linux-dev/arch/arm/boot/dts/Makefile, branch linus/master

Merge tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late

2022-05-30T08:59:42Z

ASPEED device tree updates for 5.19 - New machine: * Nuvia's DC-SCM BMC - Enable AST2600 GFX, the BMC-driven graphics device - Add a bunch of devices for the AST2600 EVB - Updates to the AST2600 Bletchley machine - Backwards compatible changes to support the new spi-mem based SPI NOR driver * tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: ast2600-evb: Enable GFX device ARM: dts: aspeed: Add GFX node to AST2600 ARM: dts: aspeed: ast2600-evb: Enable virtual hub ARM: dts: aspeed: ast2600-evb: Enable video engine ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO ARM: dts: aspeed: Add Nuvia DC-SCM BMC ARM: dts: aspeed: bletchley: add sample averaging for ADM1278 ARM: dts: aspeed: bletchley: add eeprom node on each sled ARM: dts: aspeed: bletchley: add pca9536 node on each sled ARM: dts: aspeed: bletchley: update gpio0 line names ARM: dts: aspeed: bletchley: Enable mdio0 bus ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc ARM: dts: aspeed: bletchley: enable ehci0 device node ARM: dts: aspeed: Add USB2.0 device controller node ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes ARM: dts: aspeed: Enable Dual SPI RX transfers ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1 Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.com Signed-off-by: Arnd Bergmann

Merge branch 'hpe/gxp-soc' into arm/late

2022-05-27T13:55:37Z

Patch series from Nick Hawkins: "The GXP is the HPE BMC SoC that is used in the majority of HPE current generation servers. Traditionally the asic will last multiple generations of server before being replaced. Info about SoC: HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC features at HPE. It supports ARMv7 architecture based on the Cortex A9 core. It is capable of using an AXI bus to which a memory controller is attached. It has multiple SPI interfaces to connect boot flash and BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple i2c engines to drive connectivity with a host infrastructure. The initial patches enable the watchdog and timer enabling the host to be able to boot." * hpe/gxp-soc: MAINTAINERS: Introduce HPE GXP Architecture ARM: dts: Introduce HPE GXP Device tree dt-bindings: arm: hpe: add GXP Support dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog clocksource/drivers/timer-gxp: Add HPE GXP Timer watchdog: hpe-wdt: Introduce HPE GXP Watchdog ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH ARM: hpe: Introduce the HPE GXP architecture Signed-off-by: Arnd Bergmann

ARM: dts: aspeed: Add Nuvia DC-SCM BMC

2022-05-19T07:38:10Z

Add initial version of device tree for Nuvia DC-SCM BMC which is equipped with Aspeed AST2600 BMC SoC. Signed-off-by: Graeme Gregory Signed-off-by: Jae Hyun Yoo Link: https://lore.kernel.org/r/20220325190247.468079-1-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley

ARM: dts: Introduce HPE GXP Device tree

2022-05-18T12:05:54Z

The HPE SoC is new to linux. A basic device tree layout with minimum required for linux to boot including a timer and watchdog support has been created. The dts file is empty at this point but will be updated in subsequent updates as board specific features are enabled. Signed-off-by: Nick Hawkins Signed-off-by: Arnd Bergmann Acked-by: Krzysztof Kozlowski

Merge tag 'at91-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

2022-05-13T19:52:10Z

AT91 & LAN966 DT #1 for 5.19: - at91: DT compliance updates to gic and dataflash nodes - lan966: addition to many basic nodes for various peripherals - lan966: Kontron KSwitch D10: support for this new board and its network switch * tag 'at91-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash Link: https://lore.kernel.org/r/20220513162338.87717-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann

ARM: dts: lan966x: add basic Kontron KSwitch D10 support

2022-05-13T13:41:51Z

Add basic support for the Kontron KSwitch D10 MMT. It comes in two variants: "6G-2GS" which features 6 Gigabit copper ports and two SFP cages and "8G" which features 6 Gigbabit copper ports (where two are 2.5G capable). For now the following is supported and working: - Kernel console - SFP cages - SPI - SGPIO - Watchdog Signed-off-by: Michael Walle Reviewed-by: Claudiu Beznea Tested-by: Horatiu Vultur [claudiu.beznea: fixed conflict on Makefile] Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220502224127.2604333-8-michael@walle.cc Signed-off-by: Nicolas Ferre

