| Age | Commit message (Collapse) | Author | Files | Lines |
|
By reading the code, I found the macro NSEC_PER_SEC
is never referenced in the code. Just remove it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix crash when btf_parse_base() returns an error (Martin Lau)
- Fix out of bounds access in btf_name_valid_section() (Jeongjun Park)
* tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a selftest to check for incorrect names
bpf: add check for invalid name in btf_name_valid_section()
bpf: Fix a crash when btf_parse_base() returns an error pointer
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
|
|
This coverage ensures that kfuncs are allowed within tracepoint and perf
event programs.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20240905223812.141857-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bind_wildcard is compiled but not run, bind_timewait is not compiled.
These two tests complete in a very short time, use the test harness
properly, and seem reasonable to enable.
The author of the tests confirmed via email that these were
intended to be run.
Enable these two tests.
Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Fixes: 2c042e8e54ef ("tcp: Add selftest for bind() and TIME_WAIT.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add description in tools/testing/selftests/bpf/README.rst
for running vmtest on RV64.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-11-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add riscv64 configurations to local vmtest.
We can now perform cross platform testing for riscv64 bpf using the
following command:
PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \
-l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \
./test_progs -d \
\"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \
| cut -d'#' -f1 \
| sed -e 's/^[[:space:]]*//' \
-e 's/[[:space:]]*$//' \
| tr -s '\n' ','\
)\"
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-10-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds DENYLIST.riscv64 file for riscv64. It will help BPF CI
and local vmtest to mask failing and unsupported test cases.
We can use the following command to use deny list in local vmtest as
previously mentioned by Manu.
PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \
-l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \
./test_progs -d \
\"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \
| cut -d'#' -f1 \
| sed -e 's/^[[:space:]]*//' \
-e 's/[[:space:]]*$//' \
| tr -s '\n' ','\
)\"
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-9-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add config.riscv64 for both BPF CI and local vmtest.
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-8-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support cross platform testing for vmtest. The variable $ARCH in the
current script is platform semantics, not kernel semantics. Rename it to
$PLATFORM so that we can easily use $ARCH in cross-compilation. And drop
`set -u` unbound variable check as we will use CROSS_COMPILE env
variable. For now, Using PLATFORM= and CROSS_COMPILE= options will
enable cross platform testing:
PLATFORM=<platform> CROSS_COMPILE=<toolchain> vmtest.sh -- ./test_progs
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-7-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Support vmtest to use local rootfs image generated by [0] that is
consistent with BPF CI. Now we can specify the local rootfs image
through the `-l` parameter like as follows:
vmtest.sh -l ./libbpf-vmtest-rootfs-2024.08.22-noble-amd64.tar.zst -- ./test_progs
Meanwhile, some descriptions have been flushed.
Link: https://github.com/libbpf/ci/blob/main/rootfs/mkrootfs_debian.sh [0]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-6-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The URLS array is only valid in the download_rootfs function and does
not need to be parsed globally in advance. At the same time, the logic
of loading rootfs is refactored to prepare vmtest for supporting local
rootfs.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-5-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It is not always convenient to have LLVM libraries installed inside CI
rootfs images, thus request static libraries from llvm-config.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240905081401.1894789-4-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recently, when compiling bpf selftests on RV64, the following
compilation failure occurred:
progs/bpf_dctcp.c:29:21: error: redefinition of 'fallback' as different kind of symbol
29 | volatile const char fallback[TCP_CA_NAME_MAX];
| ^
/workspace/tools/testing/selftests/bpf/tools/include/vmlinux.h:86812:15: note: previous definition is here
86812 | typedef u32 (*fallback)(u32, const unsigned char *, size_t);
The reason is that the `fallback` symbol has been defined in
arch/riscv/lib/crc32.c, which will cause symbol conflicts when vmlinux.h
is included in bpf_dctcp. Let we rename `fallback` string to
`fallback_cc` in bpf_dctcp to fix this compilation failure.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-3-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The $(let ...) function is only supported by GNU Make version 4.4 [0]
and above, otherwise the following exception file or directory will be
generated:
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
Considering that the GNU Make version of most Linux distributions is
lower than 4.4, let us adapt the corresponding logic to it.
Link: https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html [0]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-2-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Hi, fix some spelling errors in selftest, the details are as follows:
-in the codes:
test_bpf_sk_stoarge_map_iter_fd(void)
->test_bpf_sk_storage_map_iter_fd(void)
load BTF from btf_data.o->load BTF from btf_data.bpf.o
-in the code comments:
preample->preamble
multi-contollers->multi-controllers
errono->errno
unsighed/unsinged->unsigned
egree->egress
shoud->should
regsiter->register
assummed->assumed
conditiona->conditional
rougly->roughly
timetamp->timestamp
ingores->ignores
null-termainted->null-terminated
slepable->sleepable
implemenation->implementation
veriables->variables
timetamps->timestamps
substitue a costant->substitute a constant
secton->section
unreferened->unreferenced
verifer->verifier
libppf->libbpf
...
Signed-off-by: Lin Yikai <yikai.lin@vivo.com>
Link: https://lore.kernel.org/r/20240905110354.3274546-1-yikai.lin@vivo.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The idea is to run same test as for test_pid_filter_process, but instead
of standard fork-ed process we create the process with clone(CLONE_VM..)
to make sure the thread leader process filter works properly in this case.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-5-jolsa@kernel.org
|
|
The idea is to create and monitor 3 uprobes, each trigered in separate
process and make sure the bpf program gets executed just for the proper
PID specified via pid filter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-4-jolsa@kernel.org
|
|
Adding child argument to spawn_child function to allow
to create multiple children in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-3-jolsa@kernel.org
|
|
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
|
|
Filter out nodes that have one of its ancestors disabled as they aren't
expected to probe.
This removes the following false-positive failures on the
sc7180-trogdor-lazor-limozeen-nots-r5 platform:
/soc@0/geniqup@8c0000/i2c@894000/proximity@28
/soc@0/geniqup@ac0000/spi@a90000/ec@0
/soc@0/remoteproc@62400000/glink-edge/apr
/soc@0/remoteproc@62400000/glink-edge/apr/service@3
/soc@0/remoteproc@62400000/glink-edge/apr/service@4
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@7
/soc@0/remoteproc@62400000/glink-edge/apr/service@7/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@8
/soc@0/remoteproc@62400000/glink-edge/apr/service@8/routing
/soc@0/remoteproc@62400000/glink-edge/fastrpc
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@3
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@4
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@5
/soc@0/spmi@c440000/pmic@0/pon@800/pwrkey
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240729-dt-kselftest-parent-disabled-v2-1-d7a001c4930d@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
This also refreshes the -rc1 based branch to -rc5.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Considering that CO-RE direct read access to the first system call
argument is already available on s390 and arm64, let's enable
test_bpf_syscall_macro:syscall_arg1 on these architectures.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240831041934.1629216-4-pulehui@huaweicloud.com
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904014441.1065753-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The core part of the selftest, i.e., the je <-> jmp cycle, mimics the
original sched-ext bpf program. The test will fail without the
previous patch.
I tried to create some cases for other potential cycles
(je <-> je, jmp <-> je and jmp <-> jmp) with similar pattern
to the test in this patch, but failed. So this patch
only contains one test for je <-> jmp cycle.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240904221256.37389-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix eventfs ownership testcase to find mount point if stat -c "%m" failed.
This can happen on the system based on busybox. In this case, this will
try to use the current working directory, which should be a tracefs top
directory (and eventfs is mounted as a part of tracefs.)
If it does not work, the test is skipped as UNRESOLVED because of
the environmental problem.
Fixes: ee9793be08b1 ("tracing/selftests: Add ownership modification tests for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add sched_ext_ops operations to init/exit cgroups, and track task migrations
and config changes. A BPF scheduler may not implement or implement only
subset of cgroup features. The implemented features can be indicated using
%SCX_OPS_HAS_CGOUP_* flags. If cgroup configuration makes use of features
that are not implemented, a warning is triggered.
While a BPF scheduler is being enabled and disabled, relevant cgroup
operations are locked out using scx_cgroup_rwsem. This avoids situations
like task prep taking place while the task is being moved across cgroups,
making things easier for BPF schedulers.
v7: - cgroup interface file visibility toggling is dropped in favor just
warning messages. Dynamically changing interface visiblity caused more
confusion than helping.
v6: - Updated to reflect the removal of SCX_KF_SLEEPABLE.
- Updated to use CONFIG_GROUP_SCHED_WEIGHT and fixes for
!CONFIG_FAIR_GROUP_SCHED && CONFIG_EXT_GROUP_SCHED.
v5: - Flipped the locking order between scx_cgroup_rwsem and
cpus_read_lock() to avoid locking order conflict w/ cpuset. Better
documentation around locking.
- sched_move_task() takes an early exit if the source and destination
are identical. This triggered the warning in scx_cgroup_can_attach()
as it left p->scx.cgrp_moving_from uncleared. Updated the cgroup
migration path so that ops.cgroup_prep_move() is skipped for identity
migrations so that its invocations always match ops.cgroup_move()
one-to-one.
v4: - Example schedulers moved into their own patches.
- Fix build failure when !CONFIG_CGROUP_SCHED, reported by Andrea Righi.
v3: - Make scx_example_pair switch all tasks by default.
- Convert to BPF inline iterators.
- scx_bpf_task_cgroup() is added to determine the current cgroup from
CPU controller's POV. This allows BPF schedulers to accurately track
CPU cgroup membership.
