linux-dev/arch/arm/mach-nspire, branch master

ARM: Kconfig: clean up platform selection

2022-08-18T14:44:59Z

The top-level platform selection is mostly meaningless these days after almost everything is sorted below the CONFIG_ARCH_MULTIPLATFORM, with the only exception being the 20+ year old StrongARM based machines. Make this more consistent by removing the entire choice statement and moving the StrongARM specific options into regular platform specific Kconfig files. The three platforms (footbridge, rpc and sa1100) are still mutually exclusive and cannot coexist with other ARMv4/v5 machines, but since there are only three of them and we will not add more, this can be expressed using Kconfig 'depends on' statements. Signed-off-by: Arnd Bergmann

ARM: rework endianess selection

2022-04-08T15:20:54Z

Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann

ARM: remove support for NOMMU ARMv4/v5

2022-03-17T08:13:13Z

It is possible to build MMU-less kernels for Cortex-M base microcrontrollers as well as a couple of older platforms that have not been converted to CONFIG_ARCH_MULTIPLATFORM, specifically ep93xx, footbridge, dove, sa1100 and s3c24xx. It seems unlikely that anybody has tested those configurations in recent years, as even building them is frequently broken. A patch I submitted caused another build time regression in this configuration. I sent a patch for that, but it seems better to also remove the option entirely, leaving ARMv7-M as the only supported Arm NOMMU target for simplicity. A couple of platforms have dependencies on CONFIG_MMU, those can all be removed now. Notably, mach-integrator tries to support MMU-less CPU cores, but those have not actually been selectable for a long time. This addresses several build failures in randconfig builds that have accumulated over the years. Cc: Vladimir Murzin Cc: Russell King Acked-by: Geert Uytterhoeven Reviewed-by: Linus Walleij Reviewed by: Ard Biesheuvel Signed-off-by: Arnd Bergmann

ARM: mach-nspire: Kill off CLCD auxdata

2019-08-13T13:48:23Z

After transitioning the CLCD to use DRM we can now kill off the final piece of auxdata on the NSPIRE. Link: https://lore.kernel.org/r/20190810075023.7327-1-linus.walleij@linaro.org Cc: Daniel Tang Cc: Fabian Vogt Tested-by: Fabian Vogt Acked-by: Sam Ravnborg Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ARM: nspire: Remove unneeded nspire_map_io()

2018-03-07T15:07:35Z

nspire_map_io() just calls debug_ll_io_init(). If machine_desc.map_io is not set, devicemaps_init() in the common ARM code will call debug_ll_io_init(), so nspire_map_io() and the initialization of .map_io can be removed. Signed-off-by: Geert Uytterhoeven Reviewed-by: Vladimir Murzin Signed-off-by: Arnd Bergmann

Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2016-07-30T18:32:01Z

Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...

clocksource/drivers/nspire: Add the COMPILE_TEST option

2016-06-28T08:22:14Z

Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_NSPIRE_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano

arm: use of_platform_default_populate() to populate

2016-06-23T20:00:39Z

Use helper of_platform_default_populate() in linux/of_platform when possible, instead of calling of_platform_populate() with the default match table. Acked-by: Viresh Kumar Acked-by: Nicolas Ferre Cc: Nicolas Ferre Cc: Krzysztof Halasa Cc: Sekhar Nori Cc: Shawn Guo Cc: Russell King Cc: Roland Stigge Cc: Jason Cooper Cc: Ray Jui Cc: Viresh Kumar Cc: Stephen Warren Cc: Rob Herring Cc: Michal Simek Signed-off-by: Kefeng Wang Signed-off-by: Rob Herring