linux-dev/Documentation/networking/devlink, branch linus/master

Revert "Merge branch 'mlxsw-line-card-model'"

2022-05-05T22:47:23Z

This reverts commit 5e927a9f4b9f29d78a7c7d66ea717bb5c8bbad8e, reversing changes made to cfc1d91a7d78cf9de25b043d81efcc16966d55b3. The discussion is still ongoing so let's remove the uAPI until the discussion settles. Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/ Reviewed-by: Ido Schimmel Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

mlxsw: core_linecards: Expose device FW version over device info

2022-04-25T09:42:29Z

Extend MDDQ to obtain FW version of line card device and implement device_info_get() op to fill up the info with that. Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

mlxsw: core_linecards: Expose HW revision and INI version

2022-04-25T09:42:28Z

Implement info_get() to expose HW revision of a linecard and loaded INI version. Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

devlink: introduce line card device info infrastructure

2022-04-25T09:42:28Z

Extend the line card info message with information (e.g., FW version) about devices found on the line card. Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 devices: device 0 versions: running: fw 19.2010.1310 device 1 versions: running: fw 19.2010.1310 device 2 versions: running: fw 19.2010.1310 device 3 versions: running: fw 19.2010.1310 Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

devlink: introduce line card info get message

2022-04-25T09:42:28Z

Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

devlink: implement line card active state

2022-04-18T10:00:18Z

Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

devlink: implement line card provisioning

2022-04-18T10:00:18Z

In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

devlink: expose instance locking and add locked port registering

2022-03-16T19:56:31Z

It should be familiar and beneficial to expose devlink instance lock to the drivers. This way drivers can block devlink from calling them during critical sections without breakneck locking. Add port helpers, port splitting callbacks will be the first target. Use 'devl_' prefix for "explicitly locked" API. Initial RFC used '__devlink' but that's too much typing. devl_lock_is_held() is not defined without lockdep, which is the same behavior as lockdep_is_held() itself. Reviewed-by: Leon Romanovsky Signed-off-by: Jakub Kicinski

Documentation: devlink: mlx5.rst: Fix htmldoc build warning

2022-01-07T00:22:55Z

Fix the following build warning: Documentation/networking/devlink/mlx5.rst:13: WARNING: Error parsing content block for the "list-table" directive: +uniform two-level bullet list expected, but row 2 does not contain the same number of items as row 1 (2 vs 3). ... Add the missing item in the first row. Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param") Reported-by: Stephen Rothwell Signed-off-by: Saeed Mahameed

net/mlx5: Let user configure max_macs generic param

2021-12-22T03:08:55Z

Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory Reviewed-by: Moshe Shemesh Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed