linux-dev/arch/mips/bcm47xx/Makefile, branch master

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

MIPS: BCM47xx: Move SPROM driver to drivers/firmware/

2016-05-13T12:01:43Z

Broadcom ARM home routers store SPROM content in NVRAM just like MIPS ones. To share SPROM code we need to move it out of arch/mips/ to some common place. We already have bcm47xx_nvram in firmware path and SPROM should fit there as well. This driver is responsible for parsing SoC configuration data into a struct shared between ssb and bcma buses. This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0 (ARCH_BCM_5301X). Signed-off-by: Rafał Miłecki Cc: Hauke Mehrtens Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12210/ Signed-off-by: Ralf Baechle

MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/

2015-06-21T19:55:33Z

After Broadcom switched from MIPS to ARM for their home routers we need to have NVRAM driver in some common place (not arch/mips/). As explained in Kconfig, this driver is responsible for parsing SoC configuration data that is passed to the kernel in flash from the bootloader firmware called "CFE". We were thinking about putting it in bus directory, however there are two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this won't fit there and this is why I would like to move this driver to the drivers/firmware/. Signed-off-by: Rafał Miłecki Reviewed-by: Paul Walmsley Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Cc: Seiji Aguchi Cc: Greg Kroah-Hartman Cc: Ard Biesheuvel Cc: Mike Waychison Cc: Roy Franz Cc: Matt Fleming Cc: Linus Torvalds Patchwork: https://patchwork.linux-mips.org/patch/10544/ Signed-off-by: Ralf Baechle

MIPS: BCM47XX: Add new file for device specific workarounds

2014-03-31T16:17:12Z

Signed-off-by: Rafał Miłecki Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Patchwork: https://patchwork.linux-mips.org/patch/6627/ Signed-off-by: Ralf Baechle

MIPS: BCM47XX: Drop WGT634U hacks

2014-01-24T21:39:52Z

This old wgt634u.c was trying to implement a bit ugly support for Netgear WGT634U. It provided info about LED, flash mapping & layout and was trying to handle reset button. This is not needed anymore as we have replacement for all this stuff. Signed-off-by: Rafał Miłecki Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6302/

MIPS: BCM47XX: Prepare support for GPIO buttons

2014-01-24T21:39:51Z

So far this adds support for one Netgear model only, but it's designed and ready to add many more device. We could hopefully import database from OpenWrt. Support for SSB is currently disabled, because SSB doesn't implement IRQ domain yet. Signed-off-by: Rafał Miłecki Acked-by: Hauke Mehrtens Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6300/

MIPS: BCM47XX: Prepare support for LEDs

2014-01-24T21:39:51Z

So far this is mostly just a proof of concept, database consists of a single device. Creating a nice iterateable array wasn't an option because devices have different amount of LEDs. And we don't want to waste memory just because of support for a device with dozens on LEDs. Signed-off-by: Rafał Miłecki Acked-by: Hauke Mehrtens Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6299/

MIPS: BCM47XX: Add board detection

2013-10-29T20:24:00Z

Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle

MIPS: Whitespace cleanup.

2013-02-01T09:00:22Z

Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle

MIPS: BCM47XX: remove GPIO driver

2012-12-12T17:57:49Z

Instated of providing an own GPIO driver use the one provided by ssb and bcma. Signed-off-by: Hauke Mehrtens Patchwork: http://patchwork.linux-mips.org/patch/4592 Acked-by: Florian Fainelli