linux-dev/Documentation/devicetree/bindings/soc/fsl, branch master

dt-bindings: fsl: convert fsl,layerscape-scfg to YAML

2022-04-28T22:45:51Z

Convert the fsl,layerscape-scfg binding to the new YAML format. In the device trees, the device node always have a "syscon" compatible, which wasn't mentioned in the previous binding. Also added, compared to the original binding, is the interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi as well as the litte-endian and big-endian properties. Signed-off-by: Michael Walle Reviewed-by: Krzysztof Kozlowski Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220427075338.1156449-5-michael@walle.cc

dt-bindings: fsl: convert fsl,layerscape-dcfg to YAML

2022-04-25T20:30:23Z

Convert the fsl,layerscape-dcfg binding to the new YAML format. In the device trees, the device node always have a "syscon" compatible, which wasn't mentioned in the previous binding. One thing added here, compared to the original binding is the clock controller subnode of the LS1028A SoC and its "simple-mfd" compatible as used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the little-endian and big-endian properties. Signed-off-by: Michael Walle Reviewed-by: Krzysztof Kozlowski Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220425140433.33936-1-michael@walle.cc

dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition

2019-11-12T21:26:05Z

By default, QorIQ SoC's RCPM register block is Big Endian. But there are some exceptions, such as LS1088A and LS2088A, are Little Endian. So add this optional property to help identify them. Actually LS2021A and other Layerscapes won't totally follow Chassis 2.1, so separate them from powerpc SoC. Signed-off-by: Ran Wang Reviewed-by: Rob Herring Signed-off-by: Li Yang

dt-bindings: soc: fsl: qe: document new fsl,qe-snums binding

2019-06-05T19:26:29Z

Reading table 4-30, and its footnotes, of the QUICC Engine Block Reference Manual shows that the set of snum _values_ is not necessarily just a function of the _number_ of snums, as given in the fsl,qe-num-snums property. As an alternative, to make it easier to add support for other variants of the QUICC engine IP, this introduces a new binding fsl,qe-snums, which automatically encodes both the number of snums and the actual values to use. Signed-off-by: Rasmus Villemoes Reviewed-by: Rob Herring Signed-off-by: Li Yang

net/wan/fsl_ucc_hdlc: hmask

2018-09-04T05:14:41Z

Ability to set hmask in the device-tree, which can be used to change address filtering of packets. Signed-off-by: David Gounaris Signed-off-by: David S. Miller

dt-bindings: remove 'interrupt-parent' from bindings

2018-07-25T20:09:39Z

'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-11-17T00:05:01Z

Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..

dt-bindings: Remove leading zeros from bindings notation

2017-11-09T23:05:05Z

Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi Signed-off-by: Rob Herring

dt-bindings: soc/fsl: Update reserved memory binding for QBMan

2017-09-22T18:33:07Z

Updates the QMan and BMan device tree bindings for reserved memory nodes. This makes the reserved memory allocation compatible with the shared-dma-pool usage. Signed-off-by: Roy Pledge Acked-by: Rob Herring Signed-off-by: Li Yang

powerpc/8xx: Adding support of IRQ in MPC8xx GPIO

2017-05-03T03:35:00Z

This patch allows the use of IRQ to notify the change of GPIO status on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs in the Device Tree. Ex: CPM1_PIO_C: gpio-controller@960 { #gpio-cells = <2>; compatible = "fsl,cpm1-pario-bank-c"; reg = <0x960 0x10>; fsl,cpm1-gpio-irq-mask = <0x0fff>; interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; interrupt-parent = <&CPM_PIC>; gpio-controller; }; The property 'fsl,cpm1-gpio-irq-mask' defines which of the 16 GPIOs have the associated interrupts defined in the 'interrupts' property. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood