linux-dev/Documentation/devicetree/bindings/iio/gyroscope, branch master

dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins

2022-08-21T17:24:16Z

BMG160 has two interrupt pins to which interrupts can be freely mapped. Correct the schema to express such case and fix warnings like: qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long However the basic issue still persists - the interrupts should come in a defined order. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220805075503.16983-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: Use correct vendor prefix for Asahi Kasei Corp.

2021-12-06T20:21:40Z

The old "ak" vendor prefix that was never officially accepted was still being used in some examples. Convert to the correct vendor prefix (i.e. "asahi-kasei"). Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20211206144802.217073-1-thierry.reding@gmail.com Signed-off-by: Rob Herring

dt-bindings: Clean-up undocumented compatible strings

2021-03-23T21:27:51Z

Adding checks for undocumented compatible strings reveals a bunch of warnings in the DT binding examples. Fix the cases which are typos, just a mismatch between the schema and the example, or aren't documented at all. In a couple of cases, fixing the compatible revealed some schema errors which are fixed. There's a bunch of others remaining after this which have bindings, but those aren't converted to schema yet. Cc: Thierry Reding Cc: Sam Ravnborg Cc: Pavel Machek Cc: linux-clk@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-i3c@lists.infradead.org Cc: linux-iio@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring Acked-by: Mark Brown Acked-by: Stephen Boyd Acked-by: Greg Kroah-Hartman Acked-by: Kishon Vijay Abraham I Acked-by: Sebastian Reichel Acked-by: Maxime Ripard Acked-by: Vinod Koul Acked-by: Alexandre Belloni Acked-by: Alain Volmat Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/20210316194918.3528417-1-robh@kernel.org

dt-bindings: iio: gyroscope: bmg160: Document regulator supplies

2021-01-22T08:52:01Z

BMG160 needs VDD and VDDIO regulators that might need to be explicitly enabled. Document support for vdd/vddio-supply to implement this. Signed-off-by: Stephan Gerhold Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201211183815.51269-1-stephan@gerhold.net Signed-off-by: Jonathan Cameron

dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.

2021-01-09T14:25:29Z

Very similar to the mpu6050 binding. Only unusual element is the i2c-gate section. Example tweaked a little to include a real device behind the gate. As Rob Herring suggested, dropped use of explicit i2c-gate yaml binding in favour of just using the i2c-controller.yaml binding directly. Signed-off-by: Jonathan Cameron Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201128173343.390165-4-jic23@kernel.org

dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion.

2020-11-25T14:36:09Z

Very simple direct conversion of existing txt file. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Cc: H. Nikolaus Schaller Link: https://lore.kernel.org/r/20201031184854.745828-44-jic23@kernel.org

dt-bindings: fxas21002c: convert bindings to yaml

2020-10-31T15:02:29Z

Convert fxas21002c gyroscope sensor bindings documentation to yaml schema, remove the textual bindings document and update MAINTAINERS entry. Signed-off-by: Rui Miguel Silva Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201014104926.688666-1-rmfrfs@gmail.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: gyro: adxrs290: Add interrupts support

2020-09-13T09:51:46Z

Include 'interrupts' property and provide a suitable example for using a GPIO interrupt line. Signed-off-by: Nishant Malpani Link: https://lore.kernel.org/r/20200910180450.29696-3-nish.malpani25@gmail.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: gyro: Add DT binding doc for ADXRS290

2020-08-22T09:53:21Z

Add devicetree binding document for ADXRS290, a dual-axis MEMS gyroscope. Reviewed-by: Rob Herring Signed-off-by: Nishant Malpani Signed-off-by: Jonathan Cameron

iio/gyro/bmg160: Add support for BMI088 chip

2020-04-19T15:56:13Z

The BMI088 is pin-compatible with the BMI055, and provides both gyro and accel functions. The gyro part is similar to the BMI055 and this adds the chip to the list of supported devices for the gyro part. The accel part of the chip is not compatible with anything existing already. Signed-off-by: Mike Looijmans Signed-off-by: Jonathan Cameron