linux-dev/arch/mips/boot, branch linus/master

mips: dts: ingenic: Add TCU clock to x1000/x1830 tcu device node

2022-06-21T15:18:39Z

This clock is a gate for the TCU hardware block on these SoCs, but it wasn't included in the device tree since the ingenic-tcu driver erroneously did not request it. Reviewed-by: Paul Cercueil Signed-off-by: Aidan MacDonald Signed-off-by: Thomas Bogendoerfer

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-06-03T18:17:49Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...

Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2022-05-30T18:01:50Z

Pull MIPS updates from Thomas Bogendoerfer: "Cleanups and fixes" * tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits) MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem() MIPS: Kconfig: Fix indentation and add endif comment MIPS: bmips: Fix compiler warning observed on W=1 build MIPS: Rewrite `csum_tcpudp_nofold' in plain C mips: setup: use strscpy to replace strlcpy MIPS: Octeon: add SNIC10E board MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo. MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards. MIPS: Ingenic: Add PWM nodes for X1830. MIPS: Octeon: fix typo in comment MIPS: loongson32: Kconfig: Remove extra space MIPS: Sibyte: remove unnecessary return variable MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation selftests/ftrace: Save kprobe_events to test log MIPS: tools: no need to initialise statics to 0 MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon MIPS: VR41xx: Drop redundant spinlock initialization MIPS: smp: optimization for flush_tlb_mm when exiting ...

MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.

2022-05-23T09:10:01Z

1.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic. 2.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo. 3.The X1830 SoC used by the CU1830-Neo and the X1000 SoC used by the CU1000-Neo are both single-core processors, therefore the "OST_CLK_PERCPU_TIMER" ABI should not be used in the OST nodes of the CU1830-Neo and CU1000-Neo, it is just a coincidence that there is no problem now. So replace the misused "OST_CLK_PERCPU_TIMER" ABI with the correct "OST_CLK_EVENT_TIMER" ABI. Signed-off-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Thomas Bogendoerfer

MIPS: Ingenic: Add PWM nodes for X1830.

2022-05-23T09:09:37Z

Add PWM node for X1830 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Thomas Bogendoerfer

MIPS: tools: no need to initialise statics to 0

2022-05-12T16:00:15Z

Static variables do not need to be initialised to 0, because compiler will initialise all uninitialised statics to 0. Thus, remove the unneeded initializations. Signed-off-by: Jason Wang Signed-off-by: Thomas Bogendoerfer

mips: dts: ingenic: x1000: Add PWM device tree node

2022-04-27T08:58:43Z

Copied from the jz4740 devicetree and trimmed to 5 timers, which is what the hardware supports. Signed-off-by: Aidan MacDonald Tested-by: 周琰杰 (Zhou Yanjie) Signed-off-by: Thomas Bogendoerfer

MIPS: mscc: serval: rename pinctrl nodes

2022-04-27T08:48:59Z

The pinctrl device tree binding will be converted to YAML format. Rename the pin nodes so they end with "-pins" to match the schema. Signed-off-by: Michael Walle Signed-off-by: Thomas Bogendoerfer

MIPS: mscc: ocelot: rename pinctrl nodes

2022-04-27T08:48:59Z

The pinctrl device tree binding will be converted to YAML format. Rename the pin nodes so they end with "-pins" to match the schema. Signed-off-by: Michael Walle Signed-off-by: Thomas Bogendoerfer

MIPS: mscc: jaguar2: rename pinctrl nodes

2022-04-27T08:48:59Z

The pinctrl device tree binding will be converted to YAML format. Rename the pin nodes so they end with "-pins" to match the schema. Signed-off-by: Michael Walle Signed-off-by: Thomas Bogendoerfer