linux-dev/arch/arm/mach-ep93xx, branch master

Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-10-07T23:36:24Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...

termios: get rid of non-UAPI asm/termios.h

2022-09-09T08:44:35Z

All non-UAPI asm/termios.h consist of include of UAPI counterpart and, possibly, include of linux/uaccess.h The latter can't be simply removed, even though nothing in linux/termios.h doesn't depend upon it anymore - there are several places that rely upon that indirect chain of includes to pull linux/uaccess.h. So the include needs to be lifted out of there - we lift into tty_driver.h, serdev.h and places that pull asm/termios.h, but none of * linux/uaccess.h (obvious) * net/sock.h (pulls uaccess.h) * linux/{tty,tty_driver,serdev}.h (tty.h pulls tty_driver.h) That leaves us just with the include of UAPI asm/termios.h, which is what will resolve to if we simply remove non-UAPI header. Signed-off-by: Al Viro Link: https://lore.kernel.org/r/YxDnKvYCHn/ogBUv@ZenIV Signed-off-by: Greg Kroah-Hartman

ARM: remove obsolete Makefile.boot infrastructure

2022-08-18T14:44:59Z

There are a number of old Makefile.boot files that remain from the multiplatform conversion, and three that are still in use. These provide the "ZRELADDR", "PARAMS_PHYS" and "INITRD_PHYS" values that are platform specific. It turns out that we can generally just derive this from information that is available elsewhere: - ZRELADDR is normally detected at runtime with the CONFIG_AUTO_ZRELADDR flag, but also needed to be passed to for 'make uImage'. In a multiplatform kernel, one always has to pass this as the $(LOADADDR) variable, but in the StrongARM kernels we can derive it from the sum of $(CONFIG_PHYS_OFFSET) and $(TEXT_OFFSET) that are already known. - PARAMS_PHYS and INITRD_PHYS are only used for bootpImage, which in turn is only used for the pre-ATAGS 'param_struct' based boot interface on StrongARM based machines with old boot loaders. They can both be derived from CONFIG_PHYS_OFFSET and a machine specific offset for the initrd, so all of the logic for these can be part of arch/arm/boot/bootp/Makefile. Signed-off-by: Arnd Bergmann

ARM: ep93xx: mark most board files as unused

2022-07-22T11:11:21Z

Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin Acked-by: Alexander Sverdlin Cc: Hartley Sweeten Cc: Lukasz Majewski Signed-off-by: Arnd Bergmann

ARM: add ATAGS dependencies to non-DT platforms

2022-07-22T11:11:21Z

There are a total of eight platforms that only suppor ATAGS based boot with board files but no devicetree booting. For dove, the DT support is part of the mvebu platform, which shares driver but no code in arch/arm. Most of these will never get converted to DT, and the majority of the board files appear to be entirely unused already. There are still known users on a few machines, and there may be interest in converting some omap1, ep93xx or footbridge machines over in the future. For the moment, just add a Kconfig dependency to hide these platforms completely when CONFIG_ATAGS is disabled, and reorder the priority of the options: Rather than offering to turn ATAGS off for platforms that have DT support, make it a top-level setting that determines which platforms are visible. The s3c24xx platform supports one machine with DT support, but it cannot be built without also including ATAGS support, and the entire platform is scheduled for removal, so leaving the entire platform behind a dependency seems good enough. All defconfig files should keep working, as the option remains default enabled. Signed-off-by: Arnd Bergmann

ARM: ep93xx: Make ts72xx_register_flash() static

2022-05-27T14:00:58Z

... and fix the warning/error: arch/arm/mach-ep93xx/ts72xx.c:154:13: error: no previous prototype for function 'ts72xx_register_flash' [-Werror,-Wmissing-prototypes] void __init ts72xx_register_flash(struct mtd_partition *parts, int n, ^ arch/arm/mach-ep93xx/ts72xx.c:154:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void __init ts72xx_register_flash(struct mtd_partition *parts, int n, ^ static Reported-by: kernel test robot Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/lkml/202202140141.HRZ3WZwi-lkp@intel.com/T/ Link: https://lore.kernel.org/r/20220523065616.325052-1-alexander.sverdlin@gmail.com' Signed-off-by: Arnd Bergmann

ep93xx: clock: Do not return the address of the freed memory

2022-05-27T13:55:44Z

Avoid return freed memory addresses,Modified to the actual error return value of clk_register(). Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK") Signed-off-by: Genjian Zhang Acked-by: Alexander Sverdlin Signed-off-by: Arnd Bergmann

Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-05-26T17:43:09Z

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...

ARM: rework endianess selection

2022-04-08T15:20:54Z

Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann

ep93xx: clock: Don't use plain integer as NULL pointer

2022-04-07T11:56:49Z

Fix sparse warning: arch/arm/mach-ep93xx/clock.c:210:35: sparse: sparse: Using plain integer as NULL pointer Reported-by: kernel test robot Signed-off-by: Alexander Sverdlin Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/TLFJ6D7WGMDJSQ6XK7UZE4XR2PLRZJSV/ Signed-off-by: Arnd Bergmann