linux-dev/Documentation/devicetree/bindings/arm/omap, branch master

dt-bindings: omap: Add clock-output-names and #clock-cells

2022-04-11T13:02:12Z

This allows us to use clock-output-names for the clock manager instance name instead of relying on non-standard node names. Cc: Stephen Boyd Cc: Tero Kristo Signed-off-by: Tony Lindgren Acked-by: Rob Herring Message-Id: <20220203112337.19821-1-tony@atomide.com>

ARM: dts: Fix timer regression for beagleboard revision c

2021-12-17T12:15:43Z

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") caused a timer regression for beagleboard revision c where the system clockevent stops working if omap3isp module is unloaded. Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks applied that limit the usable timers for no good reason. This also affects the power management as we use the system clock instead of the 32k clock source. Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer quirks. This allows us to remove the timer quirks for later beagleboard revisions. We also need to update the related timer quirk check for the correct compatible property. Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Cc: linux-kernel@vger.kernel.org Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Rob Herring Reported-by: Jarkko Nikula Tested-by: Jarkko Nikula Signed-off-by: Tony Lindgren

dt-bindings: omap: Update PRM binding for genpd

2020-08-18T07:40:02Z

The PRM (Power and Reset Module) has a register to enable and disable the related power domain, so let's update the binding for that. Signed-off-by: Tony Lindgren Acked-by: Santosh Shilimkar Acked-by: Rob Herring Cc: devicetree@vger.kernel.org Cc: Rob Herring Signed-off-by: Tony Lindgren

docs: dt: fix several broken references due to renames

2020-02-24T18:12:44Z

Several DT references got broken due to txt->yaml conversion. Those are auto-fixed by running: scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab Acked-by: Andrew Jeffery Reviewed-by: Dan Murphy Reviewed-by: Amit Kucheria Signed-off-by: Rob Herring

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-12-05T19:43:31Z

Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...

DTS: bindings: omap: update bindings documentation

2019-10-10T10:41:50Z

* clarify that we now need either "ti,omap3430" or "ti,omap3630" or "ti,am3517" for omap3 chips * clarify that "ti,omap3" has no default * clarify that AM33x is not an "ti,omap3" * clarify that the list of boards is incomplete * remove some "ti,am33xx", "ti,omap3" * add some missing "ti,omap4" Signed-off-by: H. Nikolaus Schaller Acked-by: Tony Lindgren Tested-by: Adam Ford Signed-off-by: Viresh Kumar

dt-bindings: omap: add new binding for PRM instances

2019-10-09T15:55:36Z

Add new binding for OMAP PRM (Power and Reset Manager) instances. Each of these will act as a power domain controller and potentially as a reset provider. Signed-off-by: Tero Kristo Reviewed-by: Rob Herring Reviewed-by: Tony Lindgren Signed-off-by: Santosh Shilimkar

Merge tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

2019-06-19T13:36:25Z

dts changes for omap variants for v5.3 This series of changes improves support for few boards: - configure another lcd type for logicpd torpedo devkit - a series of updates for am335x phytec boards - configure mmc card detect pin for am335x-baltos * tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-baltos: add support for MMC1 CD pin ARM: dts: am335x-baltos: Fix PHY mode for ethernet ARM: dts: Add support for phyBOARD-REGOR-AM335x ARM: dts: am335x-pcm-953: Remove eth phy delay ARM: dts: am335x-pcm-953: Update user led names ARM: dts: am335x-phycore-som: Enable gpmc node in dts files ARM: dts: am335x-phycore-som: Add emmc node ARM: dts: am335x phytec boards: Remove regulator node ARM: dts: Add LCD type 28 support to LogicPD Torpedo DM3730 devkit Signed-off-by: Olof Johansson

ARM: dts: Add support for phyBOARD-REGOR-AM335x

2019-06-10T12:06:44Z

Adding support for phyBOARD-REGOR-AM335x: - CAN - UART0 / UART2 - RS485 - USB device - i2c RTC - SD - ethernet0 RMII - ethernet1 MII - Digital I/Os Signed-off-by: Teresa Remmet Signed-off-by: Tony Lindgren

dt: fix refs that were renamed to json with the same file name

2019-05-22T14:01:01Z

These files were converted to json-schema, but the references weren't renamed. Fixes: 66ed144f147a ("dt-bindings: interrupt-controller: Convert ARM GIC to json-schema") (and other similar commits) Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Rob Herring