Merge tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

2022-05-09T21:43:10Z

i.MX ARM device tree update for 5.19: - New board support: PHYTEC phyGATE-Tauri-S, TQ-Systems MBa6UL, LS1021A IoT board, Toradex Iris and Aster carrier, i.MX7D SMEGW01, i.MXRT1050 EVK, Bosch ACC board. - A series from Alexander Stein to update i.MX51 based digi-connectcore board, regarding to DMA of UART devices, PMIC voltages, USB vbus-supply and usbphy. - A series of changes from David Jander and Oleksij Rempel to remove prototype specific deprecated code not used in production from i.MX6Q/DL Vicut1 board, and unify Vicut1 and Victgo variants to reduce maintaining overhead. - Quite some changes from different people to update imx6ull-colibri board on various aspects, touchscreen, device tree overlays, NAND BCH geometry, GPIO line names, FEC phy-supply, etc. - A couple of changes from Fabio Estevam to switch imx6dl-plybas and imx6ul-kontron-n6x1x-s to use standard 'uart-has-rtscts' property. - A couple of patches from Li Yang to update IFC device compatible and node name for LayerScape SoCs. - Disable USB host to work around boot issue on imx6qdl-udoo board. - A series from Max Krummenacher to update Colibri i.MX6DL device trees, drop dedicated v1.1 DT, disable add-on accessories, cleanups, etc. - Various random and small updates on i.MX28 and i.MX6 boards. * tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits) ARM: dts: imx6ull-colibri: improve pinctrl node names ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi ARM: dts: imx6ull-colibri: add/update some comments ARM: dts: imx6ull-colibri: fix nand bch geometry ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards ARM: dts: imx6ull-colibri: add gpio-line-names ARM: dts: imx6ull-colibri: update device trees to support overlays ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling ARM: dts: imx6ull-colibri: add touchscreen device nodes ARM: dts: imx6ull-colibri: add phy-supply to fec ARM: dts: imx6ull-colibri: change touch i2c parameters ARM: dts: imx6ull-colibri: use pull-down for adc pins ARM: dts: Add bosch acc board ARM: dts: imx: Add i.MXRT1050-EVK support ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues ARM: dts: imx27: use new 'dma-channels' property ARM: dts: imx6qdl-phytec: Add LED labels ARM: dts: ls1021a: reduce the interrupt-map-mask ... Link: https://lore.kernel.org/r/20220508033843.2773685-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

2022-05-09T21:21:54Z

Qualcomm ARM DT updates for v5.19 This contains a long overdue overhaul of the MSM8974 DeviceTrees, aligning the style, structure and naming with what we've learned since the introduction of this platform. On top of this the Sony Rhine platform gained I2C masters, NFC and pstore support and the Fairphone 2 gained touchscreen support. For the new SDX65 platform reserved-memory nodes, rpmpd, SPMI, CPU clocks, SDHCI controller, SMMU and TCSR mutex was added. As was the initial DeviceTree for the related PMX65 PMIC. MSM8226 gained VADC and RTC support and support for the ASUS ZenWatch 2 was added. * tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits) ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocs ARM: dts: qcom: msm8974-FP2: Configure charger ARM: dts: qcom: msm8974-FP2: Add support for touchscreen ARM: dts: qcom: sdx55: Remove ipa interconnect node ARM: dts: qcom: msm8974: Add missing license headers ARM: dts: qcom: msm8974-FP2: Add mmc* aliases ARM: dts: qcom: msm8974-FP2: We're msm8974pro ARM: dts: qcom-msm8974*: Remove unnecessary include ARM: dts: qcom-msm8974-rhine: Add pstore node ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts ARM: dts: qcom-msm8974*: Clean up old GPIO declarations ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI ARM: dts: qcom-msm8974*: Enable IMEM unconditionally ARM: dts: qcom-msm8974: Sort and clean up nodes ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames ARM: dts: qcom-msm8974pro: Use &labels ARM: dts: qcom-msm8974-castor: Use &labels ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs ARM: dts: qcom-msm8974-klte: Use &labels ... Link: https://lore.kernel.org/r/20220509172125.313259-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann

ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards

2022-05-07T01:53:28Z

Add support for Toradex Aster, small form-factor Colibri Arm Computer Module family carrier board. Aster Device Trees: - imx6ull-colibri-aster.dtb - imx6ull-colibri-emmc-aster.dtb - imx6ull-colibri-wifi-aster.dtb Signed-off-by: Denys Drozdov Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo

ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards

2022-05-07T01:53:25Z

Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm Computer Module family carrier boards. Iris Device Trees: - imx6ull-colibri-iris.dtb - imx6ull-colibri-emmc-iris.dtb - imx6ull-colibri-wifi-iris.dtb Iris-V2 Device Trees: - imx6ull-colibri-iris-v2.dtb - imx6ull-colibri-emmc-iris-v2.dtb - imx6ull-colibri-wifi-iris-v2.dtb Signed-off-by: Denys Drozdov Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo