linux-dev/Documentation/devicetree/bindings/soc/qcom, branch master

Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-10-10T20:13:51Z

Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...

Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-10-06T18:04:57Z

Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...

dt-bindings: soc: qcom: apr: add missing properties

2022-09-14T21:12:38Z

The APR bindings were not describing all properties already used in DTS: 1. Add qcom,glink-channels, qcom,smd-channels and qcom,intents (widely used). 2. Add power-domains for MSM8996. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Srinivas Kandagatla Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220910091428.50418-16-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown

ASoC: dt-bindings: qcom,q6adm: convert to dtschema

2022-09-14T21:12:34Z

Convert Qualcomm Audio Device Manager (Q6ADM) bindings to DT schema. The original bindings documented: 1. APR service node with compatibles: "qcom,q6adm" and "qcom,q6adm-v.", 2. Routing child node with compatible "qcom,q6adm-routing". The conversion entirely drops (1) because the compatible is already documented in bindings/soc/qcom/qcom,apr.yaml. The "qcom,q6adm-v." on the other hand is not used at all - neither in existing DTS, nor in downstream sources - so versions seems to be fully auto-detectable. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220910091428.50418-12-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown

ASoC: dt-bindings: qcom,q6asm: convert to dtschema

2022-09-14T21:12:33Z

Convert Qualcomm Audio Stream Manager (Q6ASM) bindings to DT schema. The original bindings documented: 1. APR service node with compatibles: "qcom,q6asm" and "qcom,q6asm-v.", 2. actual DAIs child node with compatible "qcom,q6asm-dais". The conversion entirely drops (1) because the compatible is already documented in bindings/soc/qcom/qcom,apr.yaml. The "qcom,q6asm-v." on the other hand is not used at all - neither in existing DTS, nor in downstream sources - so versions seems to be fully auto-detectable. Another change done in conversion is adding "iommus" property, which is already used in DTS and Linux driver. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220910091428.50418-11-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown

dt-bindings: soc: qcom: apr: correct service children

2022-09-14T21:11:52Z

The APR bindings were not describing properly children nodes for DAIs. None of the DTSes use unit addresses for the children, so correct the nodes and reference their schema: clock-controller, dais and routing. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Srinivas Kandagatla Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220910091428.50418-10-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown

dt-bindings: remoteproc: qcom,smd-edge: define children

2022-09-09T16:23:31Z

SMD edge contains subnodes representing devices related to the remote processor. With limietd number of remote processors, there is a limited set of such devices. List all of them in smd-edge bindings so schema can strictly check for subnodes. Additional benefit is requirement of "qcom,smd-channels" for such subnodes, because their schema cannot enforce it (few devices like APR or FastRPC can be part of either SMD or GLINK edge). Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220909125403.803158-8-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring

dt-bindings: soc: qcom: smd: restrict child name to smd-edge

2022-09-09T16:23:31Z

Child node of SMD must be either smd-edge or rpm, so the pattern can be narrowed. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220909125403.803158-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring

dt-bindings: soc: qcom: stats: Document SDM845 compatible

2022-08-29T21:38:52Z

SDM845 is a special case compared to the other platforms that use RPMh stats, since it only has 2 stats (aosd and cxsd), while the others have a 3rd one (ddr). So in order for the driver to use the dedicated stats config, we added the SDM845 dedicated compatible, which we document here. Signed-off-by: Abel Vesa Acked-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220812101240.1869605-4-abel.vesa@linaro.org

Merge tag 'rpmsg-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

2022-08-10T18:28:14Z

Pull rpmsg fixes from Bjorn Andersson: "This fixes schema validation warnings in the Devicetree bindings for SMD and SMD RPM" * tag 'rpmsg-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: soc: qcom: smd-rpm: extend example dt-bindings: soc: qcom: smd: reference SMD edge schema