linux-dev/arch/mips/boot/dts/ingenic, branch master

MIPS: dts: align gpio-key node names with dtschema

2022-07-14T09:51:11Z

The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski Acked-by: Arınç ÜNAL Signed-off-by: Thomas Bogendoerfer

MIPS: dts: correct gpio-keys names and properties

2022-07-14T09:50:57Z

gpio-keys children do not use unit addresses. Signed-off-by: Krzysztof Kozlowski Acked-by: Arınç ÜNAL Signed-off-by: Thomas Bogendoerfer

mips: dts: ingenic: Add TCU clock to x1000/x1830 tcu device node

2022-06-21T15:18:39Z

This clock is a gate for the TCU hardware block on these SoCs, but it wasn't included in the device tree since the ingenic-tcu driver erroneously did not request it. Reviewed-by: Paul Cercueil Signed-off-by: Aidan MacDonald Signed-off-by: Thomas Bogendoerfer

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-06-03T18:17:49Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...

MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.

2022-05-23T09:10:01Z

1.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic. 2.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo. 3.The X1830 SoC used by the CU1830-Neo and the X1000 SoC used by the CU1000-Neo are both single-core processors, therefore the "OST_CLK_PERCPU_TIMER" ABI should not be used in the OST nodes of the CU1830-Neo and CU1000-Neo, it is just a coincidence that there is no problem now. So replace the misused "OST_CLK_PERCPU_TIMER" ABI with the correct "OST_CLK_EVENT_TIMER" ABI. Signed-off-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Thomas Bogendoerfer

MIPS: Ingenic: Add PWM nodes for X1830.

2022-05-23T09:09:37Z

Add PWM node for X1830 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Thomas Bogendoerfer

mips: dts: ingenic: x1000: Add PWM device tree node

2022-04-27T08:58:43Z

Copied from the jz4740 devicetree and trimmed to 5 timers, which is what the hardware supports. Signed-off-by: Aidan MacDonald Tested-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Thomas Bogendoerfer

MIPS: Ingenic: Refresh USB nodes to match driver changes.

2022-04-21T17:22:00Z

Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files. Signed-off-by: 周琰杰 (Zhou Yanjie) Link: https://lore.kernel.org/r/1649964337-114337-4-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2022-03-25T16:35:19Z

Pull MIPS updates from Thomas Bogendoerfer: - added support for QCN550x (ath79) - enabled KCSAN - removed TX39XX support - various cleanups and fixes * tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits) MIPS: Fix build error for loongson64 and sgi-ip27 MIPS: ingenic: correct unit node address MIPS: Fix wrong comments in asm/prom.h MIPS: Remove redundant definitions of device_tree_init() MIPS: Remove redundant check in device_tree_init() MIPS: pgalloc: fix memory leak caused by pgd_free() MIPS: RB532: fix return value of __setup handler MIPS: Only use current_stack_pointer on GCC MIPS: boot/compressed: Use array reference for image bounds mips: cdmm: Fix refcount leak in mips_cdmm_phys_base mips: remove reference to "newer Loongson-3" mips: Always permit to build u-boot images MIPS: Sanitise Cavium switch cases in TLB handler synthesizers DEC: Limit PMAX memory probing to R3k systems mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n MIPS: fix fortify panic when copying asm exception handlers mips: ralink: fix a refcount leak in ill_acc_of_setup() mips: Implement "current_stack_pointer" MIPS: Remove TX39XX support MIPS: Modernize READ_IMPLIES_EXEC ...

MIPS: ingenic: correct unit node address

2022-03-18T08:38:34Z

Unit node addresses should not have leading 0x: Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x" Signed-off-by: Krzysztof Kozlowski Reviewed-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer