linux-dev/Documentation/devicetree/bindings/iio/frequency, branch master

dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml

2022-08-19T18:34:16Z

Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-6-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: frequency: Add ADMV4420 doc

2022-02-27T12:14:52Z

Add device tree bindings for the ADMV4420 K band downconverter. Signed-off-by: Cristian Pop Acked-by: Rob Herring Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220223130808.13352-1-cristian.pop@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: frequency: add admv1014 binding

2022-02-21T19:33:06Z

Add device tree bindings for the ADMV1014 Upconverter. Signed-off-by: Antoniu Miclaus Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220215081216.67706-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: frequency: add admv1013 doc

2021-12-23T11:53:48Z

Add device tree bindings for the ADMV1013 Upconverter. Signed-off-by: Antoniu Miclaus Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20211221112206.97066-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: frequency: add adrf6780 doc

2021-10-21T20:00:59Z

Add device tree bindings for the ADRF6780 Upconverter. Reviewed-by: Rob Herring Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20211021113244.56936-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron

dt-bindings:iio:frequency:adi,adf4350: txt to yaml format conversion.

2020-11-25T14:36:12Z

This is a large but fairly simple binding. It may well be possible to constrain some of the properties more than currently done, but that would involve diving into datasheets for the supported parts. Hence for this initial conversion just use the information that was in the txt file. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Cc: Michael Hennerich Link: https://lore.kernel.org/r/20201031184854.745828-46-jic23@kernel.org

dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'

2020-10-07T16:28:30Z

In cases where we don't reference another schema, 'additionalProperties' can be used instead. This is preferred for now as 'unevaluatedProperties' support isn't implemented yet. In a few cases, this means adding some missing property definitions of which most are for SPI bus properties. 'unevaluatedProperties' is not going to work for the SPI bus properties anyways as they are evaluated from the parent node, not the SPI child node. Acked-by: Mark Brown Acked-by: Krzysztof Kozlowski Acked-by: Lee Jones Acked-by: Jonathan Cameron Acked-by: Guenter Roeck Link: https://lore.kernel.org/r/20201005183830.486085-3-robh@kernel.org Signed-off-by: Rob Herring

dt-bindings: Add missing 'unevaluatedProperties'

2020-10-07T16:26:41Z

This doesn't yet do anything in the tools, but make it explicit so we can check either 'unevaluatedProperties' or 'additionalProperties' is present in schemas. 'unevaluatedProperties' is appropriate when including another schema (via '$ref') and all possible properties and/or child nodes are not explicitly listed in the schema with the '$ref'. This is in preparation to add a meta-schema to check for missing 'unevaluatedProperties' or 'additionalProperties'. This has been a constant source of review issues. Acked-by: Mark Brown Acked-by: Wolfram Sang Acked-by: Krzysztof Kozlowski Acked-By: Vinod Koul Acked-by: Geert Uytterhoeven Acked-by: Ulf Hansson Acked-by: Guenter Roeck Acked-by: Mathieu Poirier Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org Signed-off-by: Rob Herring

iio: frequency: adf4371: Add support for output stage mute

2019-06-26T20:24:21Z

Another feature of the ADF4371/ADF4372 is that the supply current to the RF8P and RF8N output stage can shut down until the ADF4371 achieves lock as measured by the digital lock detect circuitry. The mute to lock detect bit (MUTE_LD) in REG25 enables this function. Signed-off-by: Stefan Popa Signed-off-by: Jonathan Cameron

dt-bindings: iio: frequency: Add ADF4372 PLL documentation

2019-06-26T20:24:21Z

Document support for ADF4372 SPI Wideband Synthesizer. Signed-off-by: Stefan Popa Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron