linux-dev/arch/arm/mach-shmobile/Makefile, branch master

ARM: shmobile: R-Mobile: Move pm-rmobile to drivers/soc/renesas/

2018-11-30T10:29:11Z

The pm-rmobile driver is really a driver for the System Controller (SYSC) found in R-Mobile SoCs. An equivalent driver for R-Car SoCs is already located under drivers/soc/renesas/. Hence move the pm-rmobile driver from arch/arm/mach-shmobile/ to drivers/soc/renesas/, and rename it to rmobile-sysc. Enable compile-testing on non-ARM and non-R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: Add basic RZ/A2 SoC support

2018-08-27T13:06:42Z

Add the RZ/A2 SoC to the Renesas SoC collection. Signed-off-by: Chris Brandt Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: rcar-gen2: Stop compiling headsmp-apmu on !SMP

2018-06-27T15:08:52Z

As of commit cad160ed0a94927e ("ARM: shmobile: Convert file to use cntvoff"), there's no non-SMP code left in headsmp-apmu.S. Hence build the file for SMP only, and drop the no longer needed check for CONFIG_SMP inside the file. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: r8a7779: Remove explicit SYSC config and init

2018-06-18T10:00:28Z

If the R-Car H1 system controller is described in DT, the rcar-sysc driver configures SYSCIER and SYSCIMR based on the SoC-specific power area definitions in r8a7779-sysc. The platform code still passed this information to the rcar-sysc driver, for compatibility with old DTBs predating commit b2df3aa487395a1b ("ARM: dts: r8a7779: Add SYSC PM Domains") in v4.7. The time has come to drop backwards compatibility, and delegate everything to the DT enabled rcar-sysc driver. After stopping powering down secondary CPUs during early boot, there is no longer a need to force an early initialization of the rcar-sysc driver. It will be initialized in time for secondary CPU bringup by its early_initcall(). Hence all explicit SYSC configuration and initialization can be removed from the R-Car H1 platform code. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: r8a7791: Use common R-Car Gen2 machine definition

2018-06-18T10:00:21Z

Now r8a7791 no longer needs the SMP initialization fallback, it can use the common R-Car Gen2 machine definition, and the r8a7791-specific one can be removed. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: r8a7791: Remove legacy SMP fallback code

2018-06-18T10:00:21Z

As of commit f89a51700d7ae0ef ("ARM: shmobile: r8a7791: Prioritize DT APMU support") in v4.8, non-DT enablement of SMP was left as a fallback for backwards compatibility with old DTBs. The time has come to drop backwards compatibility, hence remove the fallback code. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: r8a7790: Use common R-Car Gen2 machine definition

2018-06-18T10:00:21Z

Now r8a7790 no longer needs the SMP initialization fallback, it can use the common R-Car Gen2 machine definition, and the r8a7790-specific one can be removed. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

ARM: shmobile: r8a7790: Remove legacy SMP fallback code

2018-06-18T10:00:21Z

As of commit f5d70b9cee2282ec ("ARM: shmobile: r8a7790: Prioritize DT APMU support") in v4.8, non-DT enablement of SMP was left as a fallback for backwards compatibility with old DTBs. The time has come to drop backwards compatibility, hence remove the fallback code. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-11-16T22:05:12Z

Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman