linux-dev/arch/arm64/boot/dts/ti, branch linus/masterLinux kernel development work - see feature brancheshttps://git.zx2c4.com/linux-dev/atom/arch/arm64/boot/dts/ti?h=linus%2Fmaster2022-05-05T17:15:16Zarm64: dts: ti: k3-j721e-sk: Enable HDMI2022-05-05T17:15:16ZRahul T Rr-ravikumar@ti.com2022-05-05T09:07:09Zurn:sha1:7d4686fc3c2ad9bfd1eaf3c54515d6469e542578
Add node for dvi bridge and the endpoint nodes to
describe connection from
DSS => TI TFP410 DPI-to-DVI Bridge => HDMI connector.
Also add the required pinmux for HDMI hotplug and
powerdown
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220505090709.9252-3-r-ravikumar@ti.com
arm64: dts: ti: k3-j721e-sk: Enable DisplayPort2022-05-05T17:15:16ZRahul T Rr-ravikumar@ti.com2022-05-05T09:07:08Zurn:sha1:d4f3c8a169ab82b91ba1e10a495e900477a75cf5
Add the endpoint nodes to describe connection from
DSS => MHDP => DisplayPort connector.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220505090709.9252-2-r-ravikumar@ti.com
arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm2022-05-05T17:15:16ZTomi Valkeinentomi.valkeinen@ti.com2022-04-29T11:26:39Zurn:sha1:8f984f60f2f1fa109f9ae8c9194b6989f6675c1d
Add the endpoint nodes to describe connection from
DSS => MHDP => DisplayPort connector.
Also add the required pinmux nodes for hotplug.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220429112639.13004-3-r-ravikumar@ti.com
arm64: dts: ti: k3-j721e-*: add DP & DP PHY2022-05-05T17:15:16ZTomi Valkeinentomi.valkeinen@ti.com2022-04-29T11:26:38Zurn:sha1:92c996f4ceabd5780bb7678138267db0a1e1a00e
Add DT nodes for DisplayPort and DisplayPort PHY. The DP is Cadence MHDP
8546 and the PHY is a Cadence Torrent PHY with TI WIZ wrapper.
Also add the required phy link nodes in the board dts files.
A slight irregularity in the bindings is the DPTX PHY register block,
which is in the MHDP IP, but is needed and mapped by the PHY.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20220429112639.13004-2-r-ravikumar@ti.com
arm64: dts: ti: k3-am62: Add SA3UL ranges in cbass_main2022-04-29T07:06:46ZJayesh Choudharyj-choudhary@ti.com2022-04-12T07:50:08Zurn:sha1:c024c46fe13bb9e9a70d044fd2d63dbee82bbb59
Add the address space for SA3UL to the ranges property of the
cbass_main node.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220412075008.10553-1-j-choudhary@ti.com
arm64: dts: ti: k3-am62: Add support for MCAN2022-04-27T14:37:34ZAswath Govindrajua-govindraju@ti.com2022-04-18T11:58:01Zurn:sha1:2492a974022081935fbcb0f1bf8a80fc39812806
AM62 SoC has one instance of MCAN in main domain. However, its
corresponding CAN signals are not brought out through a transceiver, on the
SK board. Therefore, add the device tree node in the main dt file and set
the status to disabled in the SK board dts file.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220418115802.5672-1-a-govindraju@ti.com
arm64: dts: ti: k3-am62-mcu: Enable MCU GPIO module2022-04-27T13:45:20ZVignesh Raghavendravigneshr@ti.com2022-04-21T06:19:38Zurn:sha1:d196d2a98d62c505ab71caf2630575e448dc417c
AM62 has x1 GPIO module and associated interrupt router in MCU Domain.
Add DT nodes for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220421061938.122317-1-vigneshr@ti.com
arm64: dts: ti: k3-am625-sk: Add ECAP APWM nodes2022-04-27T13:44:04ZVignesh Raghavendravigneshr@ti.com2022-04-19T06:29:02Zurn:sha1:bd67e1be98ddb884ff3f3df95c2382e6e70930b6
AM62 has 3 ECAP instances with 1 APWM each. Add DT nodes for the same.
Keep them disabled in am625-sk dts as these pins can be repurposed in
user exp connector.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220419062902.196526-1-vigneshr@ti.com
arm64: dts: ti: k3-am625-sk: Enable on board peripherals2022-04-27T10:25:53ZVignesh Raghavendravigneshr@ti.com2022-04-27T07:29:54Zurn:sha1:d19a66ae488afe23398090b5dbe5483b26863e13
Add nodes for I2C IO expander, OSPI Flash, Eth PHYs, SD and eMMC that
are present on AM625 SK board.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220427072954.8821-3-vigneshr@ti.com
arm64: dts: ti: k3-am62: Add more peripheral nodes2022-04-27T10:25:53ZVignesh Raghavendravigneshr@ti.com2022-04-27T07:29:53Zurn:sha1:c37c58fdeb8a9ddaff2ae512bf738ac7a5d3cd2e
Add nodes for McSPI, OSPI, DMA, CPSW, MMC and On Chip SRAM nodes.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220427072954.8821-2-vigneshr@ti.com