linux-dev/arch/arm64/boot/dts/broadcom/northstar2, branch master

Merge tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

2022-05-06T20:12:38Z

Minor cleanup of ARM64 DTS for v5.19 Align SPI NOR node names and freq-table-hz to DT schema. Drop unused/undocumented dma-channels/dma-requests. * tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: broadcom: drop useless 'dma-channels/requests' properties arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties arm64: dts: marvell: align SPI NOR node name with dtschema arm64: dts: microchip: align SPI NOR node name with dtschema arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS Link: https://lore.kernel.org/r/20220506081438.149192-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann

arm64: dts: broadcom: drop useless 'dma-channels/requests' properties

2022-05-04T08:26:56Z

The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220430121902.59895-6-krzysztof.kozlowski@linaro.org

arm64: dts: broadcom: align SPI NOR node name with dtschema

2022-04-07T18:57:07Z

The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski Signed-off-by: Florian Fainelli

arm64: dts: ns2: Fix spi clock name

2022-03-07T19:18:11Z

SPI clock name for pl022 is "sspclk" and not "spiclk". Also fix below dtc warning: clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk'] Signed-off-by: Kuldeep Singh Signed-off-by: Florian Fainelli

arm64: dts: broadcom: Fix sata nodename

2022-03-01T21:29:28Z

After converting ahci-platform txt binding to yaml nodename is reported as not matching the standard: arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml: ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$' Fix it to match binding. Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Signed-off-by: Frank Wunderlich Signed-off-by: Florian Fainelli

arm64: dts: ns2: Fix spi-cpol and spi-cpha property

2022-02-28T21:31:01Z

Broadcom ns2 platform has spi-cpol and spi-cpho properties set incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are of flag or boolean type and not integer type. Fix the values. Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2) Signed-off-by: Kuldeep Singh CC: Ray Jui CC: Scott Branden CC: Florian Fainelli

arm64: dts: broadcom: align pl330 node name with dtschema

2022-02-01T00:29:06Z

Fixes dtbs_check warnings like: dma@310000: $nodename:0: 'dma@310000' does not match '^dma-controller(@.*)?$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Florian Fainelli

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-10-24T17:44:18Z

Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...

arm64: dts: ns2: Fixed QSPI compatible string

2020-09-09T21:14:06Z

The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: ff73917d38a6 ("ARM64: dts: Add QSPI Device Tree node for NS2") Signed-off-by: Florian Fainelli

arm64: dts: broadcom: Fix SP805 clock-names

2020-08-31T03:57:07Z

The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for Broadcom platforms to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara Reviewed-by: Ray Jui Acked-by: Florian Fainelli Signed-off-by: Florian Fainelli