linux-dev/arch/ia64/sn/kernel/sn2, branch master

ia64: remove support for the SGI SN2 platform

2019-08-16T18:33:57Z

The SGI SN2 (early Altix) is a very non-standard IA64 platform that was at the very high end of even IA64 hardware, and has been discontinued a long time ago. Remove it because there no upstream users left, and it has magic hooks all over the kernel. Signed-off-by: Christoph Hellwig Link: https://lkml.kernel.org/r/20190813072514.23299-16-hch@lst.de Signed-off-by: Tony Luck

ia64/tlb: Eradicate tlb_migrate_finish() callback

2019-04-03T08:33:04Z

Only ia64-sn2 uses this as an optimization, and there it is of questionable correctness due to the mm_users==1 test. Remove it entirely. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Signed-off-by: Ingo Molnar

ia64: prefix header search path with $(srctree)/

2019-03-13T17:39:09Z

Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). I removed some header search paths because I was able to build ia64 without them. [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada

proc: introduce proc_create_single{,_data}

2018-05-16T05:23:35Z

Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ia64/sn/hwperf: Replace racy task affinity logic

2017-04-15T10:20:53Z

sn_hwperf_op_cpu() which is invoked from an ioctl requires to run code on the requested cpu. This is achieved by temporarily setting the affinity of the calling user space thread to the requested CPU and reset it to the original affinity afterwards. That's racy vs. CPU hotplug and concurrent affinity settings for that thread resulting in code executing on the wrong CPU and overwriting the new affinity setting. Replace it by using work_on_cpu_safe() which guarantees to run the code on the requested CPU or to fail in case the CPU is offline. Signed-off-by: Thomas Gleixner Cc: Fenghua Yu Cc: Tony Luck Cc: linux-ia64@vger.kernel.org Cc: Herbert Xu Cc: "Rafael J. Wysocki" Cc: Peter Zijlstra Cc: Benjamin Herrenschmidt Cc: Sebastian Siewior Cc: Lai Jiangshan Cc: Viresh Kumar Cc: Michael Ellerman Cc: Tejun Heo Cc: "David S. Miller" Cc: Len Brown Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1704122251450.2548@nanos Signed-off-by: Thomas Gleixner

sched/headers: Prepare to remove the dependency from

2017-03-02T07:42:37Z

Update code that relied on sched.h including various MM types for them. This will allow us to remove the include from . Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

scripts/spelling.txt: add "partiton" pattern and fix typo instances

2017-02-28T02:43:46Z

Fix typos and add the following to the scripts/spelling.txt: partiton||partition Link: http://lkml.kernel.org/r/1481573103-11329-7-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12Z

There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds