the compile-time default.
Signed-off-by: Jagadeesh Pagadala <jpagadal@qti.qualcomm.com>
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20260702-swiotlb-v2-1-9205f3ba5408@oss.qualcomm.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Technically it is fine (on all current Linux architectures) to store a
pointer in an unsigned long variable. However this needs explicit casting
which is an easy source for type mismatches.
By replacing the plain unsigned long .driver_data in struct zorro_device_id
by an anonymous union, most of the casting can be dropped. There is still
some implicit casting involved (between a void * and a driver specific
pointer type), but that's better than the approach to store a pointer in an
unsigned long variable as this doesn't lose the information that the data
being pointed to is const.
All users of struct zorro_device_id are initialized in a way that is
compatible with the new definition, so no adaptions are needed there.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Max Staudt <max@enpas.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patch.msgid.link/49576a7501128c93ef318566ed7faefce163f1fd.1779803053.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ed.tsai@mediatek.com says:
The first patch adds the get_hba_nortt() callback to the UFS core
layer, allowing vendor drivers to provide dynamic, platform-specific
RTT capability handling.
The second patch implements this callback in the MediaTek UFS driver,
distinguishing between legacy platforms (which require the RTT to be
limited to 2) and newer MT6995 B0+ platforms (which can use the value
from the capability register directly).
The third patch removes the max_num_rtt field from ufs_hba_variant_ops
as it is now replaced by the get_hba_nortt() callback.
Link: https://patch.msgid.link/20260615055802.105479-1-ed.tsai@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
drm-misc-next for 7.3:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- blend: allow blend mode property without PREMULTI
- bridges:
- Rename drm_for_each_bridge_in_chain_scoped to
drm_for_each_bridge_in_chain
- Drop legacy bridges support
- gpusvm: Code reorganization to give drivers more flexibility
Driver Changes:
- etnaviv: Check if a reset has been successful
- nouveau: Create instmem iomapping at first use
- panthor: Remove redundant cleanup
- qxl: Convert to a simple encoder to a regular one
- bridges:
- Convert all remaining legacy bridges to atomic
- tc358767: clamp the reported AUX read size to the request
- panels:
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260716-famous-pastel-ostrich-a1aaef@houat
|
|
A kfunc marked with KF_IMPLICIT_ARGS flag takes implicit arguments
(such as bpf_prog_aux) that the verifier injects at load time.
resolve_btfids strips those from the kfunc's BTF-visible prototype and
keeps the real kernel ABI in a counterpart _impl prototype [1].
fentry/fexit/fmod_ret/fsession programs may attach to the BPF kernel
functions, including those with implicit args. However
bpf_check_attach_target() and bpf_check_attach_btf_id_multi() extract
the struct btf_func_model from the wrong BTF prototype of the
kfunc. The btf_func_model is later read to construct the trampoline,
which then causes the injected implicit argument to be clobbered and
the kfunc dereferencing garbage.
Add btf_attach_func_proto() to resolve the real ABI prototype of the
kfunc the way the call site does: by looking up the _impl prototype
for a KF_IMPLICIT_ARGS kfunc. Use it at both attach-target model
construction sites.
To enable this, make two supporting changes:
* pass bpf_verifier_log instead of bpf_verifier_env to
find_kfunc_impl_proto(), so it can be reused from the attach path
* add btf_kfunc_check_flag() to test a flag across all of a kfunc's
hook sets, because a program attaching to a kfunc is not in the
kfunc's call-set
KF_IMPLICIT_ARGS must be consistent across the sets, so
btf_kfunc_check_flag() returns -EINVAL on inconsistency.
btf_kfunc_check_flag() reads the kfunc's flags from the target's
kfunc_set_tab. For a module BTF that table is stable only after the
module is live, so take a module reference around the read, mirroring
how the kfunc call path gates the same lookup with btf_try_get_module().
The remaining call sites of btf_distill_func_proto() are safe as
is. The BPF_TRACE_ITER case distills a registered iterator's
prototype, and bpf_struct_ops_desc_init() distills the
function-pointer members of a struct_ops type. Neither is a kfunc, and
so can't have implicit arguments.
[1] https://lore.kernel.org/all/20260120222638.3976562-1-ihor.solodrai@linux.dev/
Fixes: 64e1360524b9 ("bpf: Verifier support for KF_IMPLICIT_ARGS")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://github.com/sched-ext/scx/issues/3687#issuecomment-4906694106
Link: https://patch.msgid.link/20260713235223.1639022-2-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Pull pmdomain fixes from Ulf Hansson:
"imx:
- Assign child domains for imx93 to prevent power off when in use
- Fix i.MX8MP power up sequences
mediatek:
- Fix possible nullptr in HWV cleanup/on-check"
* tag 'pmdomain-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check
pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
pmdomain: imx: Fix i.MX8MP power notifier
pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
dt-bindings: power: imx93: Add MIPI PHY power domain
|
|
This adds:
- misc_parameters_6, containing a few fields for matching PSP headers.
As this is the last misc_parameters field defined, retire the old
optimization added in commit [1] to not touch the reserved part.
- PSP decap action.
- PSP SPI header field pointer.
[1] commit 667cb65ae5ad ("net/mlx5: Don't store reserved part in FTEs
and FGs")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260713084320.1015240-3-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
esw_manager_vport_number{,_valid} and merged_eswitch were read through a
separate mlx5_ifc_esw_cap_bits struct, but these bits live in the
e-switch capability that mlx5_ifc_e_switch_cap_bits already describes
(both overlay the same QUERY_HCA_CAP op_mod 0x9 output).
Add esw_manager_vport_number{,_valid} to mlx5_ifc_e_switch_cap_bits at
the same offsets, drop the redundant mlx5_ifc_esw_cap_bits and its
hca_cap_union member, and switch the only user (hws/cmd.c) to
capability.e_switch_cap.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260713084320.1015240-2-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
smp_call_function_many_cond() uses the per-CPU cfd->cpumask as the list
of remote CPUs to wait for. That is safe while the caller remains pinned
to the current CPU for the whole operation, because another task cannot
run on the same CPU and reuse the per-CPU mask.
The synchronous wait is the long-latency part of the operation. To make
that wait preemptible, the mask iterated by csd_lock_wait() must remain
stable even if the task is preempted or migrates. If the wait used the
per-CPU cfd->cpumask after dropping CPU pinning, another task scheduled
on the original CPU could enter smp_call_function_many_cond() and
overwrite the mask while the first task is still iterating it.
Give each task private IPI cpumask storage and use it as the wait mask in
smp_call_function_many_cond(). Other cpumask storage choices do not fit
this use case:
- Per-CPU storage is the state that becomes unsafe once the wait is
made preemptible. After the caller drops CPU pinning, another task
scheduled on the original CPU can enter smp_call_function_many_cond()
and reuse the same per-CPU mask.
- Stack storage is not suitable for large NR_CPUS or
CONFIG_CPUMASK_OFFSTACK=y configurations. The wait mask needs to
scale with cpumask_size(), and putting that storage on the stack is
not acceptable on large systems.
- Allocating the mask inside smp_call_function_many_cond() would put an
allocation and a failure path in the generic IPI path. A sleeping
allocation is not suitable because callers have historically only
provided a preempt-disabled context, not a sleepable one. GFP_ATOMIC
would avoid sleeping, but a failure fallback would make the latency
improvement opportunistic instead of guaranteed.
The users are not limited to a small, pre-identifiable class of tasks. On
x86, ordinary tasks can reach this path through TLB flushes during exit,
unmap and reclaim, so allocating the mask only for a known subset of
tasks is not straightforward.
The memory cost is explicit: one word is added to task_struct. When
cpumask_size() fits in that word, the mask is stored inline and no
separate allocation is needed. Larger systems allocate cpumask_size() per
task; on x86-64 NR_CPUS=8192 this is 1 KiB per task. For context,
x86 already carries several KiB of per-task architecture and FPU state,
depending on the enabled features and configuration. That does not make
the extra cpumask free, but it puts the large-NR_CPUS case in
perspective.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260709122933.4021501-5-zhouchuyi@bytedance.com
|
|
smp_call_function_any() disables preemption across the entire operation:
selecting a target CPU, enqueueing the IPI, and synchronously waiting for
the remote CPU. smp_call_function_single() already re-enables preemption
before the synchronous csd_lock_wait(), so callers of
smp_call_function_any() should benefit from the same shorter
preemption-disabled section.
Simply removing get_cpu() and put_cpu() from smp_call_function_any()
would leave the preemption disablement entirely to
smp_call_function_single(). That opens a preemption window between
selecting the remote CPU, for example via sched_numa_find_nth_cpu(), and
dispatching the IPI in smp_call_function_single(). If the selected CPU is
fully offlined in that window, smp_call_function_single() fails its
cpu_online() check and returns -ENXIO to the caller, violating the
guarantee that smp_call_function_any() executes on any online CPU in the
mask.
Move the remote CPU selection into a common
__smp_call_function_single() helper. Keep the target CPU selection and
IPI dispatch within the same preemption-disabled region, while still
allowing the wait path to use the shorter preemption-disabled section
provided by smp_call_function_single().
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260709122933.4021501-4-zhouchuyi@bytedance.com
|
|
Following the sale of PEAK-System France by HMS-Networks, this update is
intended to change all my @hms-networks.com email addresses to my new
@peak-system.fr address.
Signed-off-by: Stéphane Grosjean <s.grosjean@peak-system.fr>
Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is needed by rust/helpers/srcu.c which now adds
rust_helper_srcu_readers_active() as a wrapper around the SRCU helper
for Rust callers.
To achive this:
1- Move the srcu_readers_active() implementation from
"kernel/rcu/srcutree.c" to "include/linux/srcutree.h".
2- Implement a matching srcu_readers_active() in
"include/linux/srcutiny.h" and use it on the existing open-coded
WARN_ON() check in cleanup_srcu_struct().
