linux-dev/arch/powerpc/include/asm/book3s/64, branch master

powerpc/64s: Disable preemption in hash lazy mmu mode

2022-10-18T11:46:18Z

apply_to_page_range on kernel pages does not disable preemption, which is a requirement for hash's lazy mmu mode, which keeps track of the TLBs to flush with a per-cpu array. Reported-by: Guenter Roeck Signed-off-by: Nicholas Piggin Tested-by: Guenter Roeck Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20221013151647.1857994-1-npiggin@gmail.com

powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range

2022-09-30T08:35:52Z

This function does the hash page table update. Hence rename it to indicate this better to avoid confusion with flush_pmd_tlb_range() Signed-off-by: Aneesh Kumar K.V [mpe: Drop unnecessary extern] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220907081941.209501-1-aneesh.kumar@linux.ibm.com

powerpc/64s: Enable KFENCE on book3s64

2022-09-28T09:22:10Z

KFENCE support was added for ppc32 in commit 90cbac0e995d ("powerpc: Enable KFENCE for PPC32"). Enable KFENCE on ppc64 architecture with hash and radix MMUs. It uses the same mechanism as debug pagealloc to protect/unprotect pages. All KFENCE kunit tests pass on both MMUs. KFENCE memory is initially allocated using memblock but is later marked as SLAB allocated. This necessitates the change to __pud_free to ensure that the KFENCE pages are freed appropriately. Based on previous work by Christophe Leroy and Jordan Niethe. Signed-off-by: Nicholas Miehlbradt Reviewed-by: Russell Currey Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220926075726.2846-4-nicholas@linux.ibm.com

powerpc/mm: Make PAGE_KERNEL_xxx macros grep-friendly

2022-09-26T10:58:18Z

Avoid multi-lines to help getting a complete view when using grep. They still remain under the 100 chars limit. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/3bc3f5a51949ee7f52dba36677db23d4337c7995.1662544980.git.christophe.leroy@csgroup.eu

powerpc/mm: Reduce redundancy in pgtable.h

2022-09-26T10:58:18Z

PAGE_KERNEL_TEXT, PAGE_KERNEL_EXEC and PAGE_AGP are the same for all powerpcs. Remove duplicated definitions. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/92254499430d13d99e4a4d7e9ad8e8284cb35380.1662544974.git.christophe.leroy@csgroup.eu

powerpc/mm/64s: Drop p4d_leaf()

2022-09-26T10:58:18Z

Because 64-bit Book3S uses pgtable-nop4d.h, the P4D is folded into the PGD. So P4D entries are actually PGD entries, or vice versa. The other way to think of it is that the P4D is a single entry page table below the PGD. Zero bits of the address are needed to index into the P4D, therefore a P4D entry maps the same size address space as a PGD entry. As explained in the previous commit, there are no huge page sizes supported directly at the PGD level on 64-bit Book3S, so there are also no huge page sizes supported at the P4D level. Therefore p4d_is_leaf() can never be true, so drop the definition and fallback to the default implementation that always returns false. Reviewed-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220903123640.719846-2-mpe@ellerman.id.au

powerpc/mm/64s: Drop pgd_huge()

2022-09-26T10:58:18Z

On powerpc there are two ways for huge pages to be represented in the top level page table, aka PGD (Page Global Directory). If the address space mapped by an individual PGD entry does not correspond to a given huge page size, then the PGD entry points to a non-standard page table, known as a "hugepd" (Huge Page Directory). The hugepd contains some number of huge page PTEs sufficient to map the address space with the given huge page size. On the other hand, if the address space mapped by an individual PGD entry does correspond exactly to a given huge page size, that PGD entry is used to directly encode the huge page PTE in place. In this case the pgd_huge() wrapper indicates to generic code that the PGD entry is actually a huge page PTE. This commit deals with the pgd_huge() case only, it does nothing with respect to the hugepd case. Over time the size of the virtual address space supported on powerpc has increased several times, which means the location at which huge pages can sit in the tree has also changed. There have also been new huge page sizes added, with the introduction of the Radix MMU. On Power9 and later with the Radix MMU, the largest huge page size in any implementation is 1GB. Since the introduction of Radix, 1GB entries have been supported at the PUD level, with both 4K and 64K base page size. Radix has never had a supported huge page size at the PGD level. On Power8 or earlier, which uses the Hash MMU, or Power9 or later with the Hash MMU enabled, the largest huge page size is 16GB. Using the Hash MMU and a base page size of 4K, 16GB has never been a supported huge page size at the PGD level, due to the geometry being incompatible. The two supported huge page sizes (16M & 16GB) both use the hugepd format. Using the Hash MMU and a base page size of 64K, 16GB pages were supported in the past at the PGD level. However in commit ba95b5d03596 ("powerpc/mm/book3s/64: Rework page table geometry for lower memory usage") the page table layout was reworked to shrink the size of the PGD. As a result the 16GB page size now fits at the PUD level when using 64K base page size. Therefore there are no longer any supported configurations where pgd_huge() can be true, so drop the definitions for pgd_huge(), and fallback to the generic definition which is always false. Fixes: ba95b5d03596 ("powerpc/mm/book3s/64: Rework page table geometry for lower memory usage") Reviewed-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220903123640.719846-1-mpe@ellerman.id.au

powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush

2022-09-08T01:11:18Z

Allow PTE changes to avoid flushing the TLB when access permissions are being relaxed, the dirty bit is being set, and the accessed bit is being changed. Relaxing access permissions and setting dirty and accessed bits do not require a flush because the MMU will re-load the PTE and notice the updates (it may also cause a spurious fault). Clearing the accessed bit does not require a flush because of the imprecise PTE accessed bit accounting that is already performed, as documented in ptep_clear_flush_young(). This reduces TLB flushing for some mprotect(2) calls. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Reviewed-by: Christophe Leroy Link: https://lore.kernel.org/r/20220901110334.1618913-1-npiggin@gmail.com

powerpc/mm: Support execute-only memory on the Radix MMU

2022-08-26T01:02:21Z

Add support for execute-only memory (XOM) for the Radix MMU by using an execute-only mapping, as opposed to the RX mapping used by powerpc's other MMUs. The Hash MMU already supports XOM through the execute-only pkey, which is a separate mechanism shared with x86. A PROT_EXEC-only mapping will map to RX, and then the pkey will be applied on top of it. mmap() and mprotect() consumers in userspace should observe the same behaviour on Hash and Radix despite the differences in implementation. Replacing the vma_is_accessible() check in access_error() with a read check should be functionally equivalent for non-Radix MMUs, since it follows write and execute checks. For Radix, the change enables detecting faults on execute-only mappings where vma_is_accessible() would return true. Signed-off-by: Russell Currey Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220817050640.406017-1-ruscur@russell.cc

Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2022-08-06T23:38:17Z

Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...