linux-dev/arch/arm/mach-socfpga, branch master

ARM: rework endianess selection

2022-04-08T15:20:54Z

Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann

ARM: socfpga: fix missing RESET_CONTROLLER

2022-02-07T09:54:42Z

The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA") uses reset controller, so it should select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER is not enough because it affects only default choice still allowing a non-buildable configuration: /usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq': arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init' Reported-by: kernel test robot Cc: Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen

ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE

2021-11-18T22:19:40Z

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing. This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above. Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by: Kees Cook Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Dinh Nguyen

ARM: socfpga: drop ARCH_SOCFPGA

2021-03-23T16:03:36Z

Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. After conversion of all drivers to use the new ARCH_INTEL_SOCFPGA, the remaining ARM option can be removed. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen

ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA

2021-03-23T16:03:35Z

Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dinh Nguyen

ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()

2020-07-28T18:57:36Z

if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 44fd8c7d4005 ("ARM: socfpga: support suspend to ram") Signed-off-by: Yu Kuai Signed-off-by: Dinh Nguyen

ARM: socfpga: Drop unneeded select of PCI_DOMAINS_GENERIC

2020-05-15T21:27:38Z

Support for Altera SOCFPGA systems depends on ARCH_MULTI_V7, and thus on ARCH_MULTIPLATFORM. As the latter selects PCI_DOMAINS_GENERIC, there is no need for ARCH_SOCFPGA to select PCI_DOMAINS_GENERIC. Link: https://lore.kernel.org/r/20200505150722.1575-16-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven Cc: Dinh Nguyen Acked-by: Arnd Bergmann Acked-by: Dinh Nguyen Signed-off-by: Arnd Bergmann

arm: socfpga: execute cold reboot by default

2019-11-22T18:12:10Z

This changes system reboot for socfpga to issue a cold reboot by default instead of a warm reboot. Warm reboot can still be used by setting reboot_mode to REBOOT_WARM (e.g. via kernel command line 'reboot='), but this patch ensures cold reboot is issued for both REBOOT_COLD and REBOOT_HARD. Also, cold reboot is more fail safe than warm reboot has some issues at least fo CSEL=0 and BSEL=qspi, where the boot rom does not set the qspi clock to a valid range. Signed-off-by: Simon Goldschmidt Signed-off-by: Dinh Nguyen

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman