linux-dev/Documentation/devicetree/bindings/pinctrl, branch master

Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"

2022-10-18T07:50:29Z

This reverts commit 133ad0d9af99bdca90705dadd8d31c20bfc9919f. On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware) using these pinctrl properties can cause system hang because there is missing feature autodetection. When this feature is implemented, support for these two properties should bring back. Cc: stable@vger.kernel.org Signed-off-by: Sai Krishna Potthuri Acked-by: Michal Simek Link: https://lore.kernel.org/r/20221017130303.21746-3-sai.krishna.potthuri@amd.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-10-11T17:59:59Z

Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...

Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-10-10T20:13:51Z

Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...

pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"

2022-10-04T08:47:48Z

Add the SoC name to make it more clear. Also the next generation StarFive SoCs will use "pinctrl-starfive" as the core of StarFive pinctrl driver. No functional change. Signed-off-by: Jianlong Huang Signed-off-by: Hal Feng Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220930061404.5418-1-hal.feng@linux.starfivetech.com Signed-off-by: Linus Walleij

dt-bindings: pinctrl: st,stm32: Document interrupt-controller property

2022-10-04T08:38:58Z

Document interrupt-controller property and its interrupt-cells. This fixes dtbs_check warnings when building current Linux DTs: " arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: pinctrl@50002000: gpio@5000a000: '#interrupt-cells', 'interrupt-controller' do not match any of the regexes: 'pinctrl-[0-9]+' " Signed-off-by: Marek Vasut Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220926204752.381798-1-marex@denx.de Signed-off-by: Linus Walleij

dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property

2022-10-04T08:38:02Z

Document gpio-hog pattern property and its subnodes. This fixes dtbs_check warnings when building current Linux DTs: " arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: pinctrl@50002000: gpio@50003000: 'rs485-rx-en-hog' does not match any of the regexes: 'pinctrl-[0-9]+' " Signed-off-by: Marek Vasut Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220926204735.381779-1-marex@denx.de Signed-off-by: Linus Walleij

dt-bindings: pinctrl: st,stm32: Document gpio-line-names

2022-10-04T08:37:09Z

Document gpio-line-names property as valid property. This fixes dtbs_check warnings when building current Linux DTs: " arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: pinctrl@50002000: gpio@50009000: 'gpio-line-names' does not match any of the regexes: 'pinctrl-[0-9]+' " Signed-off-by: Marek Vasut Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220926204724.381760-1-marex@denx.de Signed-off-by: Linus Walleij

dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings

2022-09-19T11:52:13Z

Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation to include compatible strings for PM7250B and PM8450 PMICs. Signed-off-by: Anjelique Melendez Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220912210624.4527-5-quic_amelende@quicinc.com Signed-off-by: Linus Walleij

dt-bindings: pinctrl: update bindings for MT7986 SoC

2022-09-14T12:54:34Z

Add wifi pins in the description and set 'maxItems' for groups and pins. Reviewed-by: Sam Shih Signed-off-by: Peter Chiu Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220912092440.21011-1-chui-hao.chiu@mediatek.com Signed-off-by: Linus Walleij

Merge tag 'samsung-pinctrl-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel

2022-09-14T12:28:47Z

Samsung pinctrl drivers changes for v6.1 1. Minor fix in order of initializing pinctrl driver - GPIOs should be configured before registering gpiolib. 2. Final steps to deprecated bindings headers with register constants. The constants were moved to include files in DTS directories, because these are not suitable for bindings. Remove final references and mark binding header as deprecated to warn any users.