linux-dev/Documentation/devicetree/bindings/net, branch master

dt-bindings: net: tsnep: Fix typo on generic nvmem property

2022-11-08T01:53:42Z

While working on the nvmem description I figured out this file had the "nvmem-cell-names" property name misspelled. Fix the typo, as "nvmem-cells-names" has never existed. Fixes: 603094b2cdb7 ("dt-bindings: net: Add tsnep Ethernet controller") Signed-off-by: Miquel Raynal Reviewed-by: Gerhard Engleder Acked-by: Rob Herring Link: https://lore.kernel.org/r/20221104162147.1288230-1-miquel.raynal@bootlin.com Signed-off-by: Jakub Kicinski

MAINTAINERS: nfc: s3fwrn5: Drop Krzysztof Opasiak

2022-10-14T08:14:49Z

Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and driver. Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-10-10T20:13:51Z

Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...

Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-10-06T18:13:04Z

Pull ARM devicetree updates from Arnd Bergmann: "Most of the changes fall into one of three categories: adding support for additional devices on existing machines, cleaning up issues found by the ongoing conversion to machine-readable bindings, and addressing minor mistakes in the existing DT data. Across SoC vendors, Qualcomm and Freescale stick out as getting the most updates, which corresponds to their dominance in the mobile phone and embedded industrial markets, respectively. There are 636 non-merge changeset in this branch, which is a little lower than most times, but more importantly we only add 36 machine files, which is about half of what we had the past few releases. Eight new SoCs are added, but all of them are variations of already supported SoC families, and most of them come with one reference board design from the SoC vendor: - Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55 cores. - TI AM62A is another member of the K3 family with Cortex-A53 cores, this one is targetted at Video/Vision processing for industrial and automotive applications. - NXP i.MX8DXL is another chip for this market in the ever-growing i.MX8 family, this one again with two Cortex-A35 cores. - Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are minor updates of R8A77951 and R8A77980, respectively. - Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the IPQ8064 chip, with minimally different features. The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close this time, but in the end did not make the cut. The new machines based on existing SoC support are fairly uneventful: - Sony Xperia 1 IV is a fairly recent phone based on Qualcomm Snapdragon 8 Gen 1. - Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and Grand Max. These are added for both 32-bit and 64-bit kernels, as they originally shipped running 32-bit code. - Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt. Mitchell - Three new machines based on Rockchips RK3399 and RK3566: Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab - Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S, i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board - Two development boards in the Microchip AT91 family: SAMA5D3-EDS and lan966x-pcb8290. - Minor variants of existing boards using Amlogic, Broadcom, Marvell, Rockchips, Freescale Layerscape and Socionext Uniphier SoCs" * tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits) Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ...

dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller

2022-10-04T00:33:57Z

Add bindings for the regulator based Ethernet PoDL PSE controller and generic bindings for all PSE controllers. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Reviewed-by: Rob Herring Signed-off-by: Jakub Kicinski

dt-bindings: net: phy: add PoDL PSE property

2022-10-04T00:33:56Z

Add property to reference node representing a PoDL Power Sourcing Equipment. Signed-off-by: Oleksij Rempel Reviewed-by: Rob Herring Signed-off-by: Jakub Kicinski

dt-bindings: nfc: marvell,nci: fix reset line polarity in examples

2022-10-01T01:17:37Z

The reset line is supposed to be "active low" (it even says so in the description), but examples incorrectly show it as "active high" (likely because original examples use 0 which is technically "active high" but in practice often "don't care" if the driver is using legacy gpio API, as this one does). Signed-off-by: Dmitry Torokhov Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/YzX+nzJolxAKmt+z@google.com Signed-off-by: Jakub Kicinski

Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2022-09-30T17:07:31Z

Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski

dt-bindings: net: snps,dwmac: add new property snps,clk-csr

2022-09-30T12:04:23Z

Add description for new property snps,clk-csr in binding file Signed-off-by: Jianguo Zhang Reviewed-by: Krzysztof Kozlowski Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: David S. Miller

dt-bindings: net: mediatek-dwmac: add support for mt8188

2022-09-30T12:04:23Z

Add binding document for the ethernet on mt8188 Signed-off-by: Jianguo Zhang Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller