linux-dev/arch/mips/bcm63xx/boards, branch master

MIPS: BCM63xx: switch to SPDX license identifier

2020-08-17T11:10:31Z

Use SPDX license indentifier instead of local reference to COPYING. Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer

MIPS: BCM63xx: refactor board declarations

2020-08-17T11:10:17Z

Current board declarations are a mess. Let's put some order and make them follow the same structure. Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer

MIPS: BCM63xx: enable EHCI for DWV-S0 board

2020-08-17T11:09:52Z

BCM6358 SoCs have OHCI and EHCI controllers that share the same USB ports. Therefore, the board should also have EHCI enabled. Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer

MIPS: BCM63xx: remove EHCI from BCM6348 boards

2020-08-17T11:09:31Z

There's no EHCI controller on BCM6348. Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer

MIPS: BCM63xx: remove duplicated new lines

2020-08-17T11:09:11Z

There are 3 duplicated new lines, let's remove them. Signed-off-by: Álvaro Fernández Rojas Acked-by: Florian Fainelli Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer

MIPS: BCM63xx: improve CFE version detection

2020-07-24T10:02:46Z

There are some CFE variants that start with 'cfe-vd' instead of 'cfe-v', such as the one used in the Huawei HG556a: "cfe-vd081.5003". In this case, the CFE version is stored as is (string vs number bytes). Some newer devices have an additional version number, such as the Comtrend VR-3032u: "1.0.38-112.118-11". Finally, print the string as is if the version doesn't start with "cfe-v" or "cfe-vd", but starts with "cfe-". Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Thomas Bogendoerfer

MIPS: BCM63xx: add endif comments

2020-06-15T09:59:45Z

There are plenty of ifdefs in board_bcm963xx.c without endif comments. Let's make the code easier to follow by adding proper comments. Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Thomas Bogendoerfer

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

arch: mips: Kconfig: pedantic formatting

2019-03-19T22:34:04Z

Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult Signed-off-by: Paul Burton Cc: linux-kernel@vger.kernel.org Cc: hauke@hauke-m.de Cc: zajec5@gmail.com Cc: f.fainelli@gmail.com Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@vger.kernel.org

MIPS: BCM63XX: drop unused and broken DSP platform device

2018-12-31T15:12:35Z

Trying to register the DSP platform device results in a null pointer access: [ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20 [ 0.135208] Oops[#1]: [ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87 ... [ 0.197117] epc : 804e305c bcm63xx_dsp_register+0x80/0xa4 [ 0.202838] ra : 804e6f20 board_register_devices+0x258/0x390 ... This happens because it tries to copy the passed platform data over the platform_device's unpopulated platform_data. Since this code has been broken since its submission, no driver was ever submitted for it, and apparently nobody was using it, just remove it instead of trying to fix it. Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.") Signed-off-by: Jonas Gorski Signed-off-by: Paul Burton Acked-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: Ralf Baechle Cc: James Hogan