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Restructure the SRCU initialization functions so it always follows
one direction:
init_srcu_struct() -> __init_srcu_struct() -> lockdep or generic
This uses the same wrapper style as mutex. It avoids the old confusing
style where init_srcu_struct() and __init_srcu_struct() called each
other in different configs. It also helps Rust side to have simpler
helper for SRCU initialization.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Merge Glymur clock controller binding from topic branch to get access to
constants.
|
|
Merge Shikra RPM and global clock controller bindings from topic branch
to get access to the various constants.
|
|
For rproc that doing attach, rproc_start_subdevices() is called only when
attach successfully. If rproc_report_crash() is called in the attach
function, rproc_boot_recovery()->rproc_stop()->rproc_stop_subdevices()->
glink_subdev_stop() could be called and cause NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000300
Mem abort info:
...
pc : qcom_glink_smem_unregister+0x14/0x48 [qcom_glink_smem]
lr : glink_subdev_stop+0x1c/0x30 [qcom_common]
...
Call trace:
qcom_glink_smem_unregister+0x14/0x48 [qcom_glink_smem] (P)
glink_subdev_stop+0x1c/0x30 [qcom_common]
rproc_stop+0x58/0x17c
rproc_trigger_recovery+0xb0/0x150
rproc_crash_handler_work+0xa4/0xc4
process_scheduled_works+0x18c/0x2d8
worker_thread+0x144/0x280
kthread+0x124/0x138
ret_from_fork+0x10/0x20
Code: a9be7bfd 910003fd a90153f3 aa0003f3 (b9430000)
---[ end trace 0000000000000000 ]---
Introduce "subdevs_started" flag to indicate rproc_start_subdevices() has
been called successfully. Ensure subdevices are only stopped if they have
been started.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-rproc-attach-issue-v3-2-8e24310707ce@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unlike the remoteproc firmware load path where rproc_add() call
rproc_auto_boot_callback() asynchronously and ignores the return value of
rproc_boot(), the attach path calls rproc_boot() synchronously and
propagates its return value back to rproc_add(). This means a failure
during rproc_attach() causes rproc_add() to fail and triggers resource
release, removing the remoteproc from sysfs and making it unavailable for
recovery or further boot attempts.
Align the remoteproc attach path with the firmware load path by
introducing attach_work and scheduling rproc_boot() asynchronously via
schedule_work(). This keeps the remoteproc registered and available in
sysfs even if the initial attach attempt fails, and avoids blocking
rproc_add() on the attach result.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-rproc-attach-issue-v3-1-8e24310707ce@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Newer VMD with device ID 0x28C1 has unique settings compared to its
predecessor where BIOS enumerates the entire VMD device tree and assigns
respective configurations.
VMD configuration BAR0 carries over from GNR legacy VMD as the mechanism
to access the configuration space of the devices owned by VMD. The size
of this window is fixed at 256 MB, where each function consumes 4 KB and
every bus consumes 1 MB.
The shadow and scratchpad registers have been relocated from the VMD
configuration space to the VMD MMIO space in VMD BAR4/BAR5, otherwise
refers to as MEMBAR2 or MSI-X bar.
VMD MSI-X remapping enable/disable is no longer supported.
On this new device, simply obtain the bus hide range and shadow register
values set by BIOS and perform a bus scan.
Also refactor vmd_enable_domain().
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260629165025.268836-1-nirmal.patel@linux.intel.com
|
|
Provide three new kunit-managed helpers for test cases that need to
register/create dynamic software nodes.
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-1-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In some cases, the processor may not actually stick to the "desired"
performance level programmed through the driver's .adjust_perf()
callback and may go above it, which may not be desirable (for instance,
there may be a UCLAMP_MAX limit set for the task currently running on
the given CPU which should be respected).
Address that by adjusting the .adjust_perf() callback to take an
additional argument, max_perf, representing the maximum allowed
performance level of the CPU and update the intel_pstate driver to
take that argument into account as appropriate.
Accordingly, adjust cpufreq_driver_adjust_perf() and the other existing
user of .adjust_perf(), which is the amd-pstate driver (but the behavior
of that driver is not changed).
While at it, also update the cpufreq_driver_adjust_perf()
documentation to reflect this change and some previous code
changes that have not been taken into account in it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/6277654.lOV4Wx5bFT@rafael.j.wysocki
[ rjw: Adjusted Rust function formatting ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
Alexander Usyskin
Maxime Chevallier
Danilo Krummrich
Christophe JAILLET
Greg Kroah-Hartman
Devendra K Verma
Aditya Garg
Siddaraju DH
Dmitry Torokhov
Amit Sunil Dhamne
Xin Long
Breno Leitao
Paolo Abeni
Rafael J. Wysocki
Hans Verkuil
Benoît Monin
Thorsten Blum
Jagadeesh Pagadala
Uwe Kleine-König (The Capable Hub)
Martin K. Petersen
Dave Airlie
Ihor Solodrai
Linus Torvalds
Cosmin Ratiu
Shay Drory
Chuyi Zhou
Stéphane Grosjean
Onur Özkan
Bjorn Andersson
Jingyi Wang
Nirmal Patel
Bartosz Golaszewski