linux-dev/arch/mips/alchemy/devboards/db1000.c, branch linus/master

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102

2019-05-24T15:39:00Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman

MIPS: Alchemy: update dma masks for devboard devices

2018-12-23T15:58:31Z

Fix the DMA masks for sound and mmc devices. Verified on DB1300 and DB1500. Signed-off-by: Manuel Lauss Signed-off-by: Paul Burton Cc: Linux-MIPS

MIPS: Alchemy: drop DB1000 IrDA support bits

2018-12-23T15:58:22Z

The IrDA drivers are gone, drop the now unused DB1000 board support for it. Signed-off-by: Manuel Lauss Signed-off-by: Paul Burton Cc: Linux-MIPS

spi: spi-gpio: Rewrite to use GPIO descriptors

2018-02-14T16:02:41Z

This converts the bit-banged GPIO SPI driver to looking up and using GPIO descriptors to get a handle on GPIO lines for SCK, MOSI, MISO and all CS lines. All existing board files are converted in one go to keep it all consistent. With these conversions I rarely find any interrim steps that makes any sense. Device tree probing and GPIO handling should work like before also after this patch. For board files, we stop using controller data to pass the GPIO line for chip select, instead we pass this as a GPIO descriptor lookup like everything else. In some s3c24xx machines the names of the SPI devices were set to "spi-gpio" rather than "spi_gpio" which can never have worked, I fixed it working (I guess) as part of this patch set. Sometimes I wonder how this code got upstream in the first place, it obviously is not tested. mach-s3c64xx/mach-smartq.c has the same problem and additionally defines the *same* GPIO line for MOSI and MISO which is not going to be accepted by gpiolib. As the lines were number 1,2,2 I assumed it was a typo and use lines 1,2,3. A comment gives awat that line 0 is chip select though no actual SPI device is provided for the LCD supposed to be on this bit-banged SPI bus. I left it intact instead of just deleting the bus though. Kill off board file code that try to initialize the SPI lines to the same values that they will later be set by the spi_gpio driver anyways. Given the huge number of weird things in these board files I do not think this code is very tested or put in with much afterthought anyways. In order to assert that we do not get performance regressions on this crucial bing-banged driver, a ran a script like this dumping the Ilitek ILI9322 regmap 10000 times (it has no caching obviously) on an otherwise idle system in two iterations before and after the patches: #!/bin/sh for run in `seq 10000` do cat /debug/regmap/spi0.0/registers > /dev/null done Before the patch: time test.sh real 3m 41.03s user 0m 29.41s sys 3m 7.22s time test.sh real 3m 44.24s user 0m 32.31s sys 3m 7.60s After the patch: time test.sh real 3m 41.32s user 0m 28.92s sys 3m 8.08s time test.sh real 3m 39.92s user 0m 30.20s sys 3m 5.56s So any performance differences seems to be in the error margin. Signed-off-by: Linus Walleij Acked-by: Olof Johansson Reviewed-by: Andy Shevchenko Signed-off-by: Mark Brown

pcmcia: db1xxx_ss: fix last irq_to_gpio user

2016-03-29T20:48:53Z

remove the usage of removed irq_to_gpio() function. On pre-DB1200 boards, pass the actual carddetect GPIO number instead of the IRQ, because we need the gpio to actually test card status (inserted or not) and can get the irq number with gpio_to_irq() instead. Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500, which used irq_to_gpio(). Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") Signed-off-by: Manuel Lauss Acked-by: Arnd Bergmann Reviewed-by: Linus Walleij Cc: linux-pcmcia@lists.infradead.org Cc: Linux-MIPS Cc: stable@vger.kernel.org # v4.3+ Patchwork: https://patchwork.linux-mips.org/patch/12747/ Signed-off-by: Ralf Baechle

MIPS: Remove all the uses of custom gpio.h

2015-09-03T10:08:02Z

Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel Reviewed-by: Linus Walleij Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Cc: Rafał Miłecki Cc: Bartlomiej Zolnierkiewicz Cc: Tejun Heo Cc: Alexandre Courbot Cc: Dmitry Torokhov Cc: Florian Fainelli Cc: Manuel Lauss Cc: Joe Perches Cc: Daniel Walter Cc: Sergey Ryazanov Cc: Huacai Chen Cc: James Hartley Cc: Andrew Bresticker Cc: Paul Burton Cc: Jiri Kosina Cc: Bjorn Helgaas Cc: Wolfram Sang Cc: Randy Dunlap Cc: Varka Bhadram Cc: Masanari Iida Cc: Tomi Valkeinen Cc: Michael Buesch Cc: abdoulaye berthe Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: au1100fb: use clk framework

2014-07-30T12:10:39Z

Use the clock framework to en/disable the clock to the au1100 framebuffer device. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7474/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: introduce helpers to access SYS register block.

2014-07-30T11:53:28Z

This patch changes all absolute SYS_XY registers to offsets from the SYS block base, prefixes them with AU1000 to avoid silent failures due to changed addresses, and introduces helper functions to read/write them. No functional changes, comparing assembly of a few select functions shows no differences. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7464/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: Unify Devboard support.

2014-03-26T22:09:21Z

This patch merges support for all DB1xxx and PB1xxx boards into a single image, along with a new single defconfig for them. Run-tested on DB1300 and DB1500. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/6577/ Patchwork: https://patchwork.linux-mips.org/patch/6659/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: Fix DB1100 GPIO registration

2014-02-04T12:18:02Z

With CONFIG_GPIOLIB=y gpios need to be requested before they can be modified. Request the SD carddetect pins, and drop the SPI direction setup, as the driver does that for us anyway. This gets rid of a lot of WARN_ON()s triggered by GPIO core, and restores functionality of the touschreen controller. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/6497/ Signed-off-by: Ralf Baechle