linux-dev/Documentation/devicetree/bindings/iio/imu, branch master

dt-bindings: iio/imu: Add Bosch BNO055

2022-09-21T17:42:56Z

Introduce new documentation file for the Bosch BNO055 IMU. Signed-off-by: Andrea Merello Reviewed-by: Rob Herring Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220907132205.28021-12-andrea.merello@iit.it Signed-off-by: Jonathan Cameron

dt-bindings: iio: imu: st_lsm6dsx: add lsm6dstx device bindings

2022-09-21T17:42:55Z

Add device bindings for lsm6dstx IMU sensor. Use lsm6dst as fallback device for lsm6dstx since it implements all the features currently supported by lsm6dstx. Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/dadc2acf88b0b73feac9a8980ad9af1658297bc1.1663262890.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: imu: use spi-peripheral-props.yaml

2022-08-19T18:34:16Z

Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220816124321.67817-8-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings: Drop Robert Jones

2022-08-12T17:13:32Z

Emails to Robert Jones bounce ("550 5.2.1 The email account that you tried to reach is disabled"). Signed-off-by: Krzysztof Kozlowski Acked-by: Jonathan Cameron Acked-by: Lee Jones Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220809162752.10186-5-krzysztof.kozlowski@linaro.org

dt-bindings: iio: imu: adis16480: update maintainers

2022-06-11T13:35:28Z

Update bindings maintainerns section. Signed-off-by: Alexandru Tachici Acked-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20220526134603.75216-6-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhx device bindings

2022-04-28T18:22:54Z

Add device bindings for asm330lhhx IMU sensor. Use lsm6dsr as fallback device for asm330lhhx since it implements all the features currently supported by asm330lhhx. Signed-off-by: Lorenzo Bianconi Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/2e5304b7e11085d4e701b4b591fd79cc54f01301.1649100168.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron

dt-bindings: iio: imu: mpu6050: Document invensense,icm20608d

2022-04-04T08:11:24Z

ICM-20608-D differs from the other ICM-20608 variants by having a DMP (Digital Motion Processor) core tacked on. Despite having a different WHOAMI register, this variant is completely interchangeable with the other ICM-20608 variants by simply pretending the DMP core doesn't exist. Signed-off-by: Michael Srba Acked-by: Rob Herring Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220323121550.16096-2-michael.srba@seznam.cz Signed-off-by: Jonathan Cameron

Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-01-14T15:02:28Z

Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ...

dt-bindings: Use correct vendor prefix for Asahi Kasei Corp.

2021-12-06T20:21:40Z

The old "ak" vendor prefix that was never officially accepted was still being used in some examples. Convert to the correct vendor prefix (i.e. "asahi-kasei"). Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20211206144802.217073-1-thierry.reding@gmail.com Signed-off-by: Rob Herring

Documentation: dt: iio: st_lsm6dsx: add disable-sensor-hub property

2021-12-04T15:34:18Z

Enable/disable internal i2c controller slave autoprobing at bootstrap. Disable sensor-hub is useful if i2c controller clock/data lines are connected through a pull-up with other chip lines (e.g. SDO/SA0). Signed-off-by: Lorenzo Bianconi Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/54287a93922ac839501b776d288cc368aa81f0ab.1636816719.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron