linux-dev/Documentation/devicetree/bindings/iio/pressure, branch master

dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string

2022-09-21T17:42:54Z

Add bosch,bmp380 compatible string for the new family of sensors. This family includes the BMP380, BMP384 and BMP388. The register map in this family changes substantially and introduces new features but core concepts and operations carryover from the previous iterations Signed-off-by: Angel Iglesias Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/67224da4ae308bb752fc8fdecc54345cedab6c21.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron

dt-bindings: iio: Drop Tomislav Denis

2022-08-19T17:56:04Z

Emails to Tomislav Denis bounce ("550 5.1.1 User Unknown"). Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220816125401.70317-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

dt-bindings:iio:pressure:hoperf,hp03 yaml conversion

2020-11-16T19:12:47Z

One quirk in the txt file was that the xclr gpio was specified as xclr-gpio rather than xclr-gpios. I've fixed that in the yaml version. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Cc: Marek Vasut Link: https://lore.kernel.org/r/20201031134110.724233-9-jic23@kernel.org

dt-bindings:iio:pressure:meas,ms5611 yaml conversion.

2020-11-16T19:11:28Z

One addition here was to put in a 20MHz maximum for the SPI bus as specified in the datasheets of both support parts. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Cc: Tomasz Duszynski Link: https://lore.kernel.org/r/20201031134110.724233-8-jic23@kernel.org

dt-bindings:iio:pressure:murata,zpa2326 yaml conversion

2020-11-16T19:10:01Z

Simple conversion with a few minor tweaks: * I added 1MHz max for spi-max-frequency * I have give myself as the maintainer. This driver was written by Gregor Boirie but I don't have an up to date email address for Gregor. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201031134110.724233-7-jic23@kernel.org

dt-bindings:iio:pressure:ms5637 Drop separate doc + add to trivial-devices

2020-11-16T19:08:51Z

Very simple binding for this i2c device with no properties beyond reg and compatible. Hence doesn't need it's own document. Signed-off-by: Jonathan Cameron Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201031134110.724233-6-jic23@kernel.org

Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio

2020-07-13T14:05:58Z

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Reviewed-by: Matt Ranostay #for Matt's drivers Signed-off-by: Jonathan Cameron

dt-bindings: Add missing 'additionalProperties: false'

2020-03-31T15:03:17Z

Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring Reviewed-by: Neil Armstrong Acked-by: Mark Brown Acked-by: Jonathan Cameron Acked-by: Alexandru Ardelean Reviewed-by: Benjamin Gaignard Acked-by: Stephen Boyd # clock Acked-by: Lee Jones

dt-bindings: Clean-up schema errors due to missing 'addtionalProperties: false'

2020-03-27T14:27:58Z

Numerous schemas are missing 'additionalProperties: false' statements which ensures a binding doesn't have any extra undocumented properties or child nodes. Fixing this reveals various missing properties, so let's fix all those occurrences. Signed-off-by: Rob Herring Reviewed-by: Neil Armstrong Acked-by: Alexandru Ardelean Acked-by: Jonathan Cameron #for-iio Acked-by: Stephen Boyd # clock Acked-by: Lee Jones Reviewed-by: Linus Walleij Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: Guillaume La Roque Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Brown Cc: linux-iio@vger.kernel.org Cc: Lars-Peter Clausen Cc: linux-clk@vger.kernel.org Cc: Thomas Gleixner Cc: Kevin Hilman Cc: "David S. Miller" Cc: Hartmut Knaack Cc: Peter Meerwald-Stadler Cc: linux-amlogic@lists.infradead.org Cc: linux-pm@vger.kernel.org Cc: Masahiro Yamada Cc: Bartosz Golaszewski Cc: Liam Girdwood Cc: Mauro Carvalho Chehab Cc: linux-gpio@vger.kernel.org Cc: Daniel Lezcano Cc: Zhang Rui Cc: linux-media@vger.kernel.org Cc: Lee Jones

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2020-01-10T09:44:00Z

Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ...