linux-dev/Documentation/hwmon/ntc_thermistor, branch master

docs: hwmon: Add an index file and rename docs to *.rst

2019-04-17T17:37:23Z

Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck

docs: hwmon: convert remaining files to ReST format

2019-04-17T17:36:05Z

Convert all other hwmon files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Add support for ncpXXxh103

2016-03-05T14:25:34Z

This patch adds support for the Murata NCP15XH103 thermistor series. Signed-off-by: Joseph McNally Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Add support for ncpXXwf104

2015-06-01T05:58:36Z

This patch adds support for the ntc thermistor NCPXXWF104 series. Cc: Jean Delvare Cc: Guenter Roeck Signed-off-by: Beomho Seo Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS

2014-08-04T14:01:35Z

This patch adds support for the ntc thermistor B57330V2103 from EPCOS. Signed-off-by: Johannes Pointner Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Use the manufacturer name properly

2014-06-25T14:09:13Z

Murata Manufacturing Co., Ltd is the vendor for NTC (Negative Temperature coefficient) based Thermistors. But, the driver extensively uses "NTC" as the vendor name. This patch corrects the vendor name also updates the compatibility strings according to the vendor-prefix.txt Note: Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated. Signed-off-by: Naveen Krishna Chatradhi Reviewed-by: Javier Martinez Canillas Signed-off-by: Guenter Roeck

hwmon: Driver for NTC Thermistors

2011-07-28T07:17:33Z

Add support for NTC Thermistor series. In this release, the following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473, and NCP15WL333. This driver is based on the datasheet of MURATA. The driver in the patch does conversion from the raw ADC value (either voltage or resistence) to temperature. In order to use voltage values as input, the circuit schematics should be provided with the platform data. A compensation table for each type of thermistor is provided for the conversion. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: KyungMin Park Reviewed-by: Shubhrajyoti D Signed-off-by: Guenter Roeck