linux-dev/arch/cris/Kconfig, branch master

CRIS: Drop support for the CRIS port

2018-03-16T09:56:05Z

The port was added back in 2000 so it's no longer even a good source of inspiration for newer ports (if it ever was) The last SoC (ARTPEC-3) with a CRIS main CPU was launched in 2008. Coupled with time and working developer board hardware being in low supply, it's time to drop the port from Linux. So long and thanks for all the fish! Signed-off-by: Jesper Nilsson Signed-off-by: Arnd Bergmann

cris: use dma-direct

2018-01-15T08:35:16Z

cris currently has an incomplete direct mapping dma_map_ops implementation if PCI support is enabled. Replace it with the fully feature generic dma-direct implementation. Signed-off-by: Christoph Hellwig Acked-by: Jesper Nilsson

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cris: fix Kconfig mismatch when building with CONFIG_PCI

2016-09-22T14:43:17Z

I/O port access. Normally there is no I/O space on CRIS but when Cardbus/PCI is enabled the request is passed through the bridge. lib/pci_iomap.c: In function ‘pci_iomap_range’: lib/pci_iomap.c:43:3: error: implicit declaration of function ‘ioport_map’ [-Werror=implicit-function-declaration] return __pci_ioport_map(dev, start, len); ^ Signed-off-by: Niklas Cassel Signed-off-by: Jesper Nilsson

printk/nmi: generic solution for safe printk in NMI

2016-05-21T00:58:30Z

printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek Suggested-by: Peter Zijlstra Suggested-by: Steven Rostedt Cc: Jan Kara Acked-by: Russell King [arm part] Cc: Daniel Thompson Cc: Jiri Kosina Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Martin Schwidefsky Cc: David Miller Cc: Daniel Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

exit_thread: remove empty bodies

2016-05-21T00:58:30Z

Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby Cc: "David S. Miller" Cc: "H. Peter Anvin" Cc: "James E.J. Bottomley" Cc: Aurelien Jacquiot Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Chen Liqin Cc: Chris Metcalf Cc: Chris Zankel Cc: David Howells Cc: Fenghua Yu Cc: Geert Uytterhoeven Cc: Guan Xuetao Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ivan Kokshaysky Cc: James Hogan Cc: Jeff Dike Cc: Jesper Nilsson Cc: Jiri Slaby Cc: Jonas Bonn Cc: Koichi Yasutake Cc: Lennox Wu Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Mikael Starvik Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Ralf Baechle Cc: Rich Felker Cc: Richard Henderson Cc: Richard Kuo Cc: Richard Weinberger Cc: Russell King Cc: Steven Miao Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

cris: do away with ARCH_REQUIRE_GPIOLIB

2016-04-26T12:04:10Z

Replace "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. Cc: Michael Büsch Cc: Mikael Starvik Cc: linux-cris-kernel@axis.com Acked-by: Jesper Nilsson Signed-off-by: Linus Walleij

cris: time: Cleanup of persistent clock stuff

2015-11-02T19:03:05Z

- Remove update_persistent_clock(), as it does nothing now. - Remove read_persistent_clock(), let it fall back to the weak version. Cc: Mikael Starvik Cc: John Stultz Cc: Arnd Bergmann Signed-off-by: Xunlei Pang Acked-by: Rabin Vincent Signed-off-by: Jesper Nilsson

CRISv32: enable LOCKDEP_SUPPORT

2015-09-04T22:56:50Z

Now that we have stack tracing and irq flags tracing support, we can also enable lockdep support Signed-off-by: Rabin Vincent Signed-off-by: Jesper Nilsson

CRIS: add STACKTRACE_SUPPORT

2015-09-04T22:56:50Z

Add stacktrace support, which is required for lockdep and tracing. The stack tracing simply looks at all kernel text symbols found on the stack, similar to the trap stack dumping code, which can also be converted to use this. Signed-off-by: Rabin Vincent Signed-off-by: Jesper Nilsson