linux-dev/arch/m68k/mm/kmap.c, branch linus/master

m68k: Introduce a virtual m68k machine

2022-04-11T09:48:01Z

This machine allows to have up to 3.2 GiB and 128 Virtio devices. It is based on android goldfish devices. Signed-off-by: Laurent Vivier Link: https://lore.kernel.org/r/20220406201523.243733-5-laurent@vivier.eu Signed-off-by: Geert Uytterhoeven

m68k: Remove set_fs()

2021-09-24T11:35:07Z

Add a m68k-only set_fc helper to set the SFC and DFC registers for the few places that need to override it for special MM operations, but disconnect that from the deprecated kernel-wide set_fs() API. Note that the SFC/DFC registers are context switched, so there is no need to disable preemption. Partially based on an earlier patch from Linus Torvalds . Signed-off-by: Christoph Hellwig Reviewed-by: Michael Schmitz Tested-by: Michael Schmitz Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de Signed-off-by: Geert Uytterhoeven

mm: remove unneeded includes of

2020-08-07T18:33:26Z

Patch series "mm: cleanup usage of " Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in and enable use of the generic functions where appropriate. In addition, functions declared and defined in headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the included all over the place. The first patch in this series removes unneeded includes of In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in and do not require that header. As for the other header files that used to include , it is possible to move that include into the .c file that actually uses symbols from and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Pekka Enberg Acked-by: Geert Uytterhoeven [m68k] Cc: Abdul Haleem Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Christophe Leroy Cc: Joerg Roedel Cc: Max Filippov Cc: Peter Zijlstra Cc: Satheesh Rajendran Cc: Stafford Horne Cc: Stephen Rothwell Cc: Steven Rostedt Cc: Joerg Roedel Cc: Matthew Wilcox Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds

m68k: mm: Restructure Motorola MMU page-table layout

2020-02-10T09:57:48Z

The Motorola 68xxx MMUs, 040 (and later) have a fixed 7,7,{5,6} page-table setup, where the last depends on the page-size selected (8k vs 4k resp.), and head.S selects 4K pages. For 030 (and earlier) we explicitly program 7,7,6 and 4K pages in %tc. However, the current code implements this mightily weird. What it does is group 16 of those (6 bit) pte tables into one 4k page to not waste space. The down-side is that that forces pmd_t to be a 16-tuple pointing to consecutive pte tables. This breaks the generic code which assumes READ_ONCE(*pmd) will be word sized. Therefore implement a straight forward 7,7,6 3 level page-table setup, with the addition (for 020/030) of (partial) large-page support. For now this increases the memory footprint for pte-tables 15 fold. Tested with ARAnyM/68040 emulation. Suggested-by: Will Deacon Signed-off-by: Peter Zijlstra (Intel) Acked-by: Will Deacon Acked-by: Greg Ungerer Tested-by: Michael Schmitz Tested-by: Greg Ungerer Link: https://lore.kernel.org/r/20200131125403.711478295@infradead.org Signed-off-by: Geert Uytterhoeven

m68k: mm: use pgtable-nopXd instead of 4level-fixup

2019-12-05T03:44:15Z

m68k has two or three levels of page tables and can use appropriate pgtable-nopXd and folding of the upper layers. Replace usage of include/asm-generic/4level-fixup.h and explicit definitions of __PAGETABLE_PxD_FOLDED in m68k with include/asm-generic/pgtable-nopmd.h for two-level configurations and with include/asm-generic/pgtable-nopud.h for three-lelve configurations and adjust page table manipulation macros and functions accordingly. [akpm@linux-foundation.org: fix merge glitch] [geert@linux-m68k.org: more merge glitch fixes] [akpm@linux-foundation.org: s/bad_pgd/bad_pud/, per Mike] Link: http://lkml.kernel.org/r/1572938135-31886-6-git-send-email-rppt@kernel.org Signed-off-by: Mike Rapoport Acked-by: Greg Ungerer Cc: Anatoly Pugachev Cc: Anton Ivanov Cc: Arnd Bergmann Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Jeff Dike Cc: "Kirill A. Shutemov" Cc: Mark Salter Cc: Matt Turner Cc: Michal Simek Cc: Peter Rosin Cc: Richard Weinberger Cc: Rolf Eike Beer Cc: Russell King Cc: Russell King Cc: Sam Creasey Cc: Vincent Chen Cc: Vineet Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

m68k: rename __iounmap and mark it static

2019-11-11T20:18:19Z

m68k uses __iounmap as the name for an internal helper that is only used for some CPU types. Mark it static, give it a better name and move it around a bit to avoid a forward declaration. Signed-off-by: Christoph Hellwig Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

2018-06-05T17:51:30Z

Pull m68knommu updates from Greg Ungerer: "These changes all relate to converting the IO access functions for the ColdFire (and all other non-MMU m68k) platforms to use asm-generic IO instead. This makes the IO support the same on all ColdFire (regardless of MMU enabled or not) and means we can now support PCI in non-MMU mode. As a bonus these changes remove more code than they add" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix ColdFire PCI config reads and writes m68k: introduce iomem() macro for __iomem conversions m68k: allow ColdFire PCI bus on MMU and non-MMU configuration m68k: fix ioremapping for internal ColdFire peripherals m68k: fix read/write multi-byte IO for PCI on ColdFire m68k: don't redefine access functions if we have PCI m68k: remove old ColdFire IO access support code m68k: use io_no.h for MMU and non-MMU enabled ColdFire m68k: setup PCI support code in io_no.h m68k: group io mapping definitions and functions m68k: rework raw access macros for the non-MMU case m68k: use asm-generic/io.h for non-MMU io access functions m68k: put definition guards around virt_to_phys and phys_to_virt m68k: move *_relaxed macros into io_no.h and io_mm.h

m68k: fix ioremapping for internal ColdFire peripherals

2018-05-27T23:45:27Z

The ColdFire SoC internal peripherals are mapped into virtual address space using the ACR registers of the cache control unit. This means we are using a 1:1 physical:virtual mapping for them that does not rely on page table mappings. We can quickly determine if we are accessing an internal peripheral device given the physical or vitrual address using the same range check. The implications of this mapping is that an ioremap should return the physical address as the virtual mapping __iomem cookie as well. So fix ioremap() to deal with this on ColdFire. Of course you need to take care of this in the iounmap() path as well. Reported-by: Angelo Dureghello Signed-off-by: Greg Ungerer Reviewed-by: Angelo Dureghello Tested-by: Angelo Dureghello

m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()

2018-05-24T10:00:27Z

If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap between mappings which is added to the vm_struct representing the mapping. __ioremap() uses the actual requested size (after alignment), while __iounmap() is passed the size from the vm_struct. On 020/030, early termination descriptors are used to set up mappings of extent 'size', which are validated on unmapping. The unmapped gap of size IO_SIZE defeats the sanity check of the pmd tables, causing __iounmap() to loop forever on 030. On 040/060, unmapping of page table entries does not check for a valid mapping, so the umapping loop always completes there. Adjust size to be unmapped by the gap that had been added in the vm_struct prior. This fixes the hang in atari_platform_init() reported a long time ago, and a similar one reported by Finn recently (addressed by removing ioremap() use from the SWIM driver. Tested on my Falcon in 030 mode - untested but should work the same on 040/060 (the extra page tables cleared there would never have been set up anyway). Signed-off-by: Michael Schmitz [geert: Minor commit description improvements] [geert: This was fixed in 2.4.23, but not in 2.5.x] Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman