linux-dev/arch/mips/boot/dts/ralink, branch master

mips: dts: ralink: mt7621: add GB-PC2 LEDs

2022-09-23T09:24:59Z

Add the missing LEDs for GB-PC2. The ethblack-green, ethblue-green, power and system LEDs weren't added previously, because they don't exist on the device schematics. Tests on a GB-PC2 by me and Petr proved otherwise. The i2c bus cannot be used on GB-PC2 as its pins are wired to LEDs instead, and GB-PC1 does not use it. Therefore, do not enable it on both devices. Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf Tested-by: Petr Louda Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: David S. Miller

mips: dts: ralink: mt7621: fix external phy on GB-PC2

2022-09-23T09:24:59Z

The address of the external phy on the mdio bus is 5. Update the devicetree for GB-PC2 accordingly. Fixes: 5bc148649cf3 ("staging: mt7621-dts: fix GB-PC2 devicetree") Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: David S. Miller

mips: dts: ralink: mt7621: change mt7530 switch address

2022-09-23T09:24:59Z

In the case of muxing phy0 of the MT7530 switch, the switch and the phy will have the same address on the mdio bus, 0. This causes the ethernet driver to fail since devices on the mdio bus cannot share an address. Any address can be used for the switch, therefore, change the switch address to 0x1f. Suggested-by: Sungbo Eo Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: David S. Miller

mips: dts: ralink: mt7621: change phy-mode of gmac1 to rgmii

2022-09-23T09:24:59Z

Change phy-mode of gmac1 to rgmii on mt7621.dtsi. Same code path is followed for delayed rgmii and rgmii phy-mode on mtk_eth_soc.c. Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: David S. Miller

mips: dts: ralink: mt7621: remove interrupt-parent from switch node

2022-09-23T09:24:59Z

The interrupt-parent property is inherited from the ethernet node as it's a parent node of the switch node. Therefore, remove the unnecessary interrupt-parent property from the switch node. Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: David S. Miller

mips: dts: ralink: mt7621: fix some dtc warnings

2022-09-23T09:24:58Z

Fix the dtc warnings below. uartlite@c00: $nodename:0: 'uartlite@c00' does not match '^serial(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/serial/8250.yaml uartlite@c00: Unevaluated properties are not allowed ('clock-names' was unexpected) From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/serial/8250.yaml sdhci@1e130000: $nodename:0: 'sdhci@1e130000' does not match '^mmc(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/mmc/mtk-sd.yaml xhci@1e1c0000: $nodename:0: 'xhci@1e1c0000' does not match '^usb(@.*)?' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml xhci@1e1c0000: compatible: ['mediatek,mt8173-xhci'] is too short From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml switch0@0: $nodename:0: 'switch0@0' does not match '^(ethernet-)?switch(@.*)?$' From schema: /home/arinc9/Documents/linux/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml port@1: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml port@2: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml port@3: status:0: 'off' is not one of ['okay', 'disabled', 'reserved'] From schema: /home/arinc9/.local/lib/python3.10/site-packages/dtschema/schemas/dt-core.yaml - Change "memc: syscon@5000" to "memc: memory-controller@5000". - Change "uartlite: uartlite@c00" to "serial0: serial@c00" and remove the aliases node. - Remove "clock-names" from the serial0 node. The property doesn't exist on the 8250.yaml schema. - Change "sdhci: sdhci@1e130000" to "mmc: mmc@1e130000". - Change "xhci: xhci@1e1c0000" to "usb: usb@1e1c0000". - Add "mediatek,mtk-xhci" as the second compatible string on the usb node. - Change "switch0: switch0@0" to "switch0: switch@0" - Change "off" to "disabled" for disabled nodes. Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: David S. Miller

MIPS: dts: align gpio-key node names with dtschema

2022-07-14T09:51:11Z

The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski Acked-by: Arınç ÜNAL Signed-off-by: Thomas Bogendoerfer

Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2022-05-30T18:01:50Z

Pull MIPS updates from Thomas Bogendoerfer: "Cleanups and fixes" * tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits) MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem() MIPS: Kconfig: Fix indentation and add endif comment MIPS: bmips: Fix compiler warning observed on W=1 build MIPS: Rewrite `csum_tcpudp_nofold' in plain C mips: setup: use strscpy to replace strlcpy MIPS: Octeon: add SNIC10E board MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo. MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards. MIPS: Ingenic: Add PWM nodes for X1830. MIPS: Octeon: fix typo in comment MIPS: loongson32: Kconfig: Remove extra space MIPS: Sibyte: remove unnecessary return variable MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation selftests/ftrace: Save kprobe_events to test log MIPS: tools: no need to initialise statics to 0 MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon MIPS: VR41xx: Drop redundant spinlock initialization MIPS: smp: optimization for flush_tlb_mm when exiting ...

mips: dts: ralink: mt7621: remove defining gpio function for pin groups

2022-04-27T08:43:59Z

All pin groups function as gpio unless set otherwise. Therefore, remove this unnecessary binding. Tested on UniElec U7621-06-16M on OpenWrt. Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: Thomas Bogendoerfer

mips: dts: ralink: mt7621: mux phy4 to gmac1 for GB-PC1

2022-04-27T08:43:59Z

Mux the MT7530 switch's phy4 to the SoC's gmac1 on the GB-PC1 devicetree. This achieves 2 Gbps total bandwidth to the CPU using the second RGMII. Signed-off-by: Arınç ÜNAL Reviewed-by: Sergio Paracuellos Signed-off-by: Thomas Bogendoerfer