linux-dev/arch/ia64/lib/Makefile, branch master

ia64: Remove perfmon

2020-09-11T16:34:32Z

perfmon has been marked broken and thus been disabled for all builds for more than two years. Remove it entirely. Cc: Anant Thazhemadam Signed-off-by: Christoph Hellwig Enthusiastically-ACKed-by: Al Viro Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20200911094920.1173631-1-hch@lst.de

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

kill strlen_user()

2017-05-16T03:40:22Z

no callers, no consistent semantics, no sane way to use it... Signed-off-by: Al Viro

ia64: restore symbol versions for symbols defined in assembly

2017-04-14T01:19:49Z

The ia64 build generates many warnings like this: WARNING: EXPORT symbol "empty_zero_page" [vmlinux] version generation failed, symbol will not be versioned. Besides adding the necessary header this also requires fiddling with some explicit .S -> .o rules. Cc: IA64-ML Signed-off-by: Jan Beulich Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds

[kbuild] handle exports in lib-y objects reliably

2016-08-08T03:46:30Z

Collect the symbols exported by anything that goes into lib.a and add an empty object (lib-exports.o) with explicit undefs for each of those to obj-y. That allows to relax the rules regarding the use of exports in lib-* objects - right now an object with export can be in lib-* only if we are guaranteed that there always will be users in built-in parts of the tree, otherwise it needs to be in obj-*. As the result, we have an unholy mix of lib- and obj- in lib/Makefile and (especially) in arch/*/lib/Makefile. Moreover, a change in generic part of the kernel can lead to mysteriously missing exports on some configs. With this change we don't have to worry about that anymore. One side effect is that built-in.o now pulls everything with exports from the corresponding lib.a (if such exists). That's exactly what we want for linking vmlinux and fortunately it's almost the only thing built-in.o is used in. arch/ia64/hp/sim/boot/bootloader is the only exception and it's easy to get rid of now - just turn everything in arch/ia64/lib into lib-* and don't bother with arch/ia64/lib/built-in.o anymore. [AV: stylistic fix from Michal folded in] Acked-by: Michal Marek Signed-off-by: Al Viro

[IA64] export copy_page() to modules

2007-12-08T00:10:19Z

With the unionfs patch applied I get ERROR: "copy_page" [fs/unionfs/unionfs.ko] undefined! the other architectures (some, at least) export copy_page() so I guess ia64 should also do so. To do this we need to move the copy_page() functions out of lib.a and into built-in.o and add the EXPORT_SYMBOL(). Cc: Sam Ravnborg Cc: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Tony Luck

[IA64] always build arch/ia64/lib/xor.o

2007-03-06T22:48:52Z

Always build ia64 xor.o because multiple config options now depend on it. Necessary to build .20-mm* on ia64 when, e.g., CONFIG_ASYNC_TX_DMA is defined. Don't know if '_ASYNC_TX_DMA makes sense on ia64. If not, maybe Kconfig should preclude it. Could have defined a Kconfig option that defaults to true if MD_RAID456 || ASYNC_TX_DMA to control building of xor.o, but xor.o is only 848 bytes and this IS ia64... Signed-off-by: Lee Schermerhorn Cc: Bob Picco Cc: Eric Whitney Signed-off-by: Andrew Morton Signed-off-by: Tony Luck

[PATCH] Fix RAID5 + IA64 compile

2006-08-03T17:04:27Z

CONFIG_MD_RAID5 became CONFIG_MD_RAID456 in drivers/md/Kconfig. Make the same change in arch/ia64 Signed-off-by: Prarit Bhargava Signed-off-by: Aron Griffis Acked-by: Jes Sorenson Signed-off-by: Tony Luck

[PATCH] bitops: ia64: use generic bitops

2006-03-26T16:57:12Z

- remove generic_fls64() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove sched_find_first_bit() Signed-off-by: Akinobu Mita Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Update from upstream with manual merge of Yasunori Goto's

2005-10-20T17:41:44Z

changes to swiotlb.c made in commit 281dd25cdc0d6903929b79183816d151ea626341 since this file has been moved from arch/ia64/lib/swiotlb.c to lib/swiotlb.c Signed-off-by: Tony Luck