- scx_example_flatcg added. This demonstrates flattened hierarchy
implementation of CPU cgroup control and shows significant performance
improvement when cgroups which are nested multiple levels are under
competition.
v2: - Build fixes for different CONFIG combinations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Josh Don <joshdon@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Barret Rhoden <brho@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrea Righi <andrea.righi@canonical.com>
|
|
The ARRAY_SIZE macro is more compact and more formal in linux source.
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240903072559.292607-1-yangfeng59949@163.com
|
|
Add selftest for cases where btf_name_valid_section() does not properly
check for certain types of names.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Some distros have grub2 config files with the lines
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
which match the skip regex defined for grub2 in get_grub_index():
$skip = '^\s*menuentry';
These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.
Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.
Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If a warning happens at build, give a warning at the end:
Build time: 1 minute 40 seconds
Install time: 17 seconds
Reboot time: 25 seconds
*** WARNING found in build: 1 ***
*******************************************
*******************************************
KTEST RESULT: TEST 1 SUCCESS!!!! **
*******************************************
*******************************************
This way, even if the test isn't made to fail on warnings during the
build, a message is still displayed that warnings were found.
Link: https://lore.kernel.org/<20240819172028.3a7fae09@gandalf.local.home>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When the PROCMAP_QUERY is not defined, a compilation error occurs due to the
mismatch of the procmap_query()'s params, procmap_query() only be called in
the file where the function is defined, modify the params so they can match.
We get a warning when build samples/bpf:
trace_helpers.c:252:5: warning: no previous prototype for ‘procmap_query’ [-Wmissing-prototypes]
252 | int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *start, size_t *offset, int *flags)
| ^~~~~~~~~~~~~
As this function is only used in the file, mark it as 'static'.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Link: https://lore.kernel.org/r/20240903012839.3178-1-chenyuan_fl@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure that we get signal context for POR_EL0 if and only if POE is present
on the system.
Copied from the TPIDR2 test.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-30-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Teach the signal frame parsing about the new POE frame, avoids warning when it
is generated.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-29-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Check that when POE is enabled, the POR_EL0 register is accessible.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-28-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The encoding of the pkey register differs on arm64, than on x86/ppc. On those
platforms, a bit in the register is used to disable permissions, for arm64, a
bit enabled in the register indicates that the permission is allowed.
This drops two asserts of the form:
assert(read_pkey_reg() <= orig_pkey_reg);
Because on arm64 this doesn't hold, due to the encoding.
The pkey must be reset to both access allow and write allow in the signal
handler. pkey_access_allow() works currently for PowerPC as the
PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE have overlapping bits set.
Access to the uc_mcontext is abstracted, as arm64 has a different structure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-27-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
arm64's fpregs are not at a constant offset from sigcontext. Since this is
not an important part of the test, don't print the fpregs pointer on arm64.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-26-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Put this function in the header so that it can be used by other tests, without
needing to link to testcases.c.
This will be used by selftest/mm/protection_keys.c
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-25-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add new system registers:
- POR_EL1
- POR_EL0
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240822151113.1479789-31-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some test scripts are missing executable permissions. It causes warnings
that make the test output unnecessarily verbose. Add executable
permissions.
Link: https://lkml.kernel.org/r/20240827030336.7930-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Python-based tests creates __pycache__/ directory. Remove it with 'make
clean' by defining it as EXTRA_CLEAN.
Link: https://lkml.kernel.org/r/20240827030336.7930-3-sj@kernel.org
Fixes: b5906f5f7359 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "misc fixups for DAMON {self,kunit} tests".
This patchset is for minor fixups of DAMON selftests and kunit tests.
First three patches make DAMON selftests more cleanly maintained (patches
1 and 2) without unnecessary warnings (patch 3). Following six patches
remove unnecessary test case (patch 4), handle configs combinations that
can make tests fail (patches 5-7), reorganize the test files following the
new guideline (patch 8), and add reference kunitconfig for DAMON kunit
tests (patch 9).
This patch (of 9):
DAMON selftests build access_memory_even, but its not on the .gitignore
list. Add it to make 'git status' output cleaner.
Link: https://lkml.kernel.org/r/20240827030336.7930-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240827030336.7930-2-sj@kernel.org
Fixes: c94df805c774 ("selftests/damon: implement a program for even-numbered memory regions access")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 714965ca8252 ("mm/mmap: start distinguishing if vma can be
removed in mergeability test") we relaxed the VMA merge rules for VMAs
possessing a vm_ops->close() hook, permitting this operation in instances
where we wouldn't delete the VMA as part of the merge operation.
This was later corrected in commit fc0c8f9089c2 ("mm, mmap: fix
vma_merge() case 7 with vma_ops->close") to account for a subtle case that
the previous commit had not taken into account.
In both instances, we first rely on is_mergeable_vma() to determine
whether we might be dealing with a VMA that might be removed, taking
advantage of the fact that a 'previous' VMA will never be deleted, only
VMAs that follow it.
The second patch corrects the instance where a merge of the previous VMA
into a subsequent one did not correctly check whether the subsequent VMA
had a vm_ops->close() handler.
Both changes prevent merge cases that are actually permissible (for
instance a merge of a VMA into a following VMA with a vm_ops->close(), but
with no previous VMA, which would result in the next VMA being extended,
not deleted).
In addition, both changes fail to consider the case where a VMA that would
otherwise be merged with the previous and next VMA might have
vm_ops->close(), on the assumption that for this to be the case, all three
would have to have the same vma->vm_file to be mergeable and thus the same
vm_ops.
And in addition both changes operate at 50,000 feet, trying to guess
whether a VMA will be deleted.
As we have majorly refactored the VMA merge operation and de-duplicated
code to the point where we know precisely where deletions will occur, this
patch removes the aforementioned checks altogether and instead explicitly
checks whether a VMA will be deleted.
In cases where a reduced merge is still possible (where we merge both
previous and next VMA but the next VMA has a vm_ops->close hook, meaning
we could just merge the previous and current VMA), we do so, otherwise the
merge is not permitted.
We take advantage of our userland testing to assert that this functions
correctly - replacing the previous limited vm_ops->close() tests with
tests for every single case where we delete a VMA.
We also update all testing for both new and modified VMAs to set
vma->vm_ops->close() in every single instance where this would not prevent
the merge, to assert that we never do so.
Link: https://lkml.kernel.org/r/9f96b8cfeef3d14afabddac3d6144afdfbef2e22.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The existing vma_merge() function is no longer required to handle what
were previously referred to as cases 1-3 (i.e. the merging of a new VMA),
as this is now handled by vma_merge_new_vma().
Additionally, simplify the convoluted control flow of the original,
maintaining identical logic only expressed more clearly and doing away
with a complicated set of cases, rather logically examining each possible
outcome - merging of both the previous and subsequent VMA, merging of the
previous VMA and merging of the subsequent VMA alone.
We now utilise the previously implemented commit_merge() function to share
logic with vma_expand() de-duplicating code and providing less surface
area for bugs and confusion. In order to do so, we adjust this function
to accept parameters specific to merging existing ranges.
Link: https://lkml.kernel.org/r/2cf6016b7bfcc4965fc3cde10827560c42e4f12c.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Abstract vma_merge_new_vma() to use vma_merge_struct and rename the
resultant function vma_merge_new_range() to be clear what the purpose of
this function is - a new VMA is desired in the specified range, and we
wish to see if it is possible to 'merge' surrounding VMAs into this range
rather than having to allocate a new VMA.
Note that this function uses vma_extend() exclusively, so adopts its
requirement that the iterator point at or before the gap. We add an
assert to this effect.
This is as opposed to vma_merge_existing_range(), which will be introduced
in a subsequent commit, and provide the same functionality for cases in
which we are modifying an existing VMA.
In mmap_region() and do_brk_flags() we open code scenarios where we prefer
to use vma_expand() rather than invoke a full vma_merge() operation.
Abstract this logic and eliminate all of the open-coding, and also use the
same logic for all cases where we add new VMAs to, rather than ultimately
use vma_merge(), rather use vma_expand().
Doing so removes duplication and simplifies VMA merging in all such cases,
laying the ground for us to eliminate the merging of new VMAs in
vma_merge() altogether.
Also add the ability for the vmg to track state, and able to report
errors, allowing for us to differentiate a failed merge from an inability
to allocate memory in callers.
This makes it far easier to understand what is happening in these cases
avoiding confusion, bugs and allowing for future optimisation.
Also introduce vma_iter_next_rewind() to allow for retrieval of the next,
and (optionally) the prev VMA, rewinding to the start of the previous gap.
Introduce are_anon_vmas_compatible() to abstract individual VMA anon_vma
comparison for the case of merging on both sides where the anon_vma of the
VMA being merged maybe compatible with prev and next, but prev and next's
anon_vma's may not be compatible with each other.
Finally also introduce can_vma_merge_left() / can_vma_merge_right() to
check adjacent VMA compatibility and that they are indeed adjacent.
Link: https://lkml.kernel.org/r/49d37c0769b6b9dc03b27fe4d059173832556392.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The purpose of the vmg is to thread merge state through functions and
avoid egregious parameter lists. We expand this to vma_expand(), which is
used for a number of merge cases.
Accordingly, adjust its callers, mmap_region() and relocate_vma_down(), to
use a vmg.
An added purpose of this change is the ability in a future commit to
perform all new VMA range merging using vma_expand().
Link: https://lkml.kernel.org/r/4bc8c9dbc9ca52452ef8e587b28fe555854ceb38.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|