linux-dev/Documentation/devicetree/bindings/rtc, branch master

dt-bindings: Remove 'Device Tree Bindings' from end of title:

2022-08-25T19:06:57Z

As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring

Merge tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2022-08-13T01:17:42Z

Pull RTC updates from Alexandre Belloni: "New drivers: - Microchip PolarFire - Nuvoton NCT3018Y - TI K3 RTC Subsystem: - Replace flush_scheduled_work() with flush_work() - Remove deprecated ida_simple_get()/ida_simple_remove() calls Drivers: - use simple i2c probe where possible - sun6i: add R329 support - zynqmp: add calibration support - vr41xx: remove unused driver" * tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: spear: set range max rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 rtc: zynqmp: initialize fract_tick rtc: Add NCT3018Y real time clock driver dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock dt-bindings: rtc: nxp,pcf85063: Convert to DT schema dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt' rtc: rx8025: fix 12/24 hour mode detection on RX-8035 rtc: cros-ec: Only warn once in .remove() about notifier_chain problems rtc: vr41xx: remove driver rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler() rtc: rv8803: fix missing unlock on error in rv8803_set_time() rtc: zynqmp: Add calibration set and get support rtc: zynqmp: Updated calibration value dt-bindings: rtc: zynqmp: Add clock information rtc: sun6i: add support for R329 RTC rtc: Directly use ida_alloc()/free() rtc: Introduce ti-k3-rtc dt-bindings: rtc: Add TI K3 RTC description dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section ...

Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-08-05T01:08:34Z

Pull devicetree updates from Rob Herring: "Bindings: - Add spi-peripheral-props.yaml references to various SPI device bindings - Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x, skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite bindings to DT schema format - New bindings for Arm virtual platforms display, Qualcomm IMEM memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and arm,cortex-a78ae - Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec, quanta, and densitron - Add missing MSI and IOMMU properties to host-generic-pci - Remove bindings for removed EFM32 platform - Remove old chosen.txt binding (replaced by schema) - Treewide add missing type information for properties - Treewide fixing of typos and its vs. it's in bindings. Its all good now. - Drop unnecessary quoting in power related schemas - Several LED binding updates which didn't get picked up - Move various bindings to proper directories DT core code: - Convert unittest GPIO related tests to use fwnode - Check ima-kexec-buffer against memory bounds - Print reserved-memory allocation/reservation failures as errors - Cleanup early_init_dt_reserve_memory_arch() - Simplify of_overlay_fdt_apply() tail" * tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits) dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml dt-bindings: power: supply: drop quotes when not needed dt-bindings: power: reset: drop quotes when not needed dt-bindings: power: drop quotes when not needed dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties of/fdt: declared return type does not match actual return type devicetree/bindings: correct possessive "its" typos dt-bindings: net: convert emac_rockchip.txt to YAML dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory dt-bindings: eeprom: at25: use spi-peripheral-props.yaml dt-bindings: display: use spi-peripheral-props.yaml dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema dt-bindings: power: reset: qcom,pon: use absolute path to other schema dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts' dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat' dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode' of/fdt: Clean up early_init_dt_reserve_memory_arch() dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high' dt-bindings: rtc: Add EM Microelectronic EM3027 bindings dt-bindings: rtc: ds1307: Convert to json-schema ...

dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock

2022-07-26T15:06:52Z

Document devicetree bindings for the Nuvoton NCT3018Y Real Time Clock. Reviewed-by: Rob Herring Signed-off-by: Mia Lin Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20220713090647.8028-2-mimi05633@gmail.com

dt-bindings: rtc: nxp,pcf85063: Convert to DT schema

2022-07-26T14:59:57Z

Convert the NXP PCF85063 RTC binding to DT schema format. Add 'interrupts' and 'wakeup-source' as this device has an interrupt which was not documented, but is in use. 'clock-output-names' and '#clock-cells' are added as well, those were probably missed when adding clkout support in commit 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Signed-off-by: Alexander Stein Reviewed-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20220725071919.25342-1-alexander.stein@ew.tq-group.com

dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'

2022-07-26T14:57:17Z

'trickle-voltage-millivolt' is missing a type definition. '-millivolt' is not a standard unit (should be '-microvolt'). As the property is already in use, add a type reference. Signed-off-by: Rob Herring Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20220719215143.1877566-1-robh@kernel.org

dt-bindings: rtc: zynqmp: Add clock information

2022-07-26T09:21:50Z

Added clock information and deprecated calibration support. Signed-off-by: Srinivas Neeli Reviewed-by: Rob Herring Acked-by: Krzysztof Kozlowski Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20220626070817.3780977-1-srinivas.neeli@xilinx.com

dt-bindings: rtc: Add EM Microelectronic EM3027 bindings

2022-07-21T21:34:02Z

Document the bindings for the EM Microelectronic EM3027 RTC. Signed-off-by: Thierry Reding Reviewed-by: Rob Herring Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220617114420.1398259-2-thierry.reding@gmail.com

dt-bindings: rtc: ds1307: Convert to json-schema

2022-07-21T21:34:02Z

Convert the DS1307 (and compatible) RTC bindings from the free-form text format to json-schema. Signed-off-by: Thierry Reding Reviewed-by: Rob Herring Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220617114420.1398259-1-thierry.reding@gmail.com

dt-bindings: rtc: Add fsl,scu-rtc yaml file

2022-07-08T08:35:21Z

In order to replace the fsl,scu txt file from bindings/arm/freescale, we need to split it between the right subsystems. This patch documents separately the 'rtc' child node of the SCU main node. Signed-off-by: Abel Vesa Signed-off-by: Viorel Suman Reviewed-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo