linux-dev/arch/arm64/mm/Makefile, branch master

arm64: trans_pgd: hibernate: Add trans_pgd_copy_el2_vectors

2021-10-01T12:30:59Z

Users of trans_pgd may also need a copy of vector table because it is also may be overwritten if a linear map can be overwritten. Move setup of EL2 vectors from hibernate to trans_pgd, so it can be later shared with kexec as well. Signed-off-by: Pasha Tatashin Acked-by: Catalin Marinas Link: https://lore.kernel.org/r/20210930143113.1502553-3-pasha.tatashin@soleen.com Signed-off-by: Will Deacon

Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2021-02-26T18:28:35Z

Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...

arm64: hibernate: move page handling function to new trans_pgd.c

2021-01-27T15:41:11Z

Now, that we abstracted the required functions move them to a new home. Later, we will generalize these function in order to be useful outside of hibernation. Signed-off-by: Pavel Tatashin Reviewed-by: James Morse Link: https://lore.kernel.org/r/20210125191923.1060122-4-pasha.tatashin@soleen.com Signed-off-by: Will Deacon

numa: Move numa implementation to common code

2021-01-14T23:08:55Z

ARM64 numa implementation is generic enough that RISC-V can reuse that implementation with very minor cosmetic changes. This will help both ARM64 and RISC-V in terms of maintanace and feature improvement Move the numa implementation code to common directory so that both ISAs can reuse this. This doesn't introduce any function changes for ARM64. Signed-off-by: Atish Patra Acked-by: Jonathan Cameron Tested-by: Jonathan Cameron Acked-by: Catalin Marinas Signed-off-by: Palmer Dabbelt

Merge branch 'for-next/mte' into for-next/core

2020-10-02T11:16:11Z

Add userspace support for the Memory Tagging Extension introduced by Armv8.5. (Catalin Marinas and others) * for-next/mte: (30 commits) arm64: mte: Fix typo in memory tagging ABI documentation arm64: mte: Add Memory Tagging Extension documentation arm64: mte: Kconfig entry arm64: mte: Save tags when hibernating arm64: mte: Enable swap of tagged pages mm: Add arch hooks for saving/restoring tags fs: Handle intra-page faults in copy_mount_options() arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks arm64: mte: Restore the GCR_EL1 register after a suspend arm64: mte: Allow user control of the generated random tags via prctl() arm64: mte: Allow user control of the tag check mode via prctl() mm: Allow arm64 mmap(PROT_MTE) on RAM-based files arm64: mte: Validate the PROT_MTE request via arch_validate_flags() mm: Introduce arch_validate_flags() arm64: mte: Add PROT_MTE support to mmap() and mprotect() mm: Introduce arch_calc_vm_flag_bits() arm64: mte: Tags-aware aware memcmp_pages() implementation arm64: Avoid unnecessary clear_user_page() indirection ...

arm64/mm/ptdump: Add address markers for BPF regions

2020-09-07T21:04:27Z

Kernel virtual region [BPF_JIT_REGION_START..BPF_JIT_REGION_END] is missing from address_markers[], hence relevant page table entries are not displayed with /sys/kernel/debug/kernel_page_tables. This adds those missing markers. While here, also rename arch/arm64/mm/dump.c which sounds bit ambiguous, as arch/arm64/mm/ptdump.c instead. Signed-off-by: Anshuman Khandual Reviewed-by: Steven Price Cc: Catalin Marinas Cc: Will Deacon Cc: Ard Biesheuvel Cc: Steven Price Cc: Andrew Morton Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1599208259-11191-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon

arm64: mte: Enable swap of tagged pages

2020-09-04T11:46:07Z

When swapping pages out to disk it is necessary to save any tags that have been set, and restore when swapping back in. Make use of the new page flag (PG_ARCH_2, locally named PG_mte_tagged) to identify pages with tags. When swapping out these pages the tags are stored in memory and later restored when the pages are brought back in. Because shmem can swap pages back in without restoring the userspace PTE it is also necessary to add a hook for shmem. Signed-off-by: Steven Price [catalin.marinas@arm.com: move function prototypes to mte.h] [catalin.marinas@arm.com: drop '_tags' from arch_swap_restore_tags()] Signed-off-by: Catalin Marinas Cc: Andrew Morton Cc: Will Deacon

arm64: mm: convert mm/dump.c to use walk_page_range()

2020-02-04T03:05:25Z

Now walk_page_range() can walk kernel page tables, we can switch the arm64 ptdump code over to using it, simplifying the code. Link: http://lkml.kernel.org/r/20191218162402.45610-22-steven.price@arm.com Signed-off-by: Steven Price Reviewed-by: Catalin Marinas Cc: Albert Ou Cc: Alexandre Ghiti Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Arnd Bergmann Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Christian Borntraeger Cc: Dave Hansen Cc: David S. Miller Cc: Heiko Carstens Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: James Hogan Cc: James Morse Cc: Jerome Glisse Cc: "Liang, Kan" Cc: Mark Rutland Cc: Michael Ellerman Cc: Paul Burton Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Russell King Cc: Thomas Gleixner Cc: Vasily Gorbik Cc: Vineet Gupta Cc: Will Deacon Cc: Zong Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

arm64: Add support for CONFIG_DEBUG_VIRTUAL

2017-01-12T15:05:39Z

x86 has an option CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys calls. The goal is to catch users who are calling virt_to_phys on non-linear addresses immediately. This inclues callers using virt_to_phys on image addresses instead of __pa_symbol. As features such as CONFIG_VMAP_STACK get enabled for arm64, this becomes increasingly important. Add checks to catch bad virt_to_phys usage. Reviewed-by: Mark Rutland Tested-by: Mark Rutland Signed-off-by: Laura Abbott Signed-off-by: Will Deacon