linux-dev/Documentation/devicetree/bindings/net/nfc, branch master

MAINTAINERS: nfc: s3fwrn5: Drop Krzysztof Opasiak

2022-10-14T08:14:49Z

Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and driver. Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

dt-bindings: nfc: marvell,nci: fix reset line polarity in examples

2022-10-01T01:17:37Z

The reset line is supposed to be "active low" (it even says so in the description), but examples incorrectly show it as "active high" (likely because original examples use 0 which is technically "active high" but in practice often "don't care" if the driver is using legacy gpio API, as this one does). Signed-off-by: Dmitry Torokhov Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/YzX+nzJolxAKmt+z@google.com Signed-off-by: Jakub Kicinski

Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-08-05T01:08:34Z

Pull devicetree updates from Rob Herring: "Bindings: - Add spi-peripheral-props.yaml references to various SPI device bindings - Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x, skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite bindings to DT schema format - New bindings for Arm virtual platforms display, Qualcomm IMEM memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and arm,cortex-a78ae - Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec, quanta, and densitron - Add missing MSI and IOMMU properties to host-generic-pci - Remove bindings for removed EFM32 platform - Remove old chosen.txt binding (replaced by schema) - Treewide add missing type information for properties - Treewide fixing of typos and its vs. it's in bindings. Its all good now. - Drop unnecessary quoting in power related schemas - Several LED binding updates which didn't get picked up - Move various bindings to proper directories DT core code: - Convert unittest GPIO related tests to use fwnode - Check ima-kexec-buffer against memory bounds - Print reserved-memory allocation/reservation failures as errors - Cleanup early_init_dt_reserve_memory_arch() - Simplify of_overlay_fdt_apply() tail" * tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits) dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml dt-bindings: power: supply: drop quotes when not needed dt-bindings: power: reset: drop quotes when not needed dt-bindings: power: drop quotes when not needed dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties of/fdt: declared return type does not match actual return type devicetree/bindings: correct possessive "its" typos dt-bindings: net: convert emac_rockchip.txt to YAML dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory dt-bindings: eeprom: at25: use spi-peripheral-props.yaml dt-bindings: display: use spi-peripheral-props.yaml dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema dt-bindings: power: reset: qcom,pon: use absolute path to other schema dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts' dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat' dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode' of/fdt: Clean up early_init_dt_reserve_memory_arch() dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high' dt-bindings: rtc: Add EM Microelectronic EM3027 bindings dt-bindings: rtc: ds1307: Convert to json-schema ...

dt-bindings: nfc: use spi-peripheral-props.yaml

2022-07-29T05:26:52Z

Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220727164130.385411-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski

dt-bindings: nfc: nxp,nci: drop Charles Gorand's mail

2022-06-28T20:15:36Z

Mails to Charles get an auto reply, that he is no longer working at Eff'Innov technologies. Remove the entry. Signed-off-by: Michael Walle Reviewed-by: Krzysztof Kozlowski Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220628070959.187734-1-michael@walle.cc

dt-bindings: update Krzysztof Kozlowski's email

2022-04-04T13:43:20Z

Krzysztof Kozlowski's @canonical.com email stopped working, so switch to generic @kernel.org account for all Devicetree bindings. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org

dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

2021-10-28T12:27:26Z

Convert bindings for NXP PN544 NFC driver to YAML syntax. Signed-off-by: David Heidelberg Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211017160210.85543-1-david@ixit.cz Signed-off-by: Rob Herring

dt-bindings: nfc: marvell,nci: convert to dtschema

2021-10-18T20:17:17Z

Convert the Marvell NCI NFC controller to DT schema format. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211011073934.34340-9-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring

dt-bindings: nfc: ti,trf7970a: convert to dtschema

2021-10-18T20:17:09Z

Convert the TI TRF7970A NFC to DT schema format. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211011073934.34340-8-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring

dt-bindings: nfc: st,nci: convert to dtschema

2021-10-18T20:17:01Z

Convert the ST NCI (ST21NFCB) NFC controller to DT schema format. Changes during bindings conversion: 1. Add a new required "reg" property for SPI binding, because SPI child devices use it as chip-select. 2. Drop the "clock-frequency" property during conversion because it is a property of I2C bus controller, not I2C slave device. It was also never used by the driver. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211011073934.34340-7-krzysztof.kozlowski@canonical.com Signed-off-by: Rob Herring