linux-dev/arch/arm/mach-nomadik, branch master

Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-05-26T17:43:09Z

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...

arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK

2022-05-03T12:44:21Z

Commit 85b6fcadcf66 ("clocksource/drivers/ux500: Drop Ux500 custom SCHED_CLOCK") removes a sched_clock workaround and its corresponding config CLKSRC_NOMADIK_MTU_SCHED_CLOCK. Since then, selecting CLKSRC_NOMADIK_MTU_SCHED_CLOCK in ./arch/arm/mach-nomadik/Kconfig has no effect and ./scripts/checkkconfigsymbols.py warns: CLKSRC_NOMADIK_MTU_SCHED_CLOCK Referencing files: arch/arm/mach-nomadik/Kconfig Simply drop selecting the obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK. Signed-off-by: Lukas Bulwahn Signed-off-by: Linus Walleij Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220410145623.2620380-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann

ARM: rework endianess selection

2022-04-08T15:20:54Z

Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ARM: nomadik: select MFD_SYSCON

2016-09-09T21:15:50Z

Since the Power Management Unit is using syscon to access a set of necessary hardware muxing, let's select MFD_SYSCON for the Nomadik subarchitecture. Signed-off-by: Linus Walleij

ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB

2016-06-03T19:18:13Z

This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson

ARM: nomadik: move l2x0 setup to device tree

2015-08-11T13:29:59Z

The cache setup magic value in the Nomadik machine is plain wrong, the correct settings can be done using device tree in accordance with the settings from ST's own port. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson

ARM: nomadik: move hog code to use DT hogs

2015-08-11T13:29:57Z

Instead of introducing a board-specific DT node for biasing the MMC/SD and SATA ports, use the new device tree hogs. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson

ARM: nomadik: device tree for NHK15 board

2014-10-31T20:44:32Z

This adds a device tree for the Nomadik NHK15 development kit board. Signed-off-by: Linus Walleij