linux-dev/Documentation/devicetree/bindings/reset, branch master

Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-10-10T20:13:51Z

Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...

dt-bindings: Remove 'Device Tree Bindings' from end of title:

2022-08-25T19:06:57Z

As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring

MAINTAINERS: Update email of Neil Armstrong

2022-08-18T17:23:00Z

My professional e-mail will change and the BayLibre one will bounce after mid-september of 2022. This updates the MAINTAINERS file, the YAML bindings and adds an entry in the .mailmap file. Signed-off-by: Neil Armstrong Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220816095617.948678-1-narmstrong@baylibre.com

Merge tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2022-08-12T16:37:33Z

Pull power supply and reset updates from Sebastian Reichel: "No core patches, only driver updates: - pwr-mlxbf: new reset driver for Mellanox BlueField - at91-reset: SAMA7G5 support - ab8500: continue refurbishing - misc minor fixes" * tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits) power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind power: supply: ab8500: Remove flush_scheduled_work() call. power: supply: ab8500_fg: drop duplicated 'is' in comment power: supply: ab8500: Drop external charger leftovers power: supply: ab8500: Add MAINTAINERS entry dt-bindings: power: reset: qcom,pshold: convert to dtschema power: supply: Fix typo in power_supply_check_supplies power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables power: reset: pwr-mlxbf: add missing include power: reset: at91-reset: add support for SAMA7G5 power: reset: at91-reset: add reset_controller_dev support power: reset: at91-reset: add at91_reset_data power: reset: at91-reset: document structures and enums dt-bindings: reset: add sama7g5 definitions dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings dt-bindings: reset: convert Atmel/Microchip reset controller to YAML power: reset: pwr-mlxbf: add BlueField SoC power control driver power: supply: ab8500: Exit maintenance if too low voltage power: supply: ab8500: Respect charge_restart_voltage_uv ...

Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-08-05T17:02:33Z

Pull more ARM SoC updates from Arnd Bergmann: "These updates came in after I had already tagged the branches, but they still seem appropriate for 6.0 and most of them were part of linux-next through other trees. - The reset controller tree adds one new driver for the TI TPS380x power management chip and a few minor changes in other drivers - Apple M1 now has a DT entry for the NVMe controller after the driver was merged, and has a new mailing list in the MAINTAINERS file. - Fixes for USB on the Socionext Uniphier platforms and the network controller on Intel Cyclone5" * tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC arm64: dts: apple: t8103: Add ANS2 NVMe nodes reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage" reset: tps380x: Add TPS380x device driver supprt dt-bindings: reset: Add TPS380x documentation dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings ARM: dts: add EMAC AXI settings for Cyclone5 reset: reset-simple should depends on HAS_IOMEM Revert "reset: microchip-sparx5: allow building as a module" reset: a10sr: allow building under COMPILE_TEST reset: allow building of reset simple driver if expert config selected reset: microchip-sparx5: allow building as a module arm64: dts: apple: Re-parent ANS2 power domains MAINTAINERS: add ARM/APPLE MACHINE mailing list

dt-bindings: reset: Add TPS380x documentation

2022-07-26T15:32:24Z

Add device-tree binding documentation for the tps380x reset driver. The binding uses enum to make it easy to add more devices from that family. Signed-off-by: Marco Felsch Reviewed-by: Krzysztof Kozlowski Signed-off-by: Philipp Zabel Link: https://lore.kernel.org/r/20220530092226.748644-1-m.felsch@pengutronix.de

dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings

2022-07-26T15:32:24Z

Add device tree binding document for RZ/G2UL USBPHY Control Device. RZ/G2UL USBPHY Control Device is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-usbphy-ctrl" will be used as a fallback. Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Acked-by: Krzysztof Kozlowski Signed-off-by: Philipp Zabel Link: https://lore.kernel.org/r/20220423134601.141975-1-biju.das.jz@bp.renesas.com

Merge branch 'nuvoton/newsoc' into arm/newsoc

2022-07-19T13:42:00Z

Merge the new SoC support from Tomer Maimon: "This patchset adds initial support for the Nuvoton Arbel NPCM8XX Board Management controller (BMC) SoC family. The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC. The NPCM8XX computing subsystem comprises a quadcore ARM Cortex A35 ARM-V8 architecture. This patchset adds minimal architecture and drivers such as: Clocksource, Clock, Reset, and WD. Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX. This patchset was tested on the Arbel NPCM8XX evaluation board." I'm leaving out the clk controller driver, which is still under review. * nuvoton/newsoc: arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string

dt-bindings: reset: npcm: Add support for NPCM8XX

2022-07-19T13:41:03Z

Add binding document and device tree binding constants for Nuvoton BMC NPCM8XX reset controller. Signed-off-by: Tomer Maimon Acked-by: Krzysztof Kozlowski Acked-by: Philipp Zabel Signed-off-by: Arnd Bergmann

dt-bindings: reset: npcm: add GCR syscon property

2022-07-19T13:41:02Z

Describe syscon property that handles general control registers (GCR) in Nuvoton BMC NPCM reset driver. Signed-off-by: Tomer Maimon Reviewed-by: Krzysztof Kozlowski Signed-off-by: Arnd Bergmann