linux-dev/arch/powerpc/include/asm/opal.h, branch linus/master

powerpc/powernv: Add __init attribute to eligible functions

2021-12-23T11:33:15Z

Some functions defined in 'arch/powerpc/platforms/powernv' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211216220035.605465-12-nick.child@ibm.com

powerpc/powernv: remove the nvlink support

2021-05-02T13:35:32Z

This code was only used by the vfio-nvlink2 code, which itself had no proper use. Drop this huge chunk of code build into every powernv or generic build. Signed-off-by: Christoph Hellwig Acked-by: Greg Kroah-Hartman Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de

powerpc/powernv: Fix type of opal_mpipl_query_tag() addr argument

2021-04-22T10:59:09Z

opal_mpipl_query_tag() takes a pointer to a 64-bit value, which firmware writes a value to. As OPAL is traditionally big endian this value will be big endian. This can be confirmed by looking at the implementation in skiboot: static uint64_t opal_mpipl_query_tag(enum opal_mpipl_tags tag, __be64 *tag_val) { ... *tag_val = cpu_to_be64(opal_mpipl_tags[tag]); return OPAL_SUCCESS; } Fix the declaration to annotate that the value is big endian. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210421125402.1955013-2-mpe@ellerman.id.au

powerpc/powernv: Add OPAL API interface to access secure variable

2019-11-12T13:33:22Z

The X.509 certificates trusted by the platform and required to secure boot the OS kernel are wrapped in secure variables, which are controlled by OPAL. This patch adds firmware/kernel interface to read and write OPAL secure variables based on the unique key. This support can be enabled using CONFIG_OPAL_SECVAR. Signed-off-by: Claudio Carvalho Signed-off-by: Nayna Jain Signed-off-by: Eric Richter [mpe: Make secvar_ops __ro_after_init, only build opal-secvar.c if PPC_SECURE_BOOT=y] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1573441836-3632-2-git-send-email-nayna@linux.ibm.com

powerpc/opal: add MPIPL interface definitions

2019-09-13T14:04:43Z

MPIPL is Memory Preserving IPL supported from POWER9. This enables the kernel to reset the system with memory 'preserved'. Also, it supports copying memory from a source address to some destination address during MPIPL boot. Add MPIPL interface definitions here to leverage these f/w features in adding FADump support for PowerNV platform. Signed-off-by: Hari Bathini Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/156821340710.5656.10071829040515662624.stgit@hbathini.in.ibm.com

powerpc/xive: Fix bogus error code returned by OPAL

2019-09-11T23:27:05Z

There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call to return the 32-bit value 0xffffffff when OPAL has run out of IRQs. Unfortunatelty, OPAL return values are signed 64-bit entities and errors are supposed to be negative. If that happens, the linux code confusingly treats 0xffffffff as a valid IRQ number and panics at some point. A fix was recently merged in skiboot: e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()") but we need a workaround anyway to support older skiboots already in the field. Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error returned upon resource exhaustion. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Greg Kurz Reviewed-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan

Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2019-07-13T23:08:36Z

Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...

powerpc/powernv: remove the unused pnv_pci_set_p2p function

2019-07-01T06:26:55Z

This function has never been used anywhere in the kernel tree since it was added to the tree. We also now have proper PCIe P2P APIs in the core kernel, and any new P2P support should be using those. Signed-off-by: Christoph Hellwig Signed-off-by: Michael Ellerman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/hmi: Fix kernel hang when TB is in error state.

2019-05-02T16:54:57Z

On TOD/TB errors timebase register stops/freezes until HMI error recovery gets TOD/TB back into running state. On successful recovery, TB starts running again and udelay() that relies on TB value continues to function properly. But in case when HMI fails to recover from TOD/TB errors, the TB register stay freezed. With TB not running the __delay() function keeps looping and never return. If __delay() is called while in panic path then system hangs and never reboots after panic. Signed-off-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman