linux-dev/arch/arm64/boot/dts/broadcom/stingray, branch linus/master

Merge tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

2022-05-06T20:12:38Z

Minor cleanup of ARM64 DTS for v5.19 Align SPI NOR node names and freq-table-hz to DT schema. Drop unused/undocumented dma-channels/dma-requests. * tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: broadcom: drop useless 'dma-channels/requests' properties arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties arm64: dts: marvell: align SPI NOR node name with dtschema arm64: dts: microchip: align SPI NOR node name with dtschema arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS Link: https://lore.kernel.org/r/20220506081438.149192-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann

arm64: dts: broadcom: drop useless 'dma-channels/requests' properties

2022-05-04T08:26:56Z

The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220430121902.59895-6-krzysztof.kozlowski@linaro.org

arm64: dts: broadcom: align SPI NOR node name with dtschema

2022-04-07T18:57:07Z

The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski Signed-off-by: Florian Fainelli

arm64: dts: stingray: Fix spi clock name

2022-03-07T19:18:11Z

SPI clock name for pl022 is "sspclk" and not "spiclk". Also fix below dtc warning: clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk'] Signed-off-by: Kuldeep Singh Signed-off-by: Florian Fainelli

arm64: dts: broadcom: align pl330 node name with dtschema

2022-02-01T00:29:06Z

Fixes dtbs_check warnings like: dma@310000: $nodename:0: 'dma@310000' does not match '^dma-controller(@.*)?$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Florian Fainelli

arm64: dts: broadcom: normalize the node name of the UART devices

2021-05-20T18:45:43Z

Change the node name of the UART devices to match "^serial(@[0-9a-f,]+)*$". Signed-off-by: Zhen Lei Signed-off-by: Florian Fainelli

Merge tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-02-21T02:34:53Z

Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32-bit machines, this time two thirds of the code changes are for 64-bit. The usual updates to existing files include: - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA, nomadik, stm32, Allwinner, TI Keystone - Support for additional devices on existing machines on Renesas, SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom, ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic, Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung, stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm, i.MX, Rockchip, ASpeed, Zynq Only three new SoCs this time, but a number of boards across: Renesas: - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based) Intel SoCFPGA: - eASIC N5X board (N5X) ST-Ericsson Ux500: - Samsung GT-I9070 (Janice) phone (u8500) TI OMAP: - MYIR Tech Limited development board (AM335X) Allwinner/sunxi: - SL631 Action Camera (V3) - PineTab Early Adopter tablet (A64) Broadcom: - BCM4906 networking chip - Netgear R8000P router (BCM4906) AMLogic: - Hardkernel ODROID-HC4 development board (SM1) - Beelink GS-King-X TV Box (S922X) Qualcomm: - Snapdragon 888 / SM8350 high-end phone SoC - Qualcomm SDX55 5G modem as standalone SoC - Snapdragon MTP reference board (SM8350) - Snapdragon MTP reference board (SDX55) - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094) - Alcatel Idol 3 phone (MSM8916) - ASUS Zenfone 2 Laser phone (MSM8916) - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916) - OnePlus6 phone (SDM845) - OnePlus6T phone (SDM845) - Alfa Network AP120C-AC access point (IPQ4018) NXP i.MX6 (32-bit): - Plymovent BAS base system controller for filter systems (imx6dl) - Protonic MVT industrial touchscreen terminals (imx6dl) - Protonic PRTI6G reference board (imx6ul) - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp) NXP i.MX8 (64-bit) - Beacon i.MX8M Nano development kit (imx8mn) - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm) - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm) - phyBOARD-Pollux-i.MX8MP (imx8mp) - Purism Librem5 Evergreen phone (imx8mp) - Kontron SMARC-sAL28 system-on-module(imx8mp) Rockchip: - NanoPi M4B Single-board computer (RK3399) - Radxa Rock Pi E router SBC (RK3328) ASpeed: - Ampere Mt. Jade, a BMC for an x86 server (AST2500) - IBM Everest, a BMC for a Power10 server (AST2600) - Supermicro x11spi, a BMC for an ARM server (AST2500) Zynq: - Ebang EBAZ4205, FPGA board (Zynq-7000) - ZynqMP zcu104 revC reference platform (ZynqMP)" * tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits) ARM: dts: aspeed: align GPIO hog names with dtschema ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ...

arm64: dts: broadcom: Remove SATA from Stingray

2021-01-27T00:26:33Z

Remove SATA from Stingray as it is unsupported. Acked-by: Ray Jui Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli

arm64: dts: broadcom: Fix USB DMA address translation for Stingray

2021-01-22T22:35:41Z

Add a non-empty dma-ranges so that DMA address translation happens. Fixes: 2013a4b684b6 ("arm64: dts: broadcom: clear the warnings caused by empty dma-ranges") Signed-off-by: Bharat Gooty Signed-off-by: Rayagonda Kokatanur Reviewed-by: Arnd Bergmann Acked-by: Ray Jui Signed-off-by: Florian Fainelli Signed-off-by: Arnd Bergmann

arm64: dts: broadcom: clear the warnings caused by empty dma-ranges

2020-11-17T14:08:43Z

The scripts/dtc/checks.c requires that the node have empty "dma-ranges" property must have the same "#address-cells" and "#size-cells" values as the parent node. Otherwise, the following warnings is reported: arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #address-cells (1) differs from / (2) arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \ (dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \ its #size-cells (1) differs from / (2) Arnd Bergmann figured out why it's necessary: Also note that the #address-cells=<1> means that any device under this bus is assumed to only support 32-bit addressing, and DMA will have to go through a slow swiotlb in the absence of an IOMMU. Suggested-by: Arnd Bergmann Signed-off-by: Zhen Lei Link: https://lore.kernel.org/r/20201016090833.1892-2-thunder.leizhen@huawei.com' Acked-by: Florian Fainelli Signed-off-by: Arnd Bergmann