arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios

2022-09-02T16:11:28Z

Use the correct names for scl-gpios and sda-gpios so that the generic i2c recovery code will find them. While we're here set the GPIO_OPEN_DRAIN flag on the gpios. Fixes: b795fadfc46b ("arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board") Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: add support for Methode eDPU

2022-09-02T16:11:27Z

Methode eDPU is an Armada 3720 powered board based on the Methode uDPU. They feature the same CPU, RAM, and storage as well as the form factor. However, eDPU only has one SFP slot plus a copper G.hn port. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: split Methode uDPU DTS

2022-09-02T16:11:26Z

Split the Methode uDPU DTS into a common DTSI as preparation for adding support for Methode eDPU which is based on the uDPU to avoid duplication. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: rename temp sensor nodes

2022-09-02T14:56:36Z

Rename the temperature sensor nodes to use "temp-sensor" which matches their device class instead of IC specific naming. Remove the status = "okay" which is not required as its default anyway. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: uDPU: remove LED node pinctrl-names

2022-09-02T14:56:36Z

Using pinctrl-names requires the appropriate pinctrl-0 property, otherwise it is not utilized at all. Since its not required, just remove it. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: uDPU: align LED-s with bindings

2022-09-02T14:56:36Z

According to bindings they LED-s should be prefixed with "led" in this use case, so fix accordingly. Signed-off-by: Robert Marko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: uDPU: add missing SoC compatible

2022-09-02T14:56:36Z

According to the bindings, all boards using Armada 37xx SoC-s must have "marvell,armada3710" compatible while 3720 based ones should also have "marvell,armada3720" before it. Signed-off-by: Robert Marko Acked-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatible

2022-09-02T14:56:36Z

Espressobin Ultra is part of the Espressobin family and shares the basic design, so add the generic "globalscale,espressobin" compatible to it as well. Signed-off-by: Robert Marko Acked-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT

arm64: dts: marvell: Add UART1-3 for AC5/AC5X

2022-09-02T14:05:25Z

The AC5/AC5X SoC has 4 UART blocks. Add the additional UART1-3 blocks to the base dtsi file. Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-08-03T23:29:08Z

Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...

linux-dev/arch/arm64/boot/dts/marvell, branch master

arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios

arm64: dts: marvell: add support for Methode eDPU

arm64: dts: marvell: split Methode uDPU DTS

arm64: dts: marvell: rename temp sensor nodes

arm64: dts: marvell: uDPU: remove LED node pinctrl-names

arm64: dts: marvell: uDPU: align LED-s with bindings

arm64: dts: marvell: uDPU: add missing SoC compatible

arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatible

arm64: dts: marvell: Add UART1-3 for AC5/AC5X

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next