linux-dev/Documentation/devicetree/bindings/iio/accel, branch master

dt-bindings: iio: accel: adxl313: Add compatibles for adxl312 and adxl314

2022-09-21T17:42:53Z

Extend the adi,adxl313.yaml file with information regrding the ADXL312 and ADXL314 devices. Signed-off-by: George Mois Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220905132018.364900-1-george.mois@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver

2022-08-30T17:35:38Z

Introduce devicetree binding json-schema for MSA311 tri-axial, low-g accelerometer driver. Signed-off-by: Dmitry Rokosov Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220822175011.2886-5-ddrokosov@sberdevices.ru Signed-off-by: Jonathan Cameron

dt-bindings: iio: accel: use spi-peripheral-props.yaml

2022-08-19T18:34:16Z

Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: Drop Joachim Eastwood

2022-08-12T17:13:32Z

Emails to Joachim Eastwood bounce ("552 5.2.2 The email account that you tried to reach is over quota and inactive."). Signed-off-by: Krzysztof Kozlowski Acked-by: Jonathan Cameron Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220809162752.10186-2-krzysztof.kozlowski@linaro.org

dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address

2022-06-18T16:25:05Z

Align the example node address and reg content to be 0x2a for both. Signed-off-by: Marek Vasut Cc: Alexandru Ardelean Cc: Hartmut Knaack Cc: Jonathan Cameron Cc: Lars-Peter Clausen Cc: Michael Hennerich Cc: Peter Meerwald-Stadler Cc: Rob Herring Cc: linux-iio@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220615233411.90621-1-marex@denx.de Signed-off-by: Jonathan Cameron

dt-bindings: iio: accel: sca3300: Document murata,scl3300

2022-06-14T10:53:09Z

Add DT bindings for Murata scl3300 inclinometer. Reviewed-by: Rob Herring Signed-off-by: LI Qingwu Reviewed-by: Tomas Melin Link: https://lore.kernel.org/r/20220529061853.3044893-2-Qing-wu.Li@leica-geosystems.com.cn Signed-off-by: Jonathan Cameron

dt-bindings: iio: accel: Add bmi085 and bmi090l bindings

2022-06-11T13:35:28Z

Adds the device-tree bindings for the Bosch BMI085 and BMI090L IMU, the accelerometer part. Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi085-ds001.pdf Datasheet: https://media.digikey.com/pdf/Data%20Sheets/Bosch/BST-BMI090L-DS000-00.pdf Signed-off-by: LI Qingwu Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220526133359.2261928-7-Qing-wu.Li@leica-geosystems.com.cn Signed-off-by: Jonathan Cameron

dt-bindings: iio: accel: ADIS16240: update maintainers

2022-06-11T13:35:28Z

Update bindings maintainerns section. Signed-off-by: Alexandru Tachici Acked-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20220526134603.75216-2-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: accel: add ADXL367

2022-02-21T19:33:06Z

The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. The ADXL367 does not alias input signals to achieve ultralow power consumption, it samples the full bandwidth of the sensor at all data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, with a resolution of 0.25mg/LSB on the +-2 g range. In addition to its ultralow power consumption, the ADXL367 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and an internal ADC for synchronous conversion of an additional analog input. Signed-off-by: Cosmin Tanislav Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220214073810.781016-5-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: kionix,kxcjk1013: driver support interrupts

2021-10-17T10:05:55Z

Device has interrupts support, which description was missing in the bindings. Signed-off-by: David Heidelberg Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210919203656.119742-1-david@ixit.cz Signed-off-by: Jonathan Cameron