linux-dev/arch/frv/Kconfig, branch master

arch: remove frv port

2018-03-09T22:19:58Z

The Fujitsu FRV kernel port has been around for a long time, but has not seen regular updates in several years and instead was marked 'Orphaned' in 2016 by long-time maintainer David Howells. The SoC product line apparently is apparently still around in the form of the Socionext Milbeaut image processor, but this one no longer uses the FRV CPU cores. This removes all FRV specific files from the kernel. Link: http://www.socionext.com/en/products/assp/milbeaut/ Cc: David Howells Signed-off-by: Arnd Bergmann

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

arch: define CPU_BIG_ENDIAN for all fixed big endian archs

2017-09-09T01:26:48Z

Patch series "Define CPU_BIG_ENDIAN or warn for inconsistencies", v3. While working on enabling queued rwlock on SPARC, found this following code in include/asm-generic/qrwlock.h which uses CONFIG_CPU_BIG_ENDIAN to clear a byte. static inline u8 *__qrwlock_write_byte(struct qrwlock *lock) { return (u8 *)lock + 3 * IS_BUILTIN(CONFIG_CPU_BIG_ENDIAN); } Problem is many of the fixed big endian architectures don't define CPU_BIG_ENDIAN and clears the wrong byte. Define CPU_BIG_ENDIAN for all the fixed big endian architecture to fix it. Also found few more references of this config parameter in drivers/of/base.c drivers/of/fdt.c drivers/tty/serial/earlycon.c drivers/tty/serial/serial_core.c Be aware that this may cause regressions if someone has worked-around problems in the above code already. Remove the work-around. Here is our original discussion https://lkml.org/lkml/2017/5/24/620 Link: http://lkml.kernel.org/r/1499358861-179979-2-git-send-email-babu.moger@oracle.com Signed-off-by: Babu Moger Suggested-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Acked-by: David S. Miller Acked-by: Stafford Horne Cc: Yoshinori Sato Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Alexander Viro Cc: Michal Simek Cc: Michael Ellerman (powerpc) Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Max Filippov Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: always provide the dma_map_ops based implementation

2016-01-21T01:09:18Z

Move the generic implementation to now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig Cc: "David S. Miller" Cc: Aurelien Jacquiot Cc: Chris Metcalf Cc: David Howells Cc: Geert Uytterhoeven Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Helge Deller Cc: James Hogan Cc: Jesper Nilsson Cc: Koichi Yasutake Cc: Ley Foon Tan Cc: Mark Salter Cc: Mikael Starvik Cc: Steven Miao Cc: Vineet Gupta Cc: Christian Borntraeger Cc: Joerg Roedel Cc: Sebastian Ott Signed-off-by: Valentin Rothberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

frv: convert to dma_map_ops

2016-01-21T01:09:18Z

Signed-off-by: Christoph Hellwig Cc: David Howells Cc: Christian Borntraeger Cc: Joerg Roedel Cc: Sebastian Ott Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug

2016-01-09T14:30:49Z

Let all the archs that implement devmem_is_allowed() opt-in to a common definition of CONFIG_STRICT_DEVM in lib/Kconfig.debug. Cc: Kees Cook Cc: Russell King Cc: Will Deacon Cc: Benjamin Herrenschmidt Cc: Martin Schwidefsky Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andrew Morton Cc: Greg Kroah-Hartman Cc: "David S. Miller" Acked-by: Catalin Marinas Acked-by: Heiko Carstens [heiko: drop 'default y' for s390] Acked-by: Ingo Molnar Suggested-by: Arnd Bergmann Signed-off-by: Dan Williams

Remove GENERIC_HARDIRQ config option

2013-09-13T13:09:52Z

After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky

consolidate per-arch stack overflow debugging options

2013-07-04T18:25:39Z

Original posting: http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com Several architectures have similar stack debugging config options. They all pretty much do the same thing, some with slightly differing help text. This patch changes the architectures to instead enable a Kconfig boolean, and then use that boolean in the generic Kconfig.debug to present the actual menu option. This removes a bunch of duplication and adds consistency across arches. Signed-off-by: Dave Hansen Reviewed-by: H. Peter Anvin Reviewed-by: James Hogan Acked-by: Chris Metcalf [for tile] Signed-off-by: Dave Hansen Signed-off-by: Linus Torvalds

Select VIRT_TO_BUS directly where needed

2013-03-12T18:16:40Z

In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds

arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS

2013-02-28T03:10:23Z

Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell Reviewed-by: James Hogan Cc: Bjorn Helgaas Cc: H Hartley Sweeten Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: "David S. Miller" Cc: Paul Mundt Cc: Vineet Gupta Cc: James Bottomley